HobbyKing
TURNIGY 1:4 SCALE BRUSHLESS GOKART ARR.
| Length | 450mm |
| Width | (F)262mm / (R)305mm |
| Height | 201mm |
| Ground Clearance | 5~12mm |
| Top Speed | 45~60km/h |
| Tyres | 56×30mm / 58×45mm |
| Pinion | 13T |
| Driving Weight | 2,100g (approx.) |
| LiPo | 2S 4000~5200mAh Hardcase Lipo (140x48x50mm max size) |
The TURNIGY 1:4 scale gokart is a real blast to drive, with it's low center of gravity and ultra sticky TruRubber* tyres which keep the kart turning sharply. A powerful full size servo is included with kart to keep the steering precise and quick, while the non differential rear tyres lay rubber on each corner!, Gear Ratio: 13:2.37, Drive/Main Ratio: 13:47, T-Tube/Main Ratio: 20:30, TruRubber: TURNIGY's very own super-soft rubber compound that sticks to road surfaces better than standard street tyres.,
The entire floor pan is made of 4mm Carbon fiber ...5 Reviews
HobbyKing
HK-3000 3CH 2.4GHZ FHSS RX SUIT THE HK310 TRANSMITTER
| Antenna Length | 180mm |
Specs:, Weight:9g, : 40mm x 27mm x 13mm,
HK-3000 3ch 2.4ghz FHSS RX suit the HK310 Transmitter Dimensions5 Reviews
HobbyKing
TURNIGY TRACKSTAR 4168 2650KV 1/8TH BRUSHLESS MOTOR
| Size | 41x68 |
| Max Amps | 129A |
| Max Volts | 17v |
| Max Watts | 2200w |
| Idle Current | 4.5A |
| Resistance (Ri) | 6.2 |
| Shaft size | 5mm |
Specs:, Kv:2650, Poles:6,
Forget those messy nitro engines and upgrade your 1/8th truck ...5 Reviews
HobbyKing
PLASTIC FRONT HUB CARRIER BAJA 260 AND 260S (1PC)
,
Plastic Front Hub Carrier Baja 260 and 260s (1pc)5 Reviews
HobbyKing
TERMINATOR SUPER STAR WHEEL SET (1PAIR/BAG) BAJA 260 AND 260S
,
Terminator Super Star Wheel Set (1pair/bag) Baja 260 and 260S5 Reviews
HobbyKing
FRONT FRAME CONNECTING TUBE - 1/5 4WD BIG MONSTER
,
Front Frame Connecting Tube - 1/5 4WD Big MonsterHobbyKing
TIRE/WHEEL SET (2PCS/BAG) - A2030 AND A2031
| Wheel inner diameter | 75mm |
| Hex hub size | 12mm |
Spec:,
Tire/Wheel Set (2pcs/bag) - A2030 and A20315 Reviews
HobbyKing
TRACKSTAR 1/18TH SCALE 14T BRUSHLESS POWER SYSTEM (4300KV)
| Cont. Current | 18A |
| Burst Current | 25A |
| Car Size | 1/18th |
| L-BEC | 5V / 1A Output |
| Size | 30 x 26.1 x 13.8mm |
| Motor Plugs | 3.5mm Bullet type |
| Battery Plug | Required |
| On/Off Switch | Yes |
| Reverse | Yes |
| Turns | 14T |
| KV value | 4300KV |
| Diameter | 21.5mm |
| Motor length | 37mm |
| Extend shaft diameter | 2mm |
| Length of extend shaft | 11±0.5mm |
| Weight | 60g |
| No loading @ 7.2V | 1.8A |
| Max current | 30A |
| Resistance (Ω) | 0.037Ω |
| Battery range | 2~3s 7.4v~11.1v |
| Operation Temperature | 80° |
| Suitable car scale | 1/18 |
| Suitable ESC | 25A |
| Thickness of lamination | 0.2X20mm |
ESC Specification:, Battery:, 2-3 Cell Lipo / 4-9 Cell Ni-XX, Motor Type:, Sensorless Brushless, Weight:, 26g (Including wires), Motor Specifications:, Poles:4,
TrackStar performance now in comes in easy to select Combo ...5 Reviews
HobbyKing
TURNIGY 1/8TH SCALE 4 POLE BRUSHLESS MOTOR - 2100KV
| This motor is a perfect match for the Turnigy 160A 1 | 8th Scale Sensorless ESC, check out the related items below. |
| Turns | 2.0D |
| RPM/v | 2100 |
| Voltage | 3~5s Lipoly |
| Continuous Current | 80A |
| Peak Current | 140A |
| Resistance | 4.7mΩ |
| No Load Current | 3.7A |
| Dimension | 43 x 63.4mm |
| Shaft Length | 20mm |
| Shaft Diameter | 5mm |
| Weight | 220g |
Poles:4,
Purpose built for the high torque demands of 1/8th scale ...5 Reviews
HobbyKing
S2030-6570 BRUSHLESS INRUNNER 6560KV (7T)
| Motor Size | 2030 |
| RPM/V | 6560kv (7T) |
| Max Load | 14A |
| Max Volts | 11.1v (2~3s lipo) |
| Max Watts | 120w |
| Resistance | 0.0437 |
| Diameter | 20mm |
| Front Mounting Hole Distance | 16mm or 17mm |
| Shaft Diameter | 3mm |
| Shaft Length | 10mm |
| Can Size | 130 |
| Weight | 45g |
Front Mount Thread Size:, 16mm M2.5 / 17mm M3.0, Plug type:, 3mm Bullet-connector,
5 Reviews
HobbyKing
S2848-4370 BRUSHLESS INRUNNER (4370KV) (11T)
| Motor Size | 2848 |
| RPM/V | 4370kv (11T) |
| Max Load | 46A |
| Max volts | 11.1v 2s~3s |
| Max Watts | 500w |
| Resistance | 0.0127 |
| Diameter | 28mm |
| Front Mounting Hole Distance | 16mm or 19mm |
| Shaft Diameter | 3.17mm |
| Shaft Length | 12mm |
| Can Size | 380 |
| Weight | 142g |
Front Mount Thread Size:, 16mm M2.5 / 19mm M3.0, Plug type:, 3mm Bullet-connector,
5 Reviews
HobbyKing
S2445-3200 BRUSHLESS INRUNNER (3200KV) (14T)
| Motor Size | 2445 |
| RPM/V | 3200kv (14T) |
| Max Load | 17A |
| Max volts | 14.8v 2s~4s |
| Max Watts | 350w |
| Resistance | 0.0580 |
| Diameter | 24mm |
| Front Mounting Hole Distance | 16mm or 17mm |
| Shaft Diameter | 3mm |
| Shaft Length | 10mm |
| Can Size | 370 |
| Weight | 99g |
Front Mount Thread Size:, M2.5 (16mm) or M3.0 (17mm), Plug type:, 3mm Bullet-connector,
5 Reviews
HobbyKing
S2445-3890 BRUSHLESS INRUNNER 3890KV (12T)
| Motor Size | 2445 |
| RPM/V | 3860kv (12T) |
| Max Load | 32A |
| Max volts | 11.1v 2s~3s |
| Max Watts | 350w |
| Resistance | 0.0245 |
| Diameter | 24mm |
| Front Mounting Hole Distance | 16mm or 17mm |
| Shaft Diameter | 3mm |
| Shaft Length | 10mm |
| Can Size | 130 |
| Weight | 98g |
Front Mount Thread Size:, 16mm M2.5 / 17mm M3.0, Plug type:, 3mm Bullet-connector,
5 Reviews
HobbyKing
TROOPER SHORT COURSE TRUCK BODY RED- A2016T
,
Trooper Short Course Truck Body Red- A2016T5 Reviews
HobbyKing
DIFF. GEAR COMPLETE (1PC/BAG) - A2016T AND A3002
,
Diff. Gear Complete (1Pc/Bag) - A2016T and A30025 Reviews