|- If using a primary receiver, Mini V-Bar is compatible with the following 2.4GHz receivers||Spektrum, Jeti, Fasst.|
|- Dimensions||28 x 37 x 13 mm|
|- Weight||11 g|
|Contents||- Mini V-Bar|
|- Patch Cables||3.1" For use with a primary receiver (if you opt NOT to use Satellites)|
Compatibility Notes:, - Mini V-Bar Blueline can, Overview:, The Mini V-Bar is the worlds smallest and lightest 3-axis virtual flybar system. It is designed to fit any small indoor helicopter. Despite its size, the Mini V-Bar is equipped with top-quality sensors and will thus satisfy the highest performance expectations. When light weight is a priority, the Mini V-Bar is your best choice. New version 5.2 Express Software allows for simplified programming and very easy flight tuning!, model helicopters with only a few limitations. Do not use the Mini V-Bar in the following types of helicopters:, - Large Scale heli's, Features:, - Programming is done via Control Panel or via USB using the PC software., Specs:, - 3-Axis Gyro System,Aside from the nice new Blue case, the Mini V-Bar ...
|ESC||Hacker MASTER BASIC 90 OPTO|
|ESC||Jeti Spin 99 OPTO|
|Battery||4250-8S or 5300-8S|
|Propeller||APC 18x10 or 18x12E|
Specification:, , Requirements for Ready to Fly Complete Set (need buy separately):, , Basic power set up:, “Competition” power set up:,Wing Span : 1630mm/64in Length: 1750mm/69in Wing Area: 58sq.dm Weight ...
• SRS technology for use with various bus systems:, Futaba S-Bus, Spektrum DSM2 / DSMX, JR DMSS, HoTT, M-Link and Jeti, Current Drain Power-on State:, Current Drain, GPS:, Maximum Load Current:, Receiver Redundancy:, Servo Sockets:, Servo Signal Resolution:, Gyro Regulation:, Gyro Sensor Type:, Number of Sensor Axes:, Screen OLED:, Dimensions:, Weight:, Temperature Range:,The PowerBox iGyro™ SRS is a completely new type of ...
|• SRS||Serial Receiver System that uses receivers with serial interface|
SRS stands for Serial Receiver System: in contrast to conventional battery backer systems, servo information is transferred using a digital serial signal generated by the receiver. This reduces the number of connections required between the receiver and the PowerBox to a single cable. It is also easy to connect a second receiver to the system, which then assumes control of the model if the first receiver should fail to pick up a signal. In the case of Spektrum and Jeti, only the satellite receivers are connected to the Competition SRS., However, servo-matching also allows functions to be linked, avoiding the need for two channels at the transmitter. As an example: the left and right landing flaps can be operated using just one transmitter channel, as the direction of rotation and the servo end-points are adjusted at the Competition., Operating voltage:, Power source:, Current drain:, Max. receiver and servo current:, Servo signal resolution:, Signal frame rate:, Screen:, Bus systems:, Servo sockets:, Temperature range:, Dimensions:, Weight:, SensorSwitch:, EMV approval:, CE approval:,The PowerBox Competition SRS is the first device in an ...