HobbyKing
FRONT/REAR UPPER AND LOWER SUSP.ARMS SET - A2016T
,
Front/Rear Upper and Lower Susp.Arms Set - A2016T5 Reviews
HobbyKing
FRONT SHOCK COMPLETE 2 PCS - 118B, A2006, A2023T AND A2035
,
Front Shock Complete 2 pcs - 118B, A2006, A2023T and ...5 Reviews
HobbyKing
TURNIGY 1:4 SCALE BRUSHLESS GOKART (KIT)
| Length | 450mm |
| Width | (F)262mm / (R)305mm |
| Height | 201mm |
| Ground Clearance | 5~12mm |
| Top Speed | 45~60km/h |
| Tyres | 56×30mm / 58×45mm |
| Pinion | 13T (Required) |
| Driving Weight | 2,100g (approx.) |
| LiPo | 2S 4000~5200mAh Hardcase Lipo (140x48x50mm max size) |
The TURNIGY 1:4 scale gokart is a real blast to drive, with it's low center of gravity and ultra sticky TruRubber* tyres which keep the kart turning sharply. A powerful full size servo is included with kart to keep the steering precise and quick, while the non differential rear tyres lay rubber on each corner!, Gear Ratio:13:2.37, Drive/Main Ratio:13:47, T-Tube/Main Ratio:20:30, TruRubber:, TURNIGY's very own super-soft rubber compound that sticks to road surfaces better than standard street tyres.,
The entire floor pan is made of 4mm Carbon fiber ...5 Reviews
HobbyKing
RED ALUMINUM MOTOR HEAT SINK W/ADJUSTABLE FAN (SIDE) 36MM INRUNNER
,
Red Aluminum Motor Heat Sink w/adjustable fan (side) for 36mm ...5 Reviews
HobbyKing
XK4082-1500KV BRUSHLESS INRUNNER
| Max Amps | 120A |
| Max Volt | 22.2V |
| Max Watts | 2660 |
| Rpm/V | 1500kv |
| Resistance | 0.0107 ohms |
| No-load Current | 6.3A |
| Dimension | 40mm x 82mm |
| Mounting hole depth | 5.5mm |
| Length of extend Shaft | 16mm |
| Shaft diameter | 5mm |
| Weight | 446g |
# of poles:4,
XK4082-1500KV Brushless Inrunner Specs.5 Reviews
HobbyKing
HOBBYKING R2 SPEEDOMETER FOR RC CAR
| Working temperature | -20°C to 50°C |
| Dimensions | 33x11x69mm |
Features:, -Measures and records present car speed, max car speed, and average car speed, Weight:, 21g (without connection wire), Input voltage range:, 3~24V (7.4V recommended),
The Hobbyking R2 Speedometer is a car speed recorder designed ...3 Reviews
HobbyKing
METAL OUTDRIVE CUP (2PCS/BAG) - A2030 AND A2031
,
Metal Outdrive Cup (2pcs/bag) - A2030 and A20315 Reviews
HobbyKing
SPRING - TURNIGY TR-V7 1/16 BRUSHLESS DRIFT CAR W/CARBON CHASSIS(4PCS)
,
Spring - Turnigy TR-V7 1/16 Brushless Drift Car w/Carbon Chassis(4pcs)HobbyKing
BATTERY HOLDER - TURNIGY TR-V7 1/16 BRUSHLESS DRIFT CAR W/CARBON CHASSIS
,
Battery Holder - Turnigy TR-V7 1/16 Brushless Drift Car w/Carbon ...HobbyKing
HIGH QUALITY ALUMINUM SHOCKS (2PCS/BAG) - A2016T
,
This is a high quality aluminum shock set for the ...5 Reviews
HobbyKing
TURNIGY BALL END DRIVER FOR 1/8~1/10 MODEL CARS
,
Turnigy Ball End Driver for 1/8~1/10 Model Cars Lightweight, hollow ...5 Reviews
HobbyKing
TURNIGY MACH2 13.5T BRUSHLESS R/C CAR MOTOR W/TIMING ADJUST 3500KV
| Weight | 204g |
| Diameter of shaft | 3.17mm |
| Length of front shaft | 15mm |
| Power | 205W+ |
Specifications:, Dimension:, 53mm x 36mm(43mm w/Batt-terminal) , 70mm(with shaft), Kv:3500rpm/v, Cells:, 4-7NiMh / 2-3S Lipoly,
Turnigy Mach2 Brushless R/C Car Motor w/timing adjust. This brushless ...5 Reviews
HobbyKing
17T/5MM 32 PITCH STEEL PINION GEAR
,
17T/5mm 32 Pitch Steel Pinion Gear5 Reviews
HobbyKing
KD36-60-06L 4000KV BRUSHLESS INRUNNER (11T)
| Dimensions | 36~60mm |
| Shaft size | 5mm |
| Weight | 260g |
| Idle Current | 5.9A |
| Resistance | .0044 |
| Max Amp | 100A |
Kv: 4000rpm/V (11T),
The KD36 inrunners are equivilent to 540 size motors. Front ...5 Reviews