Hobby-Lobby
T-28 TROJAN PNP (OVERSIZE)
44" wingspan, 36" long, 30 oz. flying weight. You can pilot an electric scale replica of this historical warbird. Equipped with an outrunner brushless motor, ParkZone's T-28 Trojan is a powerful, high performance aircraft. The Trojan is perfect for the experienced pilot who would rather spend his time flying a mighty scale replica than building one. Add a receiver and a 3 cell 1800 mAh lipoly battery and you're ready to fly. The Plug-N-Play version of the T-28 Trojan offers the convenience of a Ready-To-Fly and the versatility of an Almost-Ready-to-Fly - just plug in your receiver and fly! You can fly the T-28 Trojan using any major brand of receiver and transmitter. Simply attach a propeller and plug in a receiver of four channels or more, and it's ready for action. Features: Steerable nose gear and fixed main landing gear allows for smooth takeoffs and landings, 960 Kv outrunner brushless power system, E-Flite 30A brushless speed control, Durable Z-Foam construction, Authentic paint scheme, decals and pilot figure, Ready to fly version also available (PKZ4400)., Technical Specifications:, Length:, 36", Wingspan:, 44", Flying Weight:, 30 oz., Controls:, Aileron, Elevator, Rudder, Throttle,
Durable Z-Foam construction - A blast to fly!Hobby-Lobby
STARMAX CESSNA
| Wingspan | 1600mm (63") |
| Length | 1300mm (51-1/8") |
| ESC | 45A Brushless w/separate BEC 5A |
| Motor | 3648 Brushless Outrunner 600Kv |
| Servos | 9-9g servos, 1-40g servos |
| Retracts | Electronic Main and Tail |
| Prop | 3-Blade |
This is a BIG model with a 63' wingspan, operating flaps, servo operated doors, 5-LED lights, steerable nose wheel with pilot that turns his head with rudder movement. Flies like the real thing, solid and predictable. More aerobatic than its full size counterpart, easily performs rolls, loops and inverted flight that would upset your average passenger. The airplane is large enough to be seen easily and is a joy to fly around the pattern and practice those touch-and-goes. This is a 4-cell airplane and needs a 3200mAh or larger battery. Includes the Brushless Outrunner 3648 (600Kv) motor and a 45A ESC, nine-9 gram servos and one-40 gram servo. The airplane has nice scale details like radio masts, running and landing lights and even operating doors (servo driven off the retract channel). Requires a minimum 6-channel radio. Each airplane has an illustrated build manual. Control surfaces are live hinged but pin hinges are included with the airplane to upgrade the controls. Each hardware pack includes surplus screws and fasteners as spares. Assembly will take only a couple of hours. Controls are: Ailerons, Elevator, Rudder, Flaps, Doors (retract channel), and Throttle., Technical Specifications:, CG: 70-75mm back from LE of Win,
BIG---63" Wingspan Cessna 182 in EPO foamHobby-Lobby
ULTRA MICRO F4U CORSAIR BNF (OVERSIZE)
| Wingspan | 15.9 in (405mm) |
| Overall Length | 12.8 in (326mm) |
| Flying Weight | 1.47oz (41.8g) |
| Servos | AS2000L (included) |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Throttle | Yes |
| Scale | Ultra Micro |
| Steering | Yes |
| Experience Level | Intermediate |
Ultra Micro F4U Corsair BNF Highlights:, Comes with two decal sets from which to choose - WWII's more famous Corsair pilots, Ira "Ike" Kepford of the famed "Jolly Rogers" and Greg "Pappy" Boyington from the "Black Sheep Squadron", Ultra Micro F4U Corsair BNF Specs:, Wing Area:, 48.7 sq in (314 sq cm), Motor Size:, 8.5mm Coreless Brushed motor, Radio:, 4+ Channel DSM2 Transmitter required, Recommended Battery:, 150mAh 1S 3.7V LiPo battery (included), Flaps:No, Retracts:No, Charger:, 3.7V LiPo Charger (included), Is Assembly Required:No, Needed to Complete:, 4+ channel DSM2 compatible transmitter is all you will need.,
ParkZone's first Ultra Micro Series F4U Corsair It was an ...Hobby-Lobby
CHAMP RTF ULTRA-MICRO
| Wingspan | 22.4 in. (517mm) |
| Overall Length | 14.3 in. (365mm) |
| Flying Weight | 1.3 oz. (38g) |
The HobbyZone Champ is also equipped with the Spektrum 2.4GHz DSM2 advantage: The Champ's radio system uses the same Spektrum 2.4GHz DSM2 technology that is trusted by experienced RC pilots all around the world. With DSM2 technology you will enjoy complete freedom from signal interference whenever you fly., Champ RTF Highlights:, Everything you need to Teach Yourself to Fly in one box- even the batteries, Technical Specifications:, Champ RTF Specs:, Radio:, 4-channel 2.4 GHz Rx with Spektrum DSM2 3 channel receiver, CG (center of gravity):, Approximately 28mm from leading edge of the main wing, Prop Size:, 5.1 x 2.8 (130 x 70mm), Recommended Battery:, 3.7V 1S 150mAh LiPo (included), Charger:, DC 3.7V LiPo charger (included), Landing Gear:, Fixed main with steerable tail wheel,
The Champ takes the stress out of teaching yourself to ...Hobby-Lobby
STARMAX CESSNA
| Wingspan | 1600mm (63") |
| Length | 1300mm (51-1/8") |
| ESC | 45A Brushless w/separate BEC 5A |
| Motor | 3648 Brushless Outrunner 600Kv |
| Servos | 9-9g servos, 1-40g servos |
| Retracts | Electronic Main and Tail |
| Prop | 3-Blade |
This is a BIG model with a 63' wingspan, operating flaps, servo operated doors, 5-LED lights, steerable nose wheel with pilot that turns his head with rudder movement. Flies like the real thing, solid and predictable. More aerobatic than its full size counterpart, easily performs rolls, loops and inverted flight that would upset your average passenger. The airplane is large enough to be seen easily and is a joy to fly around the pattern and practice those touch-and-goes. This is a 4-cell airplane and needs a 3200mAh or larger battery. Includes the Brushless Outrunner 3648 (600Kv) motor and a 45A ESC, nine-9 gram servos and one-40 gram servo. The airplane has nice scale details like radio masts, running and landing lights and even operating doors (servo driven off the retract channel). Requires a minimum 6-channel radio. Each airplane has an illustrated build manual. Control surfaces are live hinged but pin hinges are included with the airplane to upgrade the controls. Each hardware pack includes surplus screws and fasteners as spares. Assembly will take only a couple of hours. Controls are: Ailerons, Elevator, Rudder, Flaps, Doors (retract channel), and Throttle., Technical Specifications:, CG: 70-75mm back from LE of Win,
BIG---63" Wingspan Cessna 182 in EPO foamGetFPV
OPENPILOT CC3D FLIGHT CONTROLLER (PRE-ORDER)
| These videos were flown with a QAV400 and CC3D. Pilots | MidwestRob and |
| 3-axis Gyroscope array and 3-axis Accelerometer | MPU-6000 |
| Supports several common RC inputs | 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers |
| ReceiverPort functions (configurable) | 6 PWM input channels or combined PPM stream, 4 PWM output channels |
| MainPort functions (configurable) | serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites |
| FlexiPort (configurable) | serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development) |
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers,
Details PLEASE NOTE!!! If you're in the US and choose ...GetFPV
FM4008 620KV MULTI-ROTOR MOTOR
| Weight (with cables) | 99g |
| Suitable Props | 9, 10, 11, 12 x 4.5, 4.7, 5 |
| Most Efficient Prop Size | 10x4.7 or 10x5 |
| ESC | 18amp or higher |
| Lipo | 3s or 4s |
| Shaft Diameter | 4mm |
| Included Aluminum Locator Ring Diameters | 5mm and 6mm |
| Cable Length | 320mm |
| Cable Gauge | 20AWG |
| Stator | 40mm |
| Diameter | 45mm |
| Mounting Holes | 25mm x 25mm across |
| Suitable Mounting Screw | 6mm M3 button-head or socket screw |
| Flown with the FM-4008 on a QAV500 and 10" Graupner E-Props (Pilot | Juz |
KV: 620kv,
Details The fpvmanuals FM-4008 is a new 620kv multi-rotor motor ...HobbyWireless
DJI - PHANTOM LANDING STRUT EXTENSION SET
| with included stainless steel hardware | 36.2g |
Details:, Add a full inch of height and four inches width to your DJI Phantom landing gear! These pure carbon fiber feet clamp onto your DJI Phantoms stock landing gear. They will widen the stance of the landing gear from six to ten inches. Rubber landing feet protect the carbon fiber and are adaptable to insert landing skids. These legs making landing and takeoff a breeze. Great for novice and advanced pilots alike., Weight:, ,
These feet are configurable for the PhantoMount X2 gimbals, They ...Flying-Hobby
ROTORTECH 600MM CF BLADES (T-REX 600)
| Length | 600mm |
| Width | 55mm |
| Weight | 140gm |
| C.G. | 23% |
| Grip | 12mm |
| Hole | 4mm |
| Airfoil | Symmetrical |
| Tip | Angled |
| Make | Carbon Fiber |
| Common Application | 46-50 Size RC Helicopters |
Specifications:, Includes:, 1x 3D/holographic decal sheet, RotorTech™ Standard Features:, Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.,
4x washers Low parasitic drag coeficient due to the efficient ...Flying-Hobby
IN-FLIGHT VOLTAGE LOGGER & HEALTH ANALYZER
| Working temperature | -20 C-50 C |
| Weight | 10g |
| Size | 53x 29x 5mm |
| MAX *** The maximal voltage. The display of the highest cell voltage of the battery. Picture 2 | MAX U3 |
Introduction:, With 6 months development, improvement and test, the new battery voltage logger and health analyzer has been released to the market. The R1 is not only an accurate 6S battery voltage cell meter, but also integrated with battery health analysis function. So it's really a necessity to the model pilots., Specification:, , Feature:, Small, light and ultra-portable with only 5mm thickness, including LCD screen., Remarks and attentions:, -Due to the battery pack loading drop, to avoid the voltage measurement difference error, make sure the battery pack is disconnected at least 30 seconds., How to Use:, , 1. Normal battery voltage check:, Connect the battery to the R1 after the battery is unloaded for at least 30 seconds. To connect the battery balance plug to the R1, always use the pin 1 on the R1, and make sure the negative pin of the battery balance plug is connected to the R1 pin 1. For example: if a 3S Li-Po pack need to be measured, connect the battery to R1 1~4 pin, and the negative pin on the balance plug is connected to pin 1; If a 5S battery pack, then connect the battery to pin 1~6, and the negative balance plug still to pin 1. Now you can read voltage value on the display., 2. Lowest voltage recording:, The lowest voltage recoding function is designed for the purpose of logging the lowest voltage value when the battery is loaded during the flight, then it's possible for the pilots to understand how their battery works., Activate the function:, [A]. Connect with the battery, after the R1 is initialized, press ¡§A¡¨ button till the ¡§hold¡¨ appears on the bottom-right on the screen, which means the lowest voltage capturing (LVC) mode is enabled., Connect the R1 with battery, and enter health analysis function. Then it indicates the following:, M,
User's manual Voltage value and capacity display. Up to 6 ...Flying-Hobby
ROTORTECH 720MM CARBON BLADES MAIN BLADE
| Length | 720mm |
| Width | 61.5mm |
| Grip | 14mm |
| Hole | 4-5mm |
| Material | Carbon fiber |
| Air-Foil | Symmeterical |
RotorTech™ Standard Features:, Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.,
- Specification - Low parasitic drag coeficient due to the ...Flying-Hobby
ROTORTECH 550MM CARBON BLADES MAIN BLADE
| Length | 550mm |
| Width | 51mm |
| Grip Thickness | 12mm |
| Hole | 3-4mm |
| Airfoil | Symmetrical |
| Tip | Angled |
| Make | Carbon Fiber |
| Common Application | 30 size RC Helicopters |
Specifications:, Includes:, 1x 3D/holographic decal sheet, RotorTech™ Standard Features:, Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.,
2x spacers Low parasitic drag coeficient due to the efficient ...Flying-Hobby
FPV TRANSMITTER TRAY (W/O MONITOR) COMBO
Features of Transmitter Tray:, Specifically designed for FPV pilots, there is enough space to install your video receiver and related equipment., Features of Dual-shoulder Transmitter Neck Strap:, Two fixed points mode for transmitter tray, one fixed point mode for normal RC transmitter.,
Removable wrist rests Optional LCD monitor and hood. Adjustable design ...Flying-Hobby
AR.DRONE PARROT MAINBOARD + VERTICAL CAMERA
Description :, The main board includes the Parrot P6 central CPU of the AR.Drone. The P6 chip has been specially designed for the AR.Drone. It includes a 468 MIPS ARM926EJ Risc CPU and a video accelerator. The main board runs Linux along with AR.Drone software. The main board includes 256 Mb 200 MHz 32 Bits MDDR RAM and 32Mb of NAND Flash. It includes a Wi-Fi chipset from Atheros and an USB Port for direct flashing and future extensions. The Atmel P6MU chip is a power management chipset for the P6 chipset., The Parrot software performs:, - Stabilizing and auto piloting of the AR.Drone.,
The main board includes also the 60 FPS vertical camera. ...ReadyMadeRC
DAMPENING KIT FOR QUADRIXETTE 40/GOLIATH - WHITE
| The big goal for lots of multicopter-pilots | videos free of wobble and shaking! |
| Weight | 30g. |
With the set comes everything you need for the build, including 4 alpha-gel cubes. The housing for the GoPro is NOT included. In the images a copter-frame is shown, this of course is also not included (just the dampening kit) :-),
So we balance the props, buy better motors (and maybe ...