Position 1 | stock height up to a 6" prop. |
Position 2 | (+) 0.41" for up to a 7" prop. |
Position 3 | (+) 1.0" for up to an 8" prop. |
Total Weight | 20g |
Three step installation:, , Included:, 1 - Motor Base Tube and Motor Plate, 4 motor screws and 4 mount screws., Notes:, A 35mm outrunner motor will only fit in Position 3 (+ 1.0"). 28mm outrunners will work in any of the three positions. The stock thrust angles are retained in all 3 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Compatible Motors:, , Acceptable bolt patterns (units in mm):, 16x16, 16x19, 19x19, 19x25, 25x25,