HobbyKing
HIGH-END AIRBRUSHED CANOPY FOR 450 SIZE HELI
,
A striking and beautiful canopy! If you take pride in ...5 Reviews
HobbyKing
FIBERGLASS CANOPY FOR TREX-600 ELECTRIC
,
Fiberglass Canopy for Trex-600 Electric5 Reviews
HobbyKing
THRUST BEARING 8X16X5MM FOR ALL TYPE HELI (2PCS/SET)
,
Thrust Bearing 8x16x5mm For All type Heli (2pcs/set)HobbyKing
M4.8 STEEL BALL W/ 2X10 SCREW FOR ALL HELIS (10PCS)
,
M4.8 Steel Ball w/ 2x10 screw for all helis (10pcs)5 Reviews
HobbyKing
BLADES HOLDER SPACER 0.5MM FOR ALL HELIS (4PCS/BAG)
,
Blades Holder Spacer 0.5mm for all helis (4pcs/bag)HobbyKing
FLYMENTOR 3D HELICOPTER STABILISATION SYSTEM
| Voltage | 4.8-6.0V |
| Current | 55mA (under 5V) |
| Weight | 37G |
| Temperature | O'C~ +40'C |
| Under the stabilisation mode and positioning mode, maximum rotate speed allowed | J Aileron and Elevator |
| J Tail turning (if using external gyro) | ,;3600 / s |
Features:, Control all movement, including attitude stabilization, speed control, position locking., Specification:,
Flymentor 3D is a stabilization unit that helps the helicopter ...5 Reviews
HobbyKing
HK-500GT (TT) 3D TORQUE-TUBE ELECTRIC HELICOPTER KIT (INCL. GF BLADES AND EXTRAS)
| Length | 840mm |
| Height | 310mm |
| Main rotor diameter | 970mm |
| Tail rotor diameter | 200mm |
| Motor pinion gear | 13T |
| Main drive gear | 162T |
| Tail drive gear | 31T |
| Weight(without power system) | 1370g |
| Flying weight | Approx 1700g |
| Servos | See linked items below. |
| Radio Gear | Gyro/Rx |
| ESC | 80A or greater. |
| Battery | 2 x 2200mAh 3S 20C or greater. |
Specification:, Drive gear ratio:1:12.46:4.68,
The high performance HK-500GT(TT) is 3D flight ready. 99% of ...5 Reviews
HobbyKing
HOBBY KING 401B AVCS DIGITAL HEAD LOCK GYRO
| Operating voltage | 4.8V ~6V( common for receiver) |
| Operating temperature | -lOL r-.rf-45 C |
| Dimensions | 28x26x20 mm |
| Operating current | 80mA |
Functions:, Compatible with both Digital and Analog systems, Specifications:, Digital proportional RIC system, IMPORTANT: Make sure you isolate your Gyro from vibration. Use double sided foam tape and never use cable ties. Vibration will cause harm to the Gyro and degrade performance.,
The now famous HK401B is known to have the same ...5 Reviews
HobbyKing
M3 STEEL LINKAGE BALL FOR ALL HELIS (10PCS)
,
M3 Steel Linkage Ball for all helis (10pcs)5 Reviews
HobbyKing
KNIFE EDGE REAMER 0.5-10MM
,
Knife Edge Reamer 0.5-10mm Use this to cut through car ...5 Reviews
HobbyKing
FUEL TANK GUARD FOR X90 / VIBE 50 - 90 / T-REX600 - 700 1MTR
,
Fuel Tank Guard for X90 / Vibe 50 - 90 ...5 Reviews
HobbyKing
SPARTAN FMA SENSOR CABLE FOR AP-2000I
,
This cables allows you to connect your own FMA sensor ...5 Reviews
HobbyKing
HOBBYKING GA-250 MINI-MEMS GYRO
| Sensor | MEMS |
| Working voltage | DC 3.0 ~9V |
| Working current | 20 mA (@ 5.0v) |
| Working temperature | -5~60C |
| External dimensions | 21 × 21 × 10 mm |
System control:, AVCS (Angular Vector Control System), Dual-Gain Function:, Two modes can be selected via the TX, AVCS mode or Rate mode., Digital Servo support:, 1520us, 760us and 960us., Weight:, 8g (Inc plugs and wire),
The Hobby King MEMS GA-250 is a high-performance tail-lock gyro ...5 Reviews
HobbyKing
TZ-V2 .50 SIZE NITRO 3D HELICOPTER KIT (TORQUE TUBE)
| Length | 1250mm |
| Height | 429mm |
| Width | 231mm |
| Gear ratio | 8.27 |
| Pinion gear | 10T |
| Main gear | 85T |
| Main rotor diameter | 1345~1365mm |
| Tail rotor diameter | 242mm |
| Main rotor length | 600~620mm |
| Flying weight | Approx 3850g |
| Tail Rotor Drive System | Torque Tube |
| Radio Gear | Gyro/Rx |
| Rx Battery | (UBEC with 2 Cell Lipoly) |
Product Spec:, Type:, .50 size glow powered 3D Pro Helicopter, Control System:, 120° or 140° CCPM (140° Optional), Key Features:, Strong yet lightweight G-10 side frames,
The V2 .50 is a Nitro .50 size helicopter that ...5 Reviews