ReadyMadeRC
GOPRO MICRO VIDEO/CONTROL BOARD
*Based on some feedback, we have determined that the micro control board is not fully functional when used with the Hero3 cameras. The functionality seems to vary based on the version of the Hero3, and possibly the firmware. Based on the information we have, here is a listing of functionality based on model:,
This adapter has been designed to connect to both GoPro ...DPCAV
HYPERION ATLAS DIGITAL MICRO SERVO, HP-DS13TCB
,
HP-DS13-TCB Hyperion Atlas digital micro servo. Perfect for compact pan ...DPCAV
5.8GHZ A/V RECEIVER WITH ANTENNA DIVERSITY
,
The Duo5800v2 is a high performance 5.8GHz A/V receiver that ...DPCAV
5.8GHZ A/V TRANSMITTER, 200MW
,
SOLD OUT: No longer available. This 5.8GHz / 200mW wireless ...DPCAV
5.8GHZ MICRO RECEIVER, 12V
,
SOLD OUT: No longer available. This pocket sized 5.8GHz wireless ...ngHobbies
LM 2.4GHZ STANDARD RECEIVER
Features:, Frequency Band:, 2400MHz, Number of Channels:, 8, Audio Sub-carrier:, 6.5MHz, Video Output:, 75 Ohm, RCA, Power Consumption:, 240mA, Audio Output:, 10k Ohm, RCA, Power Supply:, 12V/500mA, Antenna Connector:, SMA Connector, Weight:, 95 g, Dimensions:, 80 x 53 x 20 mm, Power Cable:, A power cable to supply power to this recevier from a 3Cell LiPo battery can be found here:, 6" LawMate Power Cable, Documentation:, , Warranty:, 6 months, Note:, Please note this receiver comes without a power supply.,
Highly integrated mini 2.4 GHz receiver with well known quality ...ngHobbies
HITECH HS-65HB HIGH TORQUE ULTRA MICRO SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, Top Ball Bearing, Speed:, 0.14 / 0.11 sec @ 60 deg., Torque:, 24.99 / 30.55 oz.in (4.8v/6v), Size:, 0.92" x 0.45" x 0.94", Weight:, 0.39oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
Considered one of the most powerful servos in the micro ...ngHobbies
ADJUSTABLE 1AMP STEP-DOWN POWER REGULATOR
| Input | 6-23V |
| Output | 3.3V, 5V, 9V or 12V (+/-5%) |
| Load | 1000mA max |
| Efficiency | 75-85% depending on load |
| Width | 17.5mm |
| Height | 5mm |
| Length | 30.5mm |
| Weight | 5 grams |
Specifications:, , Dimensions:, Documentation:,
The New Generation Hobbies1A adjustable step down is a state ...ngHobbies
LENS F2.5MM
| Field of view is | 130 degrees. |
ngHobbies
ARDUPILOT MEGA 2.0 FULLY ASSEMBLED SYSTEM
,
The ArduPilot Mega 2.0 is a complete open source autopilot ...ngHobbies
CABLE FOR THE CCDKILLER CMOS CAMERA
,
This is a replacement cable for the new CCDKiller camera. ...ngHobbies
TWINSTAR FPV PAN/TILT POD KIT
Comes with a mounting plate that will fit many popular FPV cameras including: KX131, KX171, KX191, IF Cam, SN777, SN555 and others. Additional back plates may be purchased here to fit IF OSD Cam, DPC OSD Cam, DX201, Note:, careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., This kit includes:, Laser cut components for the main pod, You'll need:, Double sided servo tape to apply TX, camera, and tilt servo., Documentation:, Instructions to build the pan and tilt:, Click here, Instructions to build the Twinstar Pod:, Coming soon,
a Twinstar FPV pod that uses a custom mechanism allowing ...ngHobbies
NANO CMOS CAMERA (PAL)
| Sensor type | CMOS 4.75mm x 3.55mm |
| Resolution | 786x576 (PAL) |
| Signal processing | DSP |
| Lines | 520TVL |
| Sensitiivity | 0.008Lux/F1.2 |
| Lens included | 0.5mm pinhole/62 degrees |
| S/N Ratio | 48db |
| Video out signal | Standard 1VPP/75ohm |
| Dimensions | 9.5mm x 9.5mm x 12mm |
| Weight | 1gr |
| Power | 3.3V-6V |
| White | Video Out |
| Red | 3.3-6V in |
| Black | Ground |
Specifications:, Scanning type: 2:1 Interlaced, Connection diagram:, Manual:, none,
This is the smallest FPV camera on the market today. ...ngHobbies
OPTICAL RPM SENSOR FOR ELOGGER V3 & V2
Measures your RPM without need for installing magnets. Note: This version is for the eLogger V3 and the V2, which we have been selling since early 2006. The eLogger V2 has the large white letters "V2" (or "U2") on the bottom of the circuit board, near the RPM/Temp pins., Manuals:, eLogger Manual,
Click here for instruction manual. If you are not sure ...