HobbyKing
MULTISTAR ELITE 3508-268KV HIGH VOLTAGE ENDURANCE MOTOR
| KV(RPM/V) | 268KV |
| Lipo cells | 4-8 s |
| Max current | 330W |
| Max Amps | 11A |
| No Load Current | 0.13A/10V |
| Internal Resistance | 0.618 ohm |
| Number of Poles | 12/14 |
| Dimensions(Dia.xL) | 35×8 mm |
| Motor Shaft | 4mm |
| prop shaft | 5mm |
| Weight | 96g |
| bolt hole spacing | 19*25 mm |
| Lamination thickness | 0.2 mm |
| Magnets | N45 SH |
| Bearing | EZO Japan |
| Balancing spec | 0.005g |
HobbyKing
FEIYU TECH FY-41AP-M MULTIROTOR FLIGHT CONTROLLER WITH OSD, GPS AND POWER SENSOR
Supported Multi-rotors:, Supported ESC output:, FY-41AP Module Working Voltage, Working Voltage Range:, Measuring current:, Power for FY-41AP module:, Power for Video transmission system :, Assistant Software System Requirement:, :, Max Yaw Angular Velocity:, Max Tilt Angle:, Ascent / Descent:, FY-41AP:, GPS :, Power Manager:,
The FY-41AP Flight controller is an inertial attitude measurement instrument ...HobbyKing
HOBBYKING KK2.0 MULTI-ROTOR LCD FLIGHT CONTROL BOARD
| Gyro | InvenSense Inc. |
| Auto-level | Yes |
| Input Voltage | 4.8-6.0V |
| AVR interface | standard 6 pin. |
| Signal from Receiver | 1520us (5 channels) |
| Signal to ESC | 1520us |
| Firmware Version | 1.2 |
Size:, 50.5mm x 50.5mm x 12mm, Weight:, 21 gram (Inc Piezo buzzer), IC:Atmega324 PA, Accelerometer:, Anologue Devices Inc., Note:, A user manual is available under the files tab.,
Designed by the Grand father of the KK revolution, Rolf ...5 Reviews
HobbyKing
HOBBYKING I86L MULTI-ROTOR CONTROL BOARD (LITE EDITION)
| The Hobbyking i86L Multi-Rotor Control Board supports | Tri copter |
| Input Voltage | 4v to 6v |
| Input signal | 50hz standard PPM |
| PWM Frequency | 400hz for ESC, 50hz for servos |
| Gyro scale | +/- 500dps, ODR |
| Operating temp | -40° C to 85° C |
| Size | 40mm x 40mm |
Specs:, Weight: 8g,
Hobbyking i86L Multi-Rotor Control Board (Lite Edition) features the same ...5 Reviews
HobbyKing
MULTISTAR 350QX BLADE MOTOR SET 4PCS/BOX 2209 1200KV
KV(RPM/V):, Lipo cells:, Max Amps:, Number of Poles:, (12poles 14 stators), Dimensions(Dia.xL):, Motor Shaft:, Propeller attachment:, Weight:, Lower mounting hole spacing:, 4 x 2209 1200Kv MultiStar motor,
Looking for the ultimate power system for your next Multi-rotor ...HobbyKing
NX-4005-650KV BRUSHLESS QUADCOPTER MOTOR
| Turns | 24T |
| Resistance | 0.147Rm |
| Idle Current | 0.6A |
| Can size | 45mm |
| Can Length | 10mm |
| ESC Amps | 20A |
| Rated Watts | 130W |
| Weight | 59g |
| Cell count | 3~4S Lipoly |
Kv:650rpm/v, Shaft:, 3mm (Includes Prop saver mount for GWS style props),
If youre serious about your quad-copters performance, then look no ...5 Reviews
HobbyKing
Y-3 FIBERGLASS TRI-COPTER FRAME (KIT)
| Width | 525mm |
| Length | 550mm |
| Frame weight | 460g |
| Flying weight | 900~950g |
Features:, • Unique full-body fiberglass construction, Specs:, Requires:, 28-XX brushless outrunner motor x 3,
Looking for something new in the multi-rotor world? Well here ...5 Reviews
HobbyKing
HOBBYKING QUADCOPTER FRAME 680MM
| Height | 57mm |
| Width | 680mm |
| Bolt Holes | 12/16/30mm |
Specs:,
The HobbyKing Quadcopter frame is an inexpensive platform for quadcopter ...5 Reviews
HobbyKing
HOBBYKING X550 GLASS FIBER TILT CAMERA MOUNT
| Camera Mount Width | 113mm |
| Camera Mount Height | 85mm |
| Tilt Angle | 90° Pitch |
| Requires | Standard Servo x 1 |
Specs:, Weight:, 153g (with all hardware),
This is the camera mount for the Hobbyking X550 glass ...5 Reviews
HobbyKing
2728 BRUSHLESS OUTRUNNER MOTOR 1000KV
| Dimensions | 27mm x 28mm |
| Weight | 48g |
| Voltage | 7.4v~11.1v (2s~3s) |
| Max Current | 18A |
| Shaft | 3mm |
Specs:, KV:1000 rpm/v,
2728 Brushless Outrunner Motor 1000kv5 Reviews
HobbyKing
AEROSIM RC MULTI-FUNCTION FLIGHT SIMULATOR SYSTEM
| Minimum System Requirements | • Pentium 3 @ 1GHz |
| Included in box | 1 x Software CD |
Features:, • Airplane Training Program with 63 lessons including control operation, take off, landing, taxi, forced landings, and flight patterns., Required:, Your own radio transmitter,
AeroSIM RC is a full function RC flight simulator system ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 4225-390KV 16POLE MULTI-ROTOR OUTRUNNER
| KV(RPM/V) | 390 |
| Max Surge Watts(W) | 330 |
| Working current | 11 amps |
| Max.current(10s) | 15 amps |
| No Load Current | 0.2 amps |
| Intemal Resistance | 0.24 ohm |
| Dimensions(Dia.xL) | 42 x 24.5 mm |
| Shaft | 6 mm |
| Prop | 12 x 3 - 12 x 6 |
| Weight | 86g |
Spec:, Lipo cells:6s, Number of Poles:16,
Looking for the ultimate power system for your next Multi-rotor ...5 Reviews
HobbyKing
TURNIGY 4206 530KV BRUSHLESS MULTI-ROTOR MOTOR
| Can size | 45mm |
| Motor Mount Holes | 16mm / 19mm |
| Rated Watts | 130W |
| Weight | 68g |
| Cell count | 3~4S |
| Motor wire length | 390mm |
Specs:Kv, :530rpm/v, Shaft:, 3.17mm (includes prop adapter for 5mm prop mounting), :25A,
If you're serious about your multi-rotor's performance, look no further ...5 Reviews
HobbyKing
TURNIGY TALON OCTOCOPTER PLATE SET.
| Weight | 81g (Total) |
| Plate Thickness | 1.5mm |
Specification:, Width:, 130mm (From hole to hole), Material:, 100% Pure woven carbon fibre, Includes:, Turnigy Talon Octocopter Upper and lower main frames only., Requires:, Turnigy Talon V2 Quadcopter kit.,
2 x Turnigy Talon V2 Carbon Fiber Boom 221mm (2 ...5 Reviews