RCModelScout.

ReadyMadeRC

SZD-45 OGAR (KIT)

Requires : Brushless Outrunner Motor, 4 Micro Servos, Propeller Adaptor, 4-channel+ radio, 20A+ brushless ESC, 3 cells 11.1V 15C 1800mAh Li-Po battery or larger capacity,  and charger, CA Glue for assembly,

ReadyMadeRC

SKY SURFER PNP BRUSHLESS (1.4M)

*Note: There are people looking at what they are calling "version 1" and "version 2" of this plane.  They really aren't version 1 or 2, but they are just different versions of this plane.  Mine are what people are calling version 1, just as the pictures show.  This is MUCH better for FPV since there is a ton of space inside the fuselage.  The "version 2" planes ruined the usefulness for FPV by putting the servos and control arms inside the fuselage.  The tubes for the control arms add strength to the fuselage in this version.  My store is focused on FPV, so the equipment I carry will be what is best for FPV!, *Not to be distributed or linked to by other companies who like to take other people's work.  You know who you are... :),

ReadyMadeRC

SKY SURFER 1400 KIT

*Note: There are people looking at what they are calling "version 1" and "version 2" of this plane.  They really aren't version 1 or 2, but they are just different versions of this plane.  Mine are what people are calling version 1, just as the pictures show.  This is MUCH better for FPV since there is a ton of space inside the fuselage.  The "version 2" planes ruined the usefulness for FPV by putting the servos and control arms inside the fuselage.  The tubes for the control arms add strength to the fuselage in this version.  My store is focused on FPV, so the equipment I carry will be what is best for FPV!  The manufacturer has been a bit inconsistent with the labels: some planes may arrive with the labels already installed., *Not to be distributed or linked to by other companies who like to take other people's work.  You know who you are... :),

ReadyMadeRC

FUNJET ULTRA KIT

Features:, • Easy to Hand Launch, Easy to Land, Recommended Power System:, FunJet Ultra Power Pack,

ReadyMadeRC

DRAGONOSD+ V2 (MAIN UNIT, NO GPS OR CURRENT SENSOR)

ReadyMadeRC

LAYERLENS GOPRO HERO AND HERO2 LENS PROTECTION

For this reason, FPV Manuals has developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. LayerLens weighs only 11g — about 10% of the weight of the GoPro case. LayerLens is a precision laser cut frame that holds the protective glass lens found in the GoPro's case. LayerLens is pushed onto the GoPro’s built in lens. It sits tightly in place and is secured by an included velcro band. In case of a crash that scratches LayerLens’ glass lens, you can easily swap out the scratched protective lens and replace it with one of the lenses that are readily available by GoPro as part of their “Lens Replacement Kit” (which includes 2 lenses for $14 to $20 USD).,

ReadyMadeRC

FATSHARK BASE SD VGA VIDEO GLASSES

package includes:, , specifications:, , Option 2: If you want to share the power supply with your ground station, the included cable allows for that.  You simply feed the power from the 2.1mm barrel connector that normally powers your video receiver/ground station into the included cable, and then plug the extra power plug included on the cable into your video receiver/ground station so you are powering both devices with the same battery.,

ReadyMadeRC

DJI WOOKONG MULTI (WK-M) MULTIROTOR CNTRL

Introduction:, , Features:, , Operating Temperature: -5°C to +60°C (You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.),

ReadyMadeRC

FY-901 MULTI-ROTOR FLIGHT STABILIZATION CONTROLLER

The FY-901 for multi-rotor copter can be used in the following models:, , :, , The FY-901 has been tested to work well with the following RC system:, , The FY-901Operating Mode for multi-rotor copter supports two flight modes :, , 1: Auto-Stabilization mode., : 3D Control Mode., Gyroscope initialization (re-setting):, , Out of the box, the FY-901 has been fully initialized. However, if the following condition occurs, resetting the gyro is recommended:, , NOTE:,

ReadyMadeRC

FY-DOS INERTIAL ATTITUDE STABILIZER WITH GPS

INCLUDES:, , IMPORTANT: The GPS receiver uses 5V, and therefore the DOS system outputs 5V to power the GPS receiver.  Feiyu GPS receivers made for other models, and most other GPS receivers,  use a lower voltage and will be damaged if you connect them to the DOS., New function:, , The latest firmware for Multi-rotor flight system is V2.0 can realize the following functions:, , For more detail:, FY-DoS for multi-rotors control manual,

ReadyMadeRC

FY-DOS INERTIAL ATTITUDE STABILIZER

Included in this version:, , IMPORTANT: The GPS receiver uses 5V, and therefore the DOS system outputs 5V to power the GPS receiver.  Feiyu GPS receivers made for other models, and most other GPS receivers,  use a lower voltage and will be damaged if you connect them to the DOS., New function:, , The latest firmware for Multi-rotor flight system is V2.0 can realize the following functions:, ●, For more detail:, FY-DoS for multi-rotors control manual,

ReadyMadeRC

LAYERLENS FOR GOPRO HERO3 (V2)

For this reason, FPV Manuals developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. Fully assembled, LayerLens for the GoPro 3 weighs only 7.5g — a small fraction the weight of the full GoPro case. LayerLens has become the standard lens protection product in the fields of RC and FPV where a GoPro is used outside of its standard housing.,

ReadyMadeRC

FINWING PENGUIN ADJUSTABLE MOTOR MOUNT

Installation Instructions:, Take the stock wood mount and draw 2 lines going through the existing mounting holes to form an X.  This is shown in the attached photos., Included:, 1 - Penguin Base Tube and SSS Motor Plate, 4 motor screws, 4 motor plate screws,  4 base tube screws., Notes:, The stock thrust angles are retained in all 4 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Acceptable bolt patterns (units in mm):, 19x19,

ReadyMadeRC

SUPER SKY SURFER 2000 ADJUSTABLE MOTOR MOUNT

Three step installation:, Install base tube into the plastic nacelle and secure in place with the 4 socket head screws (allen wrench included), Included:, 1 - SSS 2000 Base Tube and SSS Motor Plate, 4 motor screws, 4 motor plate screws,  4 base tube socket head screws, 1 allen wrench., Notes:, The stock thrust angles are retained in all 4 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Acceptable bolt patterns (units in mm):, 19x19,

ReadyMadeRC

HITEC H4 DC/DC MULTI-CHARGER 4 PORT MICRO PROCESSOR CHARGER

Input Voltage Range:, DC  12 - 18 Volts DC, Required Input Amperage:, 40 Amps / 500 Watts, Charger Circuit Power:, , Discharge Circuit Power:, 10 watts x 4 or 20 watts x 2 Using Channel Bridge Function, Charge Current Range:, , Discharge Current Range:, 0.1 - 2.0 Amps per Channel or 0.1 - 4A Using Channel Bridge Function, LiPo,LiFe & LiIon Balancing Current Drain:, 200mA per Cell, LiPo,LiFe & LiIon Cell Count:, 1 - 6 Cells, Maximum NiCd/NiMh Cell Count:, 1 - 15 Cells, Lead Acid (Pb) Cells / Voltage:, 2 - 20 Volts, Dimensions (W x D x H):, 8.1" x 6.4" x 2.0", Weight:, 3.2 lbs,