RCPlanet
THUNDER TIGER PRO-21M-OB OUTBOARD MARINE ENGINE TTR9568
, Displacement(c.c./cu.in.):, 3.46 c.c./.211 cu.in., Bore(mm/in.):, 16.6 mm/0.654 in., Stroke(mm/in.):, 16.0 mm/0.630 in., Practical R.P.M.:, 3,000 ~ 38,000 rpm, Output(BHP/RPM):, 2.10 BHP/30,000 RPM, Weight(g/oz):, 720 g/25.39 oz, ,
This is the Thunder Tiger Pro-21M-OB Outboard Marine Engine with ...RCPlanet
ASSOCIATED CRANKCASE ZR.30 ASCLRP38550
, ,
Associated crankcase for the ZR .30 engine is constructed of ...RCPlanet
THUNDER TIGER PRO .46 BB ABN W/MUFFLER TTR9141
| Break-In | 11x5 |
| Sport and Scale | 10.5x6, 11x6 |
| Aerobatic | 10x6.5, 10.5x6, 11x5 |
, Displacement:, .455 cu in (7.46cc), Bore:, .853" (21.8mm), Stroke:, .7874" (20mm), Power Output:, 1.43 HP @ 16,000 RPM, Maximum RPM range:, 2,000 - 17,000 RPM, Practical RPM range:, 2,500 - 14,000 RPM, Weight (w/muffler):, 17.01oz (482g), Crankshaft thread size:, 1/4-28, Crankcase width (for engine mount):, 1.36", Exhaust mounting width (center to center):, 37mm, Overall height:, 3.4" (87mm), Overall width (w/mount flanges):, 1.97" (50mm), Overall length (backplate to front of drive washer):, 3.39" (86mm), Recommended prop size:, Recommended prop size:, Recommended prop size:, ,
Thunder Tiger Pro Series engines are equipped with twin ball ...RCPlanet
OFNA JLR SEDAN STARTER BOX OFN10260
, Length:, 9.8" (248mm), Width:, 5" (128mm), Height:, 3.1" (80mm) without post, Weight:, 1.8lbs (820g) without batteries, ,
Ofna starter box is lightweight and compact, easy to pack ...RCPlanet
RD LOGICS ALUMINUM FUEL TANK FOR T-MAXX 2.5 RDLTMX075S
, ,
This is the RD Logics Silver-colored Aluminum Fuel Tank for ...RCPlanet
O.S. ENGINES CYLINDER HEAD FS-70 SURPASS II OSM44004110
, ,
O.S. cylinder head replaces damaged intake manifolds. Constructed of aluminum ...RCPlanet
OFNA .28 PICCO JL TEAM TURBO OFN51234
, RPM:, 37,000, Claimed Horsepower:, 3.4, Ports:, 7, Stroke:, 0.69" (17.6mm), Bore:, 0.72" (18.35mm), Weight:, 12.3oz (350g), Distance Between Mounting Holes Same Side:, 0.83" (21mm), Distance Between Mounting Holes Opposite Side:, 1.5" (38mm), Height from Bottom of Crankcase to Top of Cylinder Head:, 4.4" (111mm), Height from Bottom of Mounting Tab/Top of Cylinder Head:, 3.8" (96mm), Height/Exhaust Port Center to Crankcase Bottom:, 1.8" (47mm), Width at Mounting Tabs:, 1.7" (44.2mm), Length from Backplate to End of Crankshaft:, 3.7" (94mm), Length from Backplate to Front Bearing:, 2.5" (64.5mm), Note:, Carburetor is factory adjusted. Only very small adjustments should be made. Ofna does not state specific number of turns for carb needles., ,
Ofna Picco .28 JL Team Turbo Engine is designed for ...RCPlanet
TRAXXAS FUEL TANK VIBRATION CUSHION RUBBER TRA4445
, ,
This is the Traxxas Rubber Fuel Tank Vibration Cushion for ...RCPlanet
O.S. ENGINES IL300 INLINE RING 80P CARB OSM36310
, Mixture Control Valve Setting:, Factory set, turn 1/12 turn (30°) clockwise to lean mixture or 1/12 turn (30°), counter-clockwise to richen mixture, Needle Valve Adjustment:, After engine is primed, approximately ¼ turn Open from fully Closed, Displacement:, 0.765 cu in x 4 (12.5cc x 4), Bore:, 1.02" (25.8mm), Stroke:, .94" (24mm), Practical RPM:, 1,800-8,000, Weight:, 82oz (2,350g), Distance between Mounting Holes Same Side:, 3.1" (78.7mm), Distance between Mounting Holes Opposite Side:, 2.8" (71mm), Distance from rear of Engine Mount to Carburetor:, 4.4" (111.8mm), Distance from rear of Engine Mount to Prop Hub:, 9.2" (234.3mm), Distance/rear of Engine Mount to Outer Mounting Holes:, 5.2" (133mm), Distance between Cylinder Centers:, 1.6" (40mm), Height from Crankshaft Center to top of Engine:, 4.6" (116.8mm), Height/Crankshaft Center to Upper Engine Mount Hole:, 2" (50.8mm), Height/Crankshaft Center to Lower Engine Mount Hole:, 1.6" (40.6mm), Width between Engine Mount Holes:, 3" (76.2mm), Height between Engine Mount Holes:, 3.5" (89mm), ,
O.S. Engine Max IL-300 Dia-Star 4-Cylinder, 4-Stroke Inline Limited Edition ...RCPlanet
O.S. ENGINES FS200S RING #80N CARB F6010 MUFFLER OSM35940
, Displacement:, 1.98 cu in (32.4cc), Bore:, 1.50" (38.0mm), Stroke:, 1.13" (28.6mm), Practical RPM:, 1,800 - 10,000, Output:, 2.9 PS, 2.86 HP/9000 RPM, Weight:, 32.8oz (930g) without muffler, Weight:, 34.2oz (970g) with muffler, Crankshaft Thread Size:, 5/16-24, Break-in Carburetor Settings, Needle Valve:, 3-4 turns open from fully closed, Idle Mixture:, Slightly rich (45-60°) from highest RPM setting, Mixture Control Valve:, 3 turns in from counterclockwise, Distance Between Mounting Holes Same Side:, 0.98" (25mm), Distance Between Mounting Holes Opposite Side:, 2.3" (58mm), Height from Crankcase Bottom to Rocker Cover:, 5.7" (144mm), Height from Crankshaft Center to Rocker Cover:, 4.7" (119mm), Height from Crankshaft Center to Muffler Center:, 3.2" (82mm), Distance from Crankcase Center to Prop Hub:, 0.27" (77mm), Width at Mounting Tabs:, 2.6" (67mm), Width of Crankcase Below Mounting Tabs:, 1.9" (48mm), Width of Cylinder Head:, 2.2" (58mm), Distance from Carburetor to end of Crankshaft:, 6.8" (172mm), Distance from Carburetor to Crankcase Center:, 2.3" (58.5mm), Distance from Carburetor to Prop Hub:, 5.3" (135.5mm), ,
O.S. Max Surpass FS-200U four stroke glow engine powers any ...RCPlanet
HPI K4.6 .28 NITRO STAR ENGINE WPULL START HPI15201
, Crankcase:, 3.29" (83.5mm) (from rear of case to front without shaft), Height:, 4.40" (111mm) (from bottom of case to the top of the head), Width:, 1.81" (mount flange), Mount Holes:, 1.42" (measured from center to center width), Mount Holes:, .82" (Between holes front and back), RPM:, Max 39,000 RPM, Horsepower:, 2.9 @ 35,000 RPM, Crankshaft diameter:, 5mm (clutch bell area), Crankshaft diameter:, 6.7mm (threaded portion), Crankshaft screw:, 3 x 12mm caphead screw, Capacity:, 4.60cc (.28 ci), ,
HPI Racing's new Nitro Star K4.6 engine packs a serious ...RCPlanet
TRAXXAS HEADER SPRING/GASKETS TRX 3.3 TRA5254
, ,
Traxxas header spring and gaskets for the TRX 2.5, TRX ...RCPlanet
TRAXXAS ENGINE MOUNT COMPLETE ASSEMBLY REVO TRA5360
, ,
Traxxas engine mount for the Revo. This mount attaches engine ...RCPlanet
THUNDER TIGER PRO .12BK W/ROTARY CARB TTR9459
, Displacement:, .129 cu in (2.11cc), Bore:, 0.545" (13.85mm), Stroke:, 0.551" (14.0mm), Practical RPM:, 3,000 - 30,000, Output:, 0.60 HP @ 29,000 rpm, Weight:, 8.28oz (234g), Carburetor Settings, Needle Valve:, 2-1/2 - 3 turns counterclockwise from closed, Air Bleed Screw:, After setting needle valve, 1/8 turn clockwise if mixture is too rich or 1/8 turn counter-clockwise if mixture is too lean, Height from Mounting Tab Bottom/Top of Cylinder Head:, 2.7" (68.3mm), Height from Crankcase Bottom to Top of Cylinder Head:, 3.1" (80mm), Width at Mounting Tabs:, 1.6" (39.5mm), Width of Crankcase below Mounting Tabs:, 1" (25.4mm), Center of Mounting Holes Same Side:, 0.43" (11mm), Center of Mounting Holes Opposite Side:, 1.2" (32mm), Center of Crankcase to Front Bearing:, 1.3" (34.5mm), Distance from Shaft Starter to Front Bearing:, 2.6" (66mm), Note:, The carburetor is preset from the factory and requires only small adjustments, ,
Thunder Tiger new Pro-12/15/18 are available in several versions with ...