Hobby-Lobby
DIGITAL HI-VOLT, HI-TORQUE HS-5685MH: UNIVERSAL SERVO
| Digital Hi-Volt, Hi-Torque HS-5685MH | Universal Servo |
| Digital Hi-Volt, Hi-Torque HS-5685MH | Universal Highlights |
| Digital Hi-Volt, Hi-Torque HS-5685MH | Universal Specs |
| Type | Digital |
| Length | 1.6 in (40.6mm) |
| Width | 0.8 in (19.8mm) |
| Height | 1.5 in (37.8mm) |
| Weight | 2.1 oz (60g) |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | 3-pole ferrite |
| Connector Type | Universal |
| Gear Type | Metal |
| Voltage | 6.0V - 7.4V |
Programmable Features Include: Dead Band Width, Direction of Rotation, Speed of Rotation (slower), End Points, Neutral Points, Fail Safe On/Off, Fail Safe Point, Programmable Digital Circuit, Technical Specifications:, Application:, 1/10 to 1/8 scale vehicles, large sport helis, up to 25% scale aerobatic aircraft, Torque:, 157 oz-in (11.3kg-cm) @ 6.0V; 179 oz-in (12.9kg-cm) @ 7.4V, Speed:, 0.20 sec/60° @ 6.0V; 0.17 sec/60° @ 7.4V,
The HS-5685MH High Torque HV Metal Gear servo was designed ...Hobby-Lobby
JR DS8411 DIGITAL ULTRA TORQUE MG SERVO
| Size Category | Standard |
| Type | Digital |
| Torque | 155 oz/in @ 4.8V, 188 oz/in @ 6V |
| Speed | .18 sec/60° @ 4.8V,.15 sec/60° @ 6V |
| Dimensions (WxLxH) | 0.75" x 1.54" x 1.36" |
| Weight | 2.03 oz |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | Coreless Hi Torque |
| Gear Type | Metal |
| Application | 1.20 Size to 40% Giant Scale Airplanes |
JR DS8411 Servo Features:, For airplane use only., Specs:,
155 oz./in. of unbridled brute strength! With 155 oz./in. of ...HobbyKing
DIGITAL METAL GEAR SERVO 49G/7.2KG/.14SEC
| Model | HD-7150MG |
| Voltage | 4.5v~6v |
| Speed | .14sec |
| Torque | 7.2kg/cm |
| Bearings | 2BB |
| Gears | Metal |
| Weight | 49g |
| Size | 40.7x20x39.4mm |
5 Reviews
HobbyKing
CORONA 929MG METAL GEAR SERVO 2.2KG/ 12.5G/ 0.10SEC
| Model | CS929MG |
| Operating Voltage | 4.8V / 6.0V |
| Operating Current | 200mA / 240mA |
| Stall Torque | 2.0kg.cm /2.2kg.cm |
| Weight | 12.5g |
| Dead Band | ≤3uSec |
| Ball bearing | MR85 |
| Gear | Metal |
| Connector wire | 215mm |
| Operating Temperature Range | -20J+60J |
Operating Speed:, 0.12sec.60º/ 0.10sec.60º, Size:, 22.5X11.5X24.6mm(0.88"x0.45"x0.96"), Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 2 slider/Direct Drive,
Corona 929MG Metal Gear Servo 2.2kg/ 12.5g/ 0.10sec5 Reviews
HobbyKing
POWER HD FAST DIGITAL METAL GEAR SERVO 56G/11.8KG/.13SEC
| Model | HD-DS120M |
| Voltage | 4.8~6.0v |
| Speed | 0.13~0.11sec |
| Torque | 11.8~12.8kg/cm |
| Weight | 56g |
| Size | 40.7x20.5x39.5mm |
5 Reviews
HobbyKing
BMS-705 LOW PROFILE HIGH TORQUE SERVO 6.0KG / .18SEC / 28G
| Weight | 28g / 0.99oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 6.0kg/cm , 83 oz/in |
| Speed At 4.8V | 0.18 sec / 60° at no load |
5 Reviews
HobbyKing
DIGITAL HIGH TORQUE BEARING SERVO 42G/6.5KG/.14SEC
| Model | HD-5680BB |
| Voltage | 4.5v~6v |
| Speed | .14sec |
| Torque | 6.5kg/cm |
| Bearings | 2BB |
| Gears | Plastic |
| Weight | 42g |
| Size | 40.7x20x39.4mm |
5 Reviews
HobbyKing
BMS-761DD LOW PROFILE DIGITAL SERVO 4.4KG / .13SEC / 26G
| Weight | 26g / 0.92oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 4.4kg/cm , 62 oz/in |
| Speed At 4.8V | 0.13 sec / 60° at no load |
5 Reviews
HobbyKing
BMS-410STD STANDARD SERVO 4.4KG / .22SEC / 42G
| Weight | 42 grams / 1.46oz |
| Dimensions | 40.5 x 20 x 38.5 mm / 1.60 x 0.78 x 1.54 inch |
| Torque At 6V | 4.4kg-cm , 60 oz-in |
| Speed At 6V | 0.22 sec / 60 deg at no load |
5 Reviews
HobbyKing
BMS-373 MICRO SERVO 1.5KG / .13SEC / 9.2G
| Weight | 9.2 grams / 0.34oz |
| Dimensions | 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch |
| Torque At 4.8V | 1.5kg/cm , 22 oz/in |
| Speed At 4.8V | 0.13sec / 60 deg at no load |
5 Reviews
HobbyKing
BMS-308BB MICRO SERVO 1.2KG / .10SEC / 6.2G
| Weight | 6.2g / 0.22oz. |
| Dimensions | 19 x 10 x 23.6 mm |
| Torque At 4.8V | 1.2kg/cm , 17 oz/in |
| Speed At 4.8V | 0.10 sec / 60 deg at no load |
Specifications:,
BMS-308BB Micro Servo 1.2kg / .10sec / 6.2g5 Reviews
HobbyKing
BMS-373BB MICRO SERVO (BALL BEARING) 1.6KG / .12SEC / 9.6G
| Weight | 9.6 grams / 0.38oz |
| Dimensions | 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch |
| Torque At 4.8V | 1.6kg/cm , 22 oz/in |
| Speed At 4.8V | 0.12sec / 60 deg at no load |
5 Reviews
HobbyKing
POWER HD STANDARD SERVO 43G/5.8KG/.16SEC
| Model | HD-6001HB |
| Voltage | 4.8~6.0v |
| Speed | 0.16~0.14sec |
| Torque | 5.8~6.7kg/cm |
| Weight | 43g |
| Size | 40.7x20.5x39.5mm |
5 Reviews
HobbyKing
HXT 9864 DIGITAL METAL GEAR 45G / 10.6KG / .11SEC
| Weight | 45g |
| Dimensions | 40.5 x 20 x 37mm |
| Torque | 10.6kg-cm |
| Speed | .11sec/60deg @ no load |
| Running Current | 610mA |
| Stall current | 1200mA |
| Horn Gear Spline | 25segments (same as Futaba) |
| Connector Wire | 300mm |
| Connector Housing | Universal (JR/Futaba) |
| Bearing | Yes |
| Gear Type | Alloy / Steel |
5 Reviews