ReadyMadeRC
TURNIGY TG9E 9G / 1.5KG / 0.10SEC MICRO SERVO
| Dimension | 23x12.2x29mm |
| Torque | 1.5kg/cm (4.8V) |
| Operating speed | 0.10sec/60 degree |
| Operating voltage | 4.8V |
| Temperature range | 0-55C |
| Dead band-width | 7us |
ReadyMadeRC
AEROSIM RC FLIGHT SIMULATOR
| http | //vimeo.com/11409098 |
| http | //www.youtube.com/watch?v=lMVr1nE58WU |
| http | //www.youtube.com/watch?v=g110XcnWwFY |
| There are two Training Programs | (1) Airplane, and (2) Helicopter/Multicopter. |
The USB interface is fitted with a 3.5 mono jack that can be directly used with JR/Spektrum/HitecAurora/Turnigy/GraupnerMX. An adapter is required for other transmiters (sold separately), consisting on a short cable with a female 3.5 mono jack on on one end, and the right type of connector for the particular transmitter on the other end. Available connectors include: Futaba Square Plug, DIN6 for Futaba Round Plug and Hitec, Multiplex (DIN5, compatible with DIN7 and DIN8), Graupner with Trainer Socket (jack 3.5mm stereo), and ESky/WFly/Storm (minDIN4)., Please, watch these simulated FPV videos:, FPV flight:, This is the video created by Holger, showing the performance of the MK models in the simulator:, Here is the MK promotional video:,
Description This high quality RC flight simulator includes a CD ...ReadyMadeRC
LOW NOISE 5A REGULATOR (UBEC) W/NOISE REDUCTION
| Type | Switching |
| Output (Constant) | 5v/5A or 6v/5A |
| Weight | 18g |
Input protection:, Reverse polarity protection, Input:, 8v-26v (2-7cell lipo),
THIS ITEM HAS BEEN REPLACED WITH THE RMRC 5A UBEC ...ReadyMadeRC
LOW NOISE 3A REGULATOR (UBEC) W/NOISE REDUCTION
| Output | 5v/3A or 6v/3A (Selectable via jumper) |
| Noise | <50mVp-p(@2A/12v) |
| Input | 5.5v-23v (2-5S Lipo pack, 5-15cells NiMh) |
| Size | 41.6x16.6x7.0mm |
| Weight | 7.5g |
ReadyMadeRC
FAT SHARK HEAD TRACKER TO 3.5MM DATA CABLE (DX8, OTHER)
Note: Most JR/Spektrum radios do NOT have the correct trainer functions to work with a head tracker. So far, only the DX8 has been verified to work.,
This cable will allow you to hook up your FatShark ...ReadyMadeRC
HOBBYWING PROGRAMMING CARD
| Note | This program card is available for HOBBYWING's Pentium , Flyfun, Guard, Sword series ESC. |
| Size | 92mm (L) * 52mm (W) * 6mm (H). |
| Weight | 26g. |
Input Voltage: 4.8-6V (If the ESC has not a built-in BEC, you must use an additional battery pack to supply the program card),
With HOBBYWING's Program Card, you can easily set the programmable ...ReadyMadeRC
HOBBYWING LCD ESC PROGRAMMER
| Weight | 84g. |
This program card is suitable for the following ESCs:, 1. XERUN Series Car ESC (Version 2.0), Size:, 90mm (L) * 51mm (W) * 17mm (H), Input Voltage:, 4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box), are:, 3.1 Running Mode, are:, 3.1 Brake Setting, New:, Additional Instruction of 110119_STOCK firmware,
Model Advanced Professional LCD Program Box Manual User Manual #1 ...ReadyMadeRC
RMRC260 DIGITAL SERVO (BEARING/METAL GEAR)
| Dimension | 22.5*11.5*24.6mm |
| Torque | 2.0kg/cm (6V) |
| Weight | 12g |
| Operating voltage | 4.5V-6V |
| Dead band-width | 4us |
Travel:, 90* /one side pulse traveling 400us, Gear Material:, 4 metal gears and 1 nylon gear, Operating speed:, 0.10sec/60 degree 6V 0.12sec/60 degree 4.8V,
An excellent servo option for extreme pan and tilt! (Or ...