ReadyMadeRC
1.3GHZ 300MW TRANSMITTER - NEW CUSTOM READYMADERC INTL VERSION
| CH1 | 1258 MHz |
| CH2 | 1280 MHz (ON, OFF) |
| CH3 | 1320 |
| CH4 | 1360 |
| Power requirements | 12V, 500mA (3s lipo) |
| Weight | 30g (transmitter and antenna, no cables) |
Frequencies and DIP switch positions (1, 2):, , Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
WE'VE OPENED UP A WHOLE NEW FREQUENCY FOR LEGAL USE ...ReadyMadeRC
VAS - 2.4 GHZ SKEW-PLANAR WHEEL WHIP ANTENNA RHCP - STRAIGHT
| Gain | .92dbic |
| Beam width | 360 degree doughnut |
| Multipath rejection | 9db |
| Polarization | RHCP |
| Connector | SMA |
ReadyMadeRC
DRAGONOSD TO READYMADERC FEMALE AUDIO/VIDEO ADAPTER
| Includes | 1 adapter cable |
ReadyMadeRC
G-FORCE MICROSENSOR - LOW G SENSOR
| Resolution | approx. 0.05 G in each axis |
| Power input (Standalone Mode) | 4V to 16V (6V max for High G Sensor) |
| Weight | approximately 4 grams (0.15 oz) |
| Dimensions | approximately 28 mm x 16 mm x 10 mm (1.1” x 0.62” x 0.4”) |
There are two models available:, The low G sensor measures up to 8g (at least 7g) in each of the 3 axes.,
3-Axis G-Force Microsensors Need to know how many G's you ...ReadyMadeRC
433MHZ NAGOYA DUAL BAND ANTENNA W/SMA CONNECTOR
| Frequency | 144/430MHz |
| Gain | 2.15db / 3.0db |
| Max power | 10Watts |
| V.S.W.R | Less than 1.5 |
| Impedance | 50 OHM |
| Connector | SMA |
| Length | 396mm Weight |
Specifications:,
An excellent choice for high quality SMA mounted 433MHz antennas. ...ReadyMadeRC
FAT SHARK DOMINATOR 2.4GHZ RECEIVER MODULE
(Note: these frequencies are compatible with Airwave based systems, but with the exception of 2450MHz, they are not compatible with Lawmate 2.4Ghz frequencies.),
2.4GHz video receiver module for the FatShark Dominator video glasses. ...ReadyMadeRC
FY-41AP-A AIRPLANE STABILIZER, AUTOPILOT, AND ON SCREEN DISPLAY
| FY-41AP firmware for fix-wing V1.22 | Download |
| FY module firmware upgrade software and manual | Download |
| The latest FY-DOS&41AP-SETTING software V1.11 for fix-wing | Download |
| FY-41AP manual for fix-wing | Read online |
| More FY-41AP related downloads | Click in |
| FY-41AP OSD display part firmware V1.22a | Download |
| FY module firmware upgrade software and manual | Download |
| Supported servo output | 50Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 6 channels |
| FY-41AP Module Working Voltage | 5.3V@0.2A( Powered by Power Manager) |
| Air speed senor | 0 ~ 200KM/h |
| Power Manager | 35g(50×24×18mm) |
| Working Voltage Range | Power of battery 7~26V (2S ~ 6S) |
| Measuring current | 0~100A |
| Power for FY-41AP module | 5.3V@2A |
| Power for Video transmission system | 12V@2A |
| Operating Temperature | -10°C ~ 50°C |
Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,
Introduction FY-41AP is an inertial attitude measurement instrument used for ...ReadyMadeRC
1.3GHZ VEE ANTENNA (IBCRAZY)
Mounting:, Mount this with the open side of the Vee facing the nose of the airplane when flying distance as this will give a stronger signal for the return trip. Mount it with the Vee facing sideways for stunt flying As this will help keep the antenna in polarization better.,
This is perhaps the best general purpose antenna. Suitable for ...ReadyMadeRC
5.8 GHZ BLUEBEAM OMNI ANTENNA SET (RHCP) (IBCRAZY)
| http | //www.rcgroups.com/forums/showpost.php?p=18484051&postcount=786 |
Note:, Some generic brands of equipment will require an RP-SMA female to SMA female adapter., ATTENTION: It has come to my attention that there is a minor, fixable incompatibility with some Airwave based receivers. The standard 5.8GHz receivers may require a minor modification to fix a problem where the receiver tries to put a small DC bias voltage on the antenna. Please see this forum thread post for the (relatively easy) fix:, , Radiation pattern:,
The BluBeam antenna set is a direct fit circularly polarized ...ReadyMadeRC
2100MAH LOW SELF DISCHARGE FUTABA TRANSMITTER PACK
,
A quality battery pack assembled by CheapBatteryPacks.9.6v 2100mAh Low Self ...ReadyMadeRC
STROBON NAVIGATION STROBE (WHITE) WITH WIRE
,
It’s really a powerful strobe with low power consumption (50mA ...ReadyMadeRC
STROBON NAVIGATION STROBE (GREEN) WITH WIRE
,
It’s really a powerful strobe with low power consumption (50mA ...ReadyMadeRC
STROBON NAVIGATION STROBE (BLUE) WITH WIRE
,
It’s really a powerful strobe with low power consumption (50mA ...ReadyMadeRC
WING SET FOR SKY SURFER WITH INSTALLED SERVOS
,
Wing set for Sky Surfer with factory servos and control ...