GetFPV
QAV500 "RIB" LANDING GEAR
,
Details This QAV500 landing gear "rib" set is custom produced ...GetFPV
EXPERIMENTAL LONG QAV500 ARMS (SET OF 4)
,
Details These arms were produced on request from a number ...GetFPV
TBS "DISCOVERY" QUADCOPTER WITH CORE
,
Details This is a bundle of the TBS Discovery that ...SDSHobby
MULTIFUNCTIONAL SHOCK-MITIGATING LANDING SKID FOR FPV AERIAL PHOTOGRAPHY FOR DJI F450 / F550 MULTICOPTER
| Height | 200mm |
| Upper Width | 90mm |
| Lower Width | 295mm |
| Net Weight | 310g |
| Recommended | dual axle cameral gimbal for multicopter Mount-A |
Specification:, Features:,
This multifunctional landing skid is designed for DJI F450 / ...SDSHobby
SINGLE-AXIS SHOCK ABSORPTION CAMERA GIMBAL FOR BUMBLEBEE ST550
| Support for pitch and roll two-axis rotation | the pitch angle |
Features:, Total weight:, 100g (include servo), 45, the roll angle:±, Maximum payload:, 110mmx75mm (, Application:, Suitable for Bumblebee ST550 RC quadcopter,
It is made by 1.2mm of carbon fiber board and ...SDSHobby
UPGRADED LIGHT BIAXIAL CAMERAL GIMBAL FOR IFLY-4, IFLY-4S QUADCOPTER/ F
Gopro and pocket camera can be installed; Made in ..." />
Features:,
The Gopro and pocket camera can be installed; Made in ...BevRC
DJI NAZA-M V2
Your purchase includes:, 1* Naza-M v2 controller,
DJI adheres to continuous innovating and improving, with the new ...BevRC
DJI NAZA-M V2 + GPS COMBO
Your purchase included:, 1 * Naza V2 controller,
1* Naza V2 GPS with stand 1* PMU V2 1* ...SDSHobby
UPGRADED SINGLE-AXLE STABILIZED CAMERAL GIMBAL (WITH 1PCS SERVO) FOR IFLY-4, IFLY-4S MULTICOPTER
Features:,
Only can be used for IFLY4, IFLY4S Quadcopters High intensity ...SDSHobby
2.4G IDEAL FLY APOLLO FPV QUADCOPTER RTF (RED COLOR) WITH 1080P CAMERA, GPS, LEFT HAND THROTTLE
| http | //bbs.5imx.com/bbs/forum.php?mod=viewthread&tid=778800&extra=&page=1 |
Parameters for Quadcopter:, Power Consumption (Flight Control Board):, 3.12W, Flight Weight:, <1200g, Hovering Precision (GPS Mode):, ±, Max. Speed of Tail Servo Horn:, 300 degree/sec, MAX. Tilt Angle:, 45 Degree, Max. Vertical Speed:, ±, Max. Flying Speed:, 5m/s, Axle Base:, 350mm, Working Temperature:, -10 to -50 Celsius Degree, Parameter for Radio Control:, , Frequency:, , Channel for Receiver:, , Control Distance:, 300 meters (outside or without obstruct), Receiving Sensitivity (1%PER):, >-93dBm, Transmitter Power:, <20dBm, Working Capacity:, 52Ma@6V, Battery:, 4pcs*AA, Parameter for Charger:, , Input Voltage:, 100-240V, Charging Current:, 1A/2A, Balance Current:, 00Ma, Power:, , Package Lists:, Features:, Pre-installation position makes the Gimbal conveniently mount on the bottom and also easily adjust the motions: moving up and down, rolling left and right, Flight Video:, Kindly Remark:, We provide the following colors and equipments for users; please carefully confirm the item No. and colors when you decide to purchase., IFLY-APRL:, , IFLY-APRR:, , IFLY-APBL:, , IFLY-APBR:, , IFLY-APWL:, White Color, IFLY-APWR:, White Color,
0.8m (Vertical), ±.5m (Horizontal) 4m/s .4GHz ISM 6CH 0W 1*Apollo ...SDSHobby
2.4G IDEAL FLY APOLLO FPV QUADCOPTER RTF (WITHOUT CAMERA), GPS
| Power Consumption (Flight Control Board) | 3.12W |
| Flight Weight | <1200g |
| Hovering Precision (GPS Mode) | ±0.8m (Vertical), ±2.5m (Horizontal) |
| Max. Speed of Tail Servo Horn | 300 degree/sec |
| MAX. Tilt Angle | 45 Degree |
| Max. Vertical Speed | ±4m/s |
| Max. Flying Speed | 5m/s |
| Axle Base | 350mm |
| Working Temperature | -10 to -50 Celsius Degree |
| Frequency | 2.4GHz ISM |
| Channel for Receiver | 6CH |
| Control Distance | 300 meters (outside or without obstruct) |
| Receiving Sensitivity (1%PER) | >-93dBm |
| Transmitter Power | <20dBm |
| Working Capacity | 52Ma@6V |
| Input Voltage | 100-240V |
| Charging Current | 1A/2A |
| Balance Current | 200Ma |
| Power | 20W |
| http | //bbs.5imx.com/bbs/forum.php?mod=viewthread&tid=778800&extra=&page=1 |
Parameters for Quadcopter:, Parameter for Radio Control:, Parameter for Charger:, Package Lists:, 1*Apollo Quadcopter RTF, Features:, Engineering plastic and titanium alloy filled in the case, Pre-installation position makes the Gimbal conveniently mount on the bottom and also easily adjust the motions: moving up and down, rolling left and right, Flight Video:,
Without battery 1*6CH Transmitter & Receiver 1* Landing Skid (one ...HobbyWireless
DJI NAZA-M MULTIROTOR AUTOPILOT V2 W/GPS
| What’s new with the NAZAM V2 | Hardware |
| What’s new with the NAZAM V2 | Firmware and functions |
| Motor Disarm | There are two modes of Motor Disarm |
| VU Input | 7.4V ~ 26.0 V |
| Output(V-SEN port red wire) | 3A@5V |
| (burst current | 7.5A) |
| MAX | 3.15W(0.25A@12.6V) |
| Normal | 1.638W(0.13A@12.6V) |
| Vertical | ±0.8m |
| Horizontal | ±2.5m |
| PMU | 28g |
| GPS | 27g |
| LED | 13g |
| PMU | 39.5mm x 27.5mm x 10.0mm |
| LED | 25mm x 25mm x 7.0mm |
| Notice | Flight Performance can be effected by mechanical performance and payloads |
Details:, , Features:, , It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
PMU V2 - New case design with CANBUS port. Enhanced ...SDSHobby
BRUSHLESS GIMBAL SET FOR FPV/ GOPRO3 HERO3/ DJI
GOPRO HERO3. This ..." />
Product Description:, Weight of Gimbal Set:, 10g, Weight of Gimbal Set and GOPRO3 camera:, 87g, Kindly Remark:, 1. This, Package Contents:, *Attention:,
This gimbal set is special designed for GOPRO HERO3. This ...SDSHobby
2.4G IDEAL FLY APOLLO FPV QUADCOPTER RTF WITH 1280P CAMERA, GPS
| Power Consumption (Flight Control Board) | 3.12W |
| Flight Weight | <1200g |
| Hovering Precision (GPS Mode) | ±0.8m (Vertical), ±2.5m (Horizontal) |
| Max. Speed of Tail Servo Horn | 300 degree/sec |
| MAX. Tilt Angle | 45 Degree |
| Max. Vertical Speed | ±4m/s |
| Max. Flying Speed | 5m/s |
| Axle Base | 350mm |
| Working Temperature | -10 to -50 Celsius Degree |
| Frequency | 2.4GHz ISM |
| Channel for Receiver | 6CH |
| Control Distance | 300 meters (outside or without obstruct) |
| Receiving Sensitivity (1%PER) | >-93dBm |
| Transmitter Power | <20dBm |
| Working Capacity | 52mA@6V |
| Camera Size | 1.2mm (length)* 1.2mm (width)* 9mm (Height) |
| Definition | 600TV lines |
| Image Resolution | 1280*960 |
| Supply Voltage | 3.7V-5V/90 mA |
| Min illumination | 0.5 Lux |
| TV System | PAL |
| Photosensitive Element | 1/4in HD Sensor |
| Brush Frequency | 50f/s PAL |
| Image Color | Multicolor |
| Operating Frequency | 5.8GHz |
| Channels | 4 Channels |
| Communication Distance | 150m (outdoor, no resistance) |
| Input Voltage | 100-240V |
| Charging Current | 1A/2A |
| Balance Current | 200mA |
| Power | 20W |
| 1*3S/11.1V/2200mAh Lipo Battery (flying time | 10min) |
| http | //bbs.5imx.com/bbs/forum.php?mod=viewthread&tid=778800&extra=&page=1 |
Parameters for Quadcopter:, Parameter for Radio Control:, Parameter for Camera:, Parameter for Image Transmission:, Operating Voltage: 5V, Parameter for Charger:, Package Lists:, 1*Apollo Quadcopter RTF, Features:, Engineering plastic and titanium alloy filled in the case, Pre-installation position makes the Gimbal conveniently mount on the bottom and also easily adjust the motions: moving up and down, rolling left and right, Flight Video:,
Without battery 1*6CH Transmitter & Receiver 1* Landing Skid (one ...HobbyKing
WALKERA QR X350 GPS QUADCOPTER WITH RETURN TO HOME FUNCTION AND DEVO 7 (MODE 1) (RTF)
| Main Rotor Diameter | 556mm |
| Main Rotor Blade Length | 206mm |
| Main Motor Size | WK-WS-28-008A |
| Length | 289mm |
| Width | 289mm |
| Height | 180mm |
| Flying Weight | <1000g |
| Approximate Flight Time | 10-15 minutes |
| Number of Channels | 5 channel up |
| Rotor Type | Quad-Copter |
| Experience Level | Intermediate |
| Completion Level | RTF |
| Recommended Environment | Indoor & Outdoor |
*Note:, This is the new version with the USB port on the flight controller for future updatability, a separate Walkera USB adapter (UP02) will be required for connection to your PC., Features:, • Completely Ready to Fly, Specs:, Battery:, 11.1V 2200mAh 25C LiPo, Includes:, Walkera QR X350 Ready to Fly Quad-Copter, Required:, 8 x AA batteries for transmitter, *Note:, The QR X350 uses 3.5mm bullet connectors for the battery plug, please see the accessories tab below for the battery adapter to XT-60. This allows you to use our Turnigy batteries with the QR X350., *MAP pricing notice for EU customers:, MAP pricing for EU customers is €399.98. This price will be applied automatically during the checkout process for all EU customers.,
The Walkera QR X350 Quad-Copter is the new "People's Multi-Rotor", ...5 Reviews