HobbyKing
HOBBYKING KK2.1.5 MULTI-ROTOR LCD FLIGHT CONTROL BOARD WITH 6050MPU AND ATMEL 644PA
Size:, Weight:, IC:, Gyro/Acc:., Auto-level:, Input Voltage:, AVR interface:, Signal from Receiver:, Signal to ESC:, Pre-installed firmware.,
The next evolution of the rotor revolution is here!! The ...HobbyKing
QUANUM NOVA FPV GPS WAYPOINT QUADCOPTER W/OUT BATTERY (MODE 2) (READY TO FLY)
Main Rotor Diameter:, Main Rotor Blade Length:, Main Motor Size:, Length:, Weight:, Height:, Flying weight:, Approximate Flight Time:, Battery:, Number of Channels:, Rotor Type:, Completion Level:, Quanum Nova GPS QuadCopter,
Get in the action with the Quanum Nova, the Ready ...HobbyKing
QUANUM 680UC PRO HEXA-COPTER UMBRELLA CARBON (KIT)
| Propeller size | 10~13 inch carbon fiber propeller |
| Motor | 620~980KV 2212~4006 brushless motor |
| Battery specifications | 11.1~14.8V 3000~5000mAh |
| Brushless ESC | 20~30A |
Size motor to motor:, Weight:, without under carriage,, Height from ground to lower rods:, Height from ground to top:, 5ch Radio system (min),
Quanum 680UC Pro Hexa-Copter Umbrella Carbon (Kit) Quanum has just ...HobbyKing
TURNIGY PLUSH 80A W/ UBEC SPEED CONTROLLER
| Cont Current | 80A |
| Burst Current | 90A |
| UBEC Mode | 3A/5v out |
| Voltage Range | 5.6v ~ 26v |
| Weight | 91g |
| Size | 88x31x14mm |
5 Reviews
HobbyKing
TURNIGY INTEGRATED PCB MICRO-QUAD (KIT)
| Width | 250mm |
| Height | 85mm |
Features:, Light weight design., Specs:, Flying Weight:, 145g (not including RX and battery), Required:, 4 x Turnigy T1811-2900kv,
This tiny yet brilliantly designed Micro-Quad features an integrated PCB ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 4822-490KV 22POLE MULTI-ROTOR OUTRUNNER
| KV(RPM/V) | 490 |
| Lipo cells | 4-6s |
| Max Surge Watts(W) | 300 |
| Working current | 12 amps |
| Max.current(10s) | 17 amps |
| No Load Current | 0.45 amp |
| Intemal Resistance | 0.104 ohm |
| Dimensions(Dia.xL) | 47.5 x 25 mm |
| Shaft | 6 mm |
| Prop | 12 x 3 - 14 x 5 |
| Weight | 98 g |
Spec:, Number of Poles:22,
Looking for the ultimate power system for your next Multi-rotor ...5 Reviews
HobbyKing
HOBBYKING X580 GLASS FIBER QUADCOPTER FRAME W/CAMERA MOUNT 585MM
| Weight | 418g (frame only) |
| Width | 585mm |
| Height | 230mm |
| Motor Bolt Holes | 14~25mm |
Specs:, Ground clearance:, 210mm (bottom of frame), 195mm (camera mount rails), Required:, Your own 4 channel transmitter and receiver,
The Hobbyking X580 is a high quality folding-arm quadcopter frame ...5 Reviews
HobbyKing
X-CAM GSM210 2-AXIS CAMERA GIMBAL STABILIZATION SYSTEM
| Input Voltage | 5~6V |
| Dimensions | 45x35x10mm |
Features:, • 2-Axis Stabilization, Specs:, Includes:, X-Cam GSM210 2-Axis Camera Gimbal Stabilization System,
The X-Cam GSM210 is a high quality 2-axis camera gimbal ...1 Reviews
HobbyKing
TAROT IRON MAN T1000 OCTO-COPTER CARBON FIBER FRAME (KIT) TL100B01
Weight:, Tube diameter:, Wheelbase:, Rack diameter:, Total height:, Center cover Specifications:, Motor mounting hole distance:, 8 x 4114/320KV or comparable brushless motors,
The Tarot T1000 Ironman is one huge full precision CNC ...HobbyKing
MULTISTAR 2212 - 920KV SK450 MOTOR SET 4PCS/BOX
KV(RPM/V):, Lipo cells:, Max Amps:, Dimensions(Dia.xL):, Motor Shaft:, Propeller attachment:, Mounting hole spacing:, Suggested props:, Connectors:, 4 x 2212 - 920Kv MultiStar motor,
Looking for a replacement motor set for your SK450 or ...HobbyKing
HOBBYKING 12A BLUESERIES BRUSHLESS SPEED CONTROLLER
| Brake | off |
| Low voltage cutoff threshold | Medium (3.0V/65%) |
| Timing setup | Automatic |
| Soft Acceleration Start Up | Medium |
| Governor mode | OFF |
| Frequency | 8kHz |
| Low voltage cutoff type | Reduce power |
| Cont. Current | 12A |
| Burst Current | 16A/10sec |
| SBEC | 5V/ 1A Output |
| Size | 22*21*4mm |
| Weight | 10g |
Features:, Extremely low internal resistance, Programming features:, Brake setting (we recommend using brake for only folding props applications), Factory default settings:, Battery type Detect:, LiPo with Automatic Cell, Battery:, 2-4 Cell Lipo / 5-12 Cell Ni-XX,
Its no “Mystery” where these ESCs are made, now they ...5 Reviews
HobbyKing
TURNIGY PLUSH 12AMP (2A BEC) BESC
| Cont Current | 12A |
| Burst Current | 15A |
| BEC Mode | Linear |
| BEC | 5v / 2A |
| Lipo Cells | 2-4 |
| NiMH | 5-12 |
| Weight | 13g |
| Size | 32x24x10mm |
5 Reviews
HobbyKing
HOBBYKING 40A BLUESERIES BRUSHLESS SPEED CONTROLLER
| Brake | off |
| Low voltage cutoff threshold | Medium (3.0V/65%) |
| Timing setup | Automatic |
| Soft Acceleration Start Up | Medium |
| Governor mode | OFF |
| Frequency | 8kHz |
| Low voltage cutoff type | Reduce power |
| Cont. Current | 40A |
| Burst Current | 60A |
| SBEC | 5.5V/ 4A Output |
| Size | 52*23*7mm |
| Weight | 30g |
Features:, Extremely low internal resistance, Programming features:, Brake setting (we recommend using brake for only folding props applications), Factory default settings:, Battery type Detect:, LiPo with Automatic Cell, Battery:, 2-6 Cell Lipo / 5-18 Cell Ni-XX,
Its no “Mystery” where these ESCs are made, now they ...5 Reviews
HobbyKing
5030 PROPELLERS (RED) - 3XCW AND 3XCCW - 6PCS PER BAG
,
5030 Propellers (Red) - 3xCW and 3xCCW - 6pcs per ...5 Reviews
HobbyKing
HOBBYKING X525 V3 GLASS FIBER QUADCOPTER FRAME 600MM
| Width | 600mm |
| Motor Bolt Holes | 14~30mm |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X525 V3 quadcopter frame has arrived! The Hobbyking ...5 Reviews