BevRC
PHANTOM 2 WITH H32D GIMBAL READY TO FLY COMBO
| Notes | GoPro Not Included |
Combo Included :, 1. Phantom 2 x 1, Phantom 2 Specifications:,
2. H32D Gimbal x 1 Easy upgrade to FPV AV ...SDSHobby
HML650 RETRACTABLE LANDING GEAR FOR HMF S550 TAROT 650/680PRO FRAME/QUADCOPTER/ HEXACOPTER/MULTICOPTER PHOTOGRAPHY
| Power support | 6s battery |
Features:, Recommended Quadcopter and Hexacopter frame:, wheelbase is between 450mm-700mm and flying weight is less than 4KG, Introduction:, The retractable landing gear is designed for the Multicopter Frame in order to provide a better perspective in aerial-filming/photography work. By using a 2-position switch channel of the R/C transmitter, you can control the landing gear to retract remotely. The retractable landing gear will not block the view of the camera lens, making smooth shooting in all directions possible. It is essential goods for triaxial aerial-filming gimbal such as Gopro 3 gimbal., Tips:, If the switch channel on the TX has fail-safe function, set the fail-safe value to [Lower] position, so that the landing gear will be in [Lower] status when the receiver enters fail-safe, to land the aircraft safely.,
Very easy to install, just two minutes. The whole weight ...HobbyKing
DEAD CAT CONVERSION KIT FOR SK450 QUADCOPTER FRAME
| Front arm width | 490mm |
| Rear arm width | 375mm |
| Weight | 460g |
*Note:, This is a conversion kit only and requires the use of original SK450 frame parts to complete., Specs:, Includes:, Lower main frame plate,
Are you looking to convert your SK450 quadcopter into a ...5 Reviews
BevRC
X650-V4 CARBON FRAME
| https | //docs.google.com/file/d/0B-tvdicmZ-JDZ1ZYQzdBaUhrbjg/edit?pli=1 |
| Empty frame weight | 500g(frame only, no motors,no esc and no battery) |
| Payload capacity | 700-800g |
| Hover time | 10-20 mins depends on your setup |
| Recommand motors | 2216 KV880/2810Q KV760 |
| ESC | 10-30A |
| Props | 1038/1260 |
Check the manual here:, Spec:,
. This is a really nice frame for nearly all ...BevRC
FPV QUAD MF450
Download the manual here:, , The upper base board: reserve the holes to fix naza, WKM or YS-X6(YS-X4) gps stand, there is an ALU-made camera mount for FPV camera in front , 38*38mm or 33*33mm, you can mount a 3s 5000mAh in center, there is place for video Tx in the back side., The lower base board: You can set up 1-4 control borads for quad(FF, KK, MWC etc), also with power dispatch board, extension board etc, also reserve the holes for holding the ultrasonic sensors, place to mount Naza or YS-X4. You can put a 2200mah in this board, reserve holds to add high landing gears, easy to add., Support 12-inch props at most, your purchase includes:, 1* upper and lower base board,
Design specially for FPV use, clear view camera mount, 2-axis ...HobbyWireless
DJI - PHANTOM RTF W/TX AND CHARGER
| Vertical | ± 0.8m. Horizontal |
Details:, ,
The Phantom is DJI’s first small size Ready-to-Fly VTOL. It ...HobbyKing
HOBBYKING X580 GLASS FIBER QUADCOPTER FRAME W/CAMERA MOUNT 585MM
| Weight | 418g (frame only) |
| Width | 585mm |
| Height | 230mm |
| Motor Bolt Holes | 14~25mm |
Specs:, Ground clearance:, 210mm (bottom of frame), 195mm (camera mount rails), Required:, Your own 4 channel transmitter and receiver,
The Hobbyking X580 is a high quality folding-arm quadcopter frame ...5 Reviews
HiModel
FLYCAT 4-AXIAL DIY FRAME W/ 2 GIMBALS (CAMERA MOUNTS) V2 - HIGH LANDING SKID
| Motor spacing(distance between motor axles, cross side) | 480mm |
| Mode | 4-axial |
| Brushless motor | HL 4225-610. |
| Battery | 3000-4000mAh 4S |
| Suggested prop | 10x4.5 3-blade |
, , , , , , Specifications:, , , , , , , , , , , FLYCAT 4-axial DIY Frame W/ 2 Gimbals (Camera Mounts) V2 - High Landing Skid, * Electronics and propellers are not included, to be purchased separately., --------------------------------------------------------------------------------------------, Suggested setting (not included):, , ,
Features: This DIY frame can adopt most popular flight control ...BevRC
DJI PHANTOM RTF W/TX AND CHARGER
GOPRO CAMERA, MUST BE PURCHASED ..." />
| Vertical | ± 0.8m. Horizontal |
GetFPV
TEAM BLACKSHEEP "DISCOVERY" QUADCOPTER
,
Details The TBS DISCOVERY quadcopter is a durable and crash ...GetFPV
"DISCOVERY" QUADCOPTER WITH CORE AND 69 CAMERA
,
Details This is a bundle of the TBS Discovery that ...GetFPV
"DISCOVERY" QUADCOPTER WITH CORE AND 69 CAMERA
,
Details This is a bundle of the TBS Discovery that ...GetFPV
TEAM BLACKSHEEP "DISCOVERY" QUADCOPTER
,
Details The TBS DISCOVERY quadcopter is a durable and crash ...GetFPV
REPLACEMENT EXPERIMENTAL LONG QAV500 ARM
,
Details This listing is for one (1) arm only, the ...GetFPV
QAV400 FPV QUADCOPTER FRAME (PRE-ORDER)
| Weight | 375g (without landing gear) |
| AUW | 1165g with 2200mah 4s nanotech lipo, gopro3, flight cam, TX, and CC3D board |
| Flight Time | 9 minutes hover with 2200mah 4s nanotech |
| Body | G10 |
| Booms | Anodized machined Aluminum |
| Suggested Props | Graupner 8" E-Props |
| Motor Choice | Tiger Motor |
Power: Like the QAV500, the QAV400 comes with a power distribution board to solder the ESCs to as well as FPV electronics to, Suggested Lipo: 4s 2200mah up to 3300mah. HobbyKing NanoTech Lipos in these sizes fit the frame well in terms of dimensions. Max Lipo Dimensions: W: 54mm, H: 35mm, L: 150mm, Suggested ESC:, Tiger Motor 18amp ESC,
Details The new QAV400 FPV Quadcopter is nimble acrobat that ...