RCModelScout.

RCTimer

RC HOBBIES ESC 125A BRUSHLESS MOTOR SPEED CONTROLLER

BEC: No, Important Note: this ESC is Opto, without BEC supplying power to your Receiver, you need extra power source for your receiver. You can use a UBEC, a voltage regulator, or extra batteries as the power source for your receiver. If you hear the music tone repeat again and again for more than 3 times, you may need to check your power source to the receiver.,

RCTimer

RC HOBBIES ESC 100A BRUSHLESS MOTOR SPEED CONTROLLER

BEC: No, Important Note: this ESC is Opto, without BEC supplying power to your Receiver, you need extra power source for your receiver. You can use a UBEC, a voltage regulator, or extra batteries as the power source for your receiver. If you hear the music tone repeat again and again for more than 3 times, you may need to check your power source to the receiver.,

RCTimer

RC HOBBIES ESC 60A BRUSHLESS MOTOR SPEED CONTROLLER

Important Note: this ESC is Opto, without BEC supplying power to your Receiver, you need extra power source for your receiver. You can use a UBEC, a voltage regulator, or extra batteries as the power source for your receiver. If you hear the music tone repeat again and again for more than 3 times, you may need to check your power source to the receiver.,

RCTimer

RCTIMER ESC 30A BRUSHLESS MOTOR SPEED CONTROLLER

Programmable Items:, 1. Brake Setting：Enabled / Disabled, default is Disabled, 1) For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., 2) For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells NiMH battery, fully charged voltage is 1.44*6=8.64V, when “Medium” cut-off threshold is set, the cut-off voltage will be:8.64*50%=4.3V。,

RCTimer

RCTIMER ESC 20A BRUSHLESS MOTOR SPEED CONTROLLER

Programmable Items:, 1. Brake Setting：Enabled / Disabled, default is Disabled, 3. Low Voltage Protection Mode(Cut-Off Mode)： Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off.                                                        Input voltage:DC 6-16.8V(2-4S Lixx), Programmable Items:, 1. Brake Setting：Enabled / Disabled, default is Disabled, 1) For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., 2) For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells NiMH battery, fully charged voltage is 1.44*6=8.64V, when “Medium” cut-off threshold is set, the cut-off voltage will be:8.64*50%=4.3V。,

RCTimer

RCTIMER ESC 10A BRUSHLESS MOTOR SPEED CONTROLLER

Programmable Items:, 1. Brake Setting：Enabled / Disabled, default is Disabled, 1) For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., 2) For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells NiMH battery, fully charged voltage is 1.44*6=8.64V, when “Medium” cut-off threshold is set, the cut-off voltage will be:8.64*50%=4.3V。,

RCTimer

HOBBYWING LED PROGRAM CARD FOR RC BOAT BRUSHLESS ESC (VERSION2)

Score : 8, 1.3 Input Voltage:  4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program card)    2  Programmable Items  , C)  The programmable items of LED_PC2C  (Available for XERUN and EZRUN series car ESC of Version2)   #1    Running Mode #2    Drag Brake Force #3    Low Voltage Cut-Off Threshold #4    Start Mode #5    Maximum Brake Force #6    Maximum Reverse Force #7    Initial Brake Force #8    Throttle Neutral Range #9    Timing #10  Over-Heat Protection #11    Motor Rotation #12    Lipo Cells (Note: The item #11 and #12 are not available for XERUN series ESC of Version 2, they only available for EZRUN series ESC)   ,          Front Panel Picture of LED_PC2C:,

RCTimer

HOBBYWING PROGRAM CARD FOR AIRCRAFT & HELI ESC

Size:, 92mm (L) * 52mm (W) * 6mm (H)., Input Voltage:, 4.8-6V (If the ESC has not a built-in BEC, you must use an additional battery pack to supply the program card),

RCTimer

HOBBYWING LED PROGRAM CARD FOR RC CAR BRUSHLESS ESC (VERSION2)

1.3 Input Voltage:  4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program card)    2  Programmable Items  , C)  The programmable items of LED_PC2C  (Available for XERUN and EZRUN series car ESC of Version2)   #1    Running Mode #2    Drag Brake Force #3    Low Voltage Cut-Off Threshold #4    Start Mode #5    Maximum Brake Force #6    Maximum Reverse Force #7    Initial Brake Force #8    Throttle Neutral Range #9    Timing #10  Over-Heat Protection #11    Motor Rotation #12    Lipo Cells (Note: The item #11 and #12 are not available for XERUN series ESC of Version 2, they only available for EZRUN series ESC)   ,          Front Panel Picture of LED_PC2C:,

RCTimer

SK-20A SIMONK FIRMWARE MULTICOPTER SPEED CONTROLLER ESC 20A

RCTimer

SK-30A SIMONK FIRMWARE MULTICOPTER SPEED CONTROLLER ESC 30A

The Newest SimonK Firmware:, rctimer_tgy_2012-12-14,

RCTimer

SK-40A SIMONK FIRMWARE MULTICOPTER SPEED CONTROLLER ESC 40A

The Newest SimonK Firmware:, rctimer_tgy_2012-12-14,

RCTimer

HVSK-40A MULTICOPTER BRUSHLESS ESC 40A (OPTO)

Features:, 1. Drive tube and high-power Mos, and Mos tube plus a separate heat sink, extreme low output resistance of the PCB(printed circuit board), super current endurance., 3. Safety electrical function: when the power is turned on, regardless of the throttle stick in any position does not start themotor immediately, to avoid personal injury., Product Function Illustrate:, The ESC of multi-copter brushless motor is special design for multi-copter aircraft, Throttle curve freely set and remove the brake function. To let player get a good throttle linearity. Wide voltage range can be configured to be compatible with a variety of brushless motor market.,

RCTimer

RCT ESC 3A BRUSHLESS MOTOR SPEED CONTROLLER

Features :::ListPrice : $ 14.99, Score : 6, Write a Review,

RCTimer

RC HOBBIES ESC 120A BRUSHLESS MOTOR SPEED CONTROLLER

BEC: No, Important Note:, this ESC is Opto, without BEC supplying power to your Receiver, you need extra power source for your receiver. You can use a UBEC, a voltage regulator, or extra batteries as the power source for your receiver. If you hear the music tone repeat again and again for more than 3 times, you may need to check your power source to the receiver.,