ReadyMadeRC
TIGER MOTOR MN4010-9 - KV 580, 44.3MM X 30.5MM, 277G
| Clearance | This product not available for back-order. |
ReadyMadeRC
BOSCAM GS920 AIO FPV GOGGLES WITH HEAD TRACKER AND 2.4/5.8 RX
| Resolution ratio | VGA 640x480RGB;display pixel |
| Frequency | 8channles 2.4G&5.8GHz (5.8G |
| Antenna connector | RP-SMA |
| Color | sliver |
| Weight | 490 |
Manufacturer Specs:,
BOSCAM GS920 FPV Goggles Angle of view：32° Virtual photo size：3.5m ...ReadyMadeRC
ZEPHYR MINI Z FILM PACKAGE
,
Clear film set from Ritewing for covering the Zephyr Mini ...ReadyMadeRC
RMRC 2100MAH 3S 3C LIFE TRANSMITTER PACK (FUTABA/JR) PICKUP ONLY
| Capacity | 2100mAh |
| Type | 3S1P / 9.9v / 3Cell |
| Constant Discharge | 20C (42A) |
| Peak Discharge (2 sec burst) | 40C (84A) |
| Pack Size | 100 x 30 x 30mm |
| Charge Plug | JST-XH |
| Power Connector | Futaba Male |
| Watt Hours | 23.31 |
Note:, We recommed a charge rating of 1C (2.5A) or less for this pack. Always remove battery from transmitter before charging., Pack Weight:, 5.6 oz (161g) including wires/connector,
THESE BATTERIES ARE NOT AVAILABLE FOR SHIPPING. STORE PICKUP ONLY. ...ReadyMadeRC
DJI NAZA-H BEC MODULE (PMU)
,
BEC (Power Management Unit) used with DJI NAZA H Flight ...ReadyMadeRC
REPLACEMENT BEARINGS - MT2814 AND OTHERS (2PCS)
Replacement T-Motor bearings for the following motors:, 2814, 3506, 4006, 4008, MN4010, MN3110, MN3510, MN3508, MN4010,
ReadyMadeRC
GOPRO - DUAL CAMERA HOUSING GOPRO+CCD HERO1&2 - WHITE
"Snap-In"-Mechanism for a complete protection and a stable mounting:, We are especially proud of this, thats why the housing has been named after it: Due to a front-plate with a "snap"-mechanism, the box is completely sealed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using the 3 countersunk screws and the buttefly nuts included in the Quadrixette 30-frames, the housing can be mounted very flexible, :, "Snap" can be easily installed/uninstalled on the Quadrixette 30/40. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video).,
"Click" is a mounting system for cameras in the FPV-area. ...ReadyMadeRC
PARKFLYER SWITCH-MODE BEC 6V
| Input voltage | 8V to 33.6V (3s-8s lithium, up to 21 NiMHs) |
| Output current | 1.25A continuous, 1.5A 60 second peak (6 4-9g servos, 4 standard servos) |
| Weight | 6.5g/.23oz |
| Weight without wires | 4.4g/.16oz |
Weight:, 6.5g / 0.23oz, Model:, ParkBEC 6V, Specifications:, Applications:, Parkflyers,
(no wires) 4.4g / 0.16oz Product Description The ParkBEC 6V ...ReadyMadeRC
CELL SHIELD - ADVANCED LITHIUM CUTOFF PROTECTION
| Input voltage | 2s to 6s Lithium or Lithium Polymer |
| Cutoff voltage | 2.5V to 3.5V/cell adjustable |
Weight:, 7g / 0.25oz, Model:, CellShield, Specifications:, Applications:, Any plane without an effective lithium cutoff,
Product Description CellShield is a low voltage cutoff device which ...ReadyMadeRC
CASTLE CREATIONS PHOENIX TALON 90 BRUSHLESS ESC W/BEC
| Talon 90 | the ESC with the biggest BEC. |
ReadyMadeRC
TIGER MOTOR - M6 PROP ADAPTER NUT (2 PCS)
,
Tiger Motor - M6 Prop Adapter Nut (2pcs/bag) 2814, MT2820, ...ReadyMadeRC
RMRC GO-PROTECTOR
Designed to accept RMRC Clear and Polarized lens kit. (*Note: Our LINEAR polarized lens actually reduces reflections from flat horizontal surfaces and improves overall picture quality),
A custom 3D printed lens protector for your GoPro HERO3 ...ReadyMadeRC
GOPRO FLOATY BACKDOOR
| Compatibility | HERO4, HERO3+, HERO3, HERO, HD HERO2, Original HD HERO |
| Compatibility | All Cameras |
Included Items:, , Restrictions:, Sales of the GoPro equipment from my store are restricted to the United States only.,
This easy-to-spot flotation keeps your GoPro afloat. This easy-to-spot flotation ...ReadyMadeRC
BOSCAM THUNDERBOLT 5.8G 2000MW AV TRANSMITTER
| Power | 2000mW (33dB +-1dB)* |
| Power On Working | Plug and Play |
| Input Voltage | 7-24V DC, 2-6 cells battery |
| Cooling System | whole body heat sink and cooling |
| Channel Switching | channel button and channel display |
| Antenna | RP-SMA female 50 ohm connector |
| Accessories | one original omni antenna, one multi function 5pin cable |
| Size & Weight | 62mm*42mm*20mm, 37g |
| Package Size & Weight | 135mm*85mm*45mm, 82g |
: Amateur Radio Band, 5865M, 5845M, 5825M, 5805M, 5785M, 5765M, 5745M, 5725M;8CH Not frequency-compatible with FatShark, ImmersionRC, Airwave based equipment, of power (including the ones from the other vendors). We take the time to verify the ratings from the manufacturers. Do the other dealers? :) , Notes:, These use reverse polarity, RP-SMA connectors and may require an adapter with the use of some antennas. Although ImmerseionRC A/V connectors fit, the power/ground will need to be reversed before use., Notice:, The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
5.8G Thunderbolt 2000mW* AV wireless transmitter Transmitter frequency They do ...ReadyMadeRC
XOAR PJN - 10X5 PUSHER (1 PC)
| Applicable Engines Type | Electric Motors |
| Prop Bore Size | 6mm |
Please Note: Final balance check is suggested before flight due to external factors such as temperature, handling during transit may vary the balance of the propeller.,
Xoar PJN is one of the world’s first wooden propeller ...