ReadyMadeRC
BOSCAM - TS321 2.4G 500MW AV TRANSMITTER
| Transmitting Power | 500mW/27dBm |
| Transmitting distance | >4000m(open area) |
| Frequency control | built-in frequency and phase lock loop |
| AV input | analog AV signal input |
| ANT connector | SMA(inside the needle) |
| Power supply | 5-12 volts |
| Current supply | 300mA |
| Size | 55*26*17mm |
| Net weight | 43g |
| Gross weight | 52g |
Transmitter frequency:2370-2510MHz; 8CH (Units shipped to US addresses are locked and include channels at 2414MHz and 2432MHz only, no exceptions!), Notes: These use reverse polarity, RP-SMA connectors and may require an adapter with the use of some antennas. Although ImmerseionRC A/V connectors fit, the power/ground will need to be reversed before use., Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
Please do not back order BOSCAM TS321 2.4G 500mW AV ...ReadyMadeRC
BOSCAM TS351 5.8G 200MW AV TRANSMITTER
| Transmitting Power | 200mW/23dBm |
| Transmitting distance | >2000m(open area) |
| Frequency control | built-in frequency and phase lock loop |
| AV input | analog AV signal input |
| ANT connector | SMA(inside the needle) |
| Power supply | 6.5-12 volts |
| Current supply | 200mA |
| Size | 55*26*17mm |
| Net weight | 43g |
| Gross weight | 52g |
Transmitter frequency: Amateur Radio Band, 5865M, 5845M, 5825M, 5805M, 5785M, 5765M, 5745M, 5725M;8CH Not frequency-compatible with FatShark, ImmersionRC, Airwave based equipment, Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
5.8G 200mW AV wireless transmitter They do not work with ...ReadyMadeRC
ZEPHYR MINI Z MOTOR/ESC PACKAGE
| •kV(RPM/V) | 1900 22/10 |
| •Diameter | 28 mm |
| •Length | 30 mm |
| •Weight | 49g |
| •Shaft Diameter | 3.00mm |
| ESC | 30A, w/ switch mode 3A SBEC |
ReadyMadeRC
BOSCAM TS353+RC805 5.8G 400MW FPV KIT
| Transmitter frequency | 5645-5945MHz;8CH |
| Transmitting Power | 400mW/25dBm |
| Transmitting distance | >3500m(open area) |
| Frequency control | built-in frequency and phase lock loop |
| AV input | analog AV signal input |
| ANT connector | SMA(inside the needle) |
| Power supply | 6.5-12volts |
| Current supply | 300mA |
| Size | 55*26*17mm |
| Net weight | 43g |
| Gross weight | 52g |
| Receiving frequency | 5645-5945MHz;8CH |
| Receiving sensitivity | -90dBm |
| Frequency control | built-in frequency and phase lock loop |
| Double lines AV output | analog AV signal output |
| Antenna connector | SMA(Inside the needle) |
| Power supply voltage | 5-12V |
| Supply current | 150mA |
| Dimension | 75*54*15mm |
| Gross weight | 130g |
Notes: These use reverse polarity, RP-SMA connectors and may require an adapter with the use of some antennas. Although ImmerseionRC A/V connectors fit, the power/ground will need to be reversed before use., Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
TS353 5.8G 400mW AV wireless transmitter RC805 New version 5.8G ...ReadyMadeRC
LADYBIRD V2 RTF WITH DEVO 4 RADIO
| 1). Dimensions | 8.5*8.5cm |
| 2). Height | 3cm |
| 3). Weight | 33g |
| 4). Motors (x4) | 0720RN57A-9M-130NL52 |
| 5). Receiver | RX2643H-D |
| 6). Battery | 3.7V 240mAh |
| 7). Radio range | <=100m |
| 8). Flight time | 6-8min |
| 9). Standard transmitter | DEVO 4 |
| 10).Optional transmitter | DEVO 6/7/8s/10/12s |
| 3). Compatible with DEVO series radio | Devo 12S/8S/10/7/7E/6S/2402D.Cute and lifelike appearance similar to Ladybird. |
ReadyMadeRC
NEX N.E.O QUAD FRAME KIT (BOSCAM HD-19 CAMERA MOUNT)
Highlights:, , Specification:,
NEX N.E.O Airframe with the Boscam HD-19 Camera Mount High ...ReadyMadeRC
NEO ALUMINUM 8MM STANDOFF (1 PIECE)
,
Aluminum 8mm Standoff , 3mm threaded through. Red Anodized Fits ...ReadyMadeRC
DJI NAZA-M LITE MAIN CONTROLLER ONLY
| Please note | Naza-M Lite is not compatible with Naza-M V2 PMU or BEC/LED. |
Includes:, 1. Naza-Lite Gyro, All-in-One Design:, For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control., Downloads:, CLICK HERE,
LIMIT 1 PER ORDER PER DAY That's right! Flight Controller ...ReadyMadeRC
M3 NYLON NUT FOR CONTROL BOARDS, ETC 4PCS
,
Perfect for mounting control boards, etc. to your multirotor! White/Natural ...ReadyMadeRC
FLIP FPV FRAME (BLACK)
| Size | Width 14.5" (375mm) Length 11" (280mm) |
| Diagonal Measurement (diagonally motor to motor) | 450mm |
| Motor Mount Measurements | from 15mm up to 28mm |
ReadyMadeRC
HOVERTHINGS FLIP SPORT FPV FRAME (BLACK/ORANGE)
,
Tired of breaking frames? We are too! That's why we ...ReadyMadeRC
FLIP SPORT FRAME (BLACK)
,
385385Tired of breaking frames? We are too! That's why we ...ReadyMadeRC
HONEY BADGER QUAD KIT - BLACK ACRYLIC FPV MOUNT
Black Acrylic camera mount:,
The Honey Badger Quad frame kit - Quad frame (4 ...