RCModelScout.

ReadyMadeRC

DAMPENING KIT FOR QUADRIXETTE 40/GOLIATH/MANTA - BLACK

With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),

ReadyMadeRC

DAMPENING KIT FOR QUADRIXETTE 30 - WHITE

With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),

ReadyMadeRC

DAMPENING KIT FOR QUADRIXETTE 30 - BLACK

With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),

HobbyWireless

DJI NAZA M LITE AND GPS COMBO SET

Details:, , All-in-One Design:, , Advanced attitude stabilize Algorithm:, , Multiple flight control mode/intelligent switching:, , It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. ., GPS Module Available/Accurate Position hold:, , Intelligent Orientation Control (IOC):, , Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points,the forward direction has nothing to do with nose direction: In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 1)： In home lock flying, the forward direction is the same as the direction from home point to multi-rotor.See the following figures (Mode 2)：, Low voltage protection:, , Motor Arm and Motor Dis-arm:, , There are four ways to start the motors, see the following picture: When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors. Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki., Built-in Gimbal stabilization function:,

ReadyMadeRC

AIR TITAN KIT (HARDWARE INCLUDED) NO ELECTRONICS

Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , ​​Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, , Horizontal stabilizer:,

ReadyMadeRC

AIR TITAN KIT (HARDWARE INCLUDED) WITH MOTOR, ESC, AND SERVOS

Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Sample Battery Setup:, , ​​Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, ,

ReadyMadeRC

DAMPENING KIT FOR QUADRIXETTE 40/GOLIATH/MANTA - CARBON FIBER

With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),

BevRC

FY-40A AUTO STABILIZATION MODE AND 3D MODE

FY-40A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:, Mode 1: FY-40A Deactivated Mode In this mode, the FY-40A stabilization function is turned off. The aircraft is completely under the control of the pilot., Mode 2: Auto Stabilization Mode In this mode, the FY-40A will automatically command the aircraft control surfaces to maintain level flight at all times., Mode 3: 3D Control Mode In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY-40A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness.,

ReadyMadeRC

UMX RADIAN BNF

® technology gives a pilot the feeling of flying a much larger glider especially outdoors because of its renowned ability to smooth out the effects of wind and turbulence. Its distinctively curved wing delivers outstanding lift and impressive glide ratio using 3-channel control simplicity. The lightweight brushed power system requires just a single-cell Li-Po battery to provide excellent launch performance and long flight times. Plus the one-piece wing can be easily removed and stored in the handle-equipped box making your ability to soar through the clouds as convenient as can be. You’ll be in the air in no time thanks to great features like:, , Flaps: No,

HobbyKing

515MM MS COMPOSIT NEXUS 30 3D NIGHT BLADE

HobbyKing

GEEBEE R2 1.20 FIBERGLASS KIT

HobbyKing

550MM MS COMPOSIT 3D NIGHT MAIN BLADES

HobbyKing

MIG-15 FIBERGLASS 90MM EDF JET, 1127MM (ARF)

: Fiberglass, Balsa/ply, : 1127mm, : 88mm, Requires:, 36mm EDF Motor 5mm Shaft,

HobbyKing

DFS HABICHT SCALE GLIDER 2400MM (ARF)

Specs:, Requires:, Your own 4 Channel TX/RX,

HobbyKing

PITTS 12 EPO 1600MM W/BRUSHLESS MOTOR & SERVOS (ARF) (RED/WHITE)

Specs:, Motor:, 5060 390kv Brushless Outrunner, Requires:, Your Own 6 Channel TX/RX,