GetFPV
FM4006-13 740kv
,
Details
The Lumeneir FM-4006-13 740kv multi rotor motor is a powerful pancake motor specifically designed for multi-rotors. It performs well with 10" props and is a good choice for Lumenier's QAV500 FPV Quadcopter and the QAV540G. The motor has a 19x15mm mounting hole pattern and requires M3 screws to mount (not included). This motor is produced for Lumenier by Tiger Motors, the leaders in multi-rotor motors. The FM4006 is a more affordable version of the very popular MT4006 at almost 40% savings. Compared to the Tiger MT4006 the FM4006 uses lower grade ball bearings, which can be upgraded at a later point if necessary. The FM4006 motor uses the same high quality bell and base as the MT4006.
Included
One motor with long motor cables and bullet connectors pre soldered
One 6mm diameter prop adapter
One prop washer and nut (no 'spinner')
3x Socket Hex screws to mount the prop adapter
Mounting screws are NOT included with this motor
. Use an M3 threaded screw. For example, a suitable screw for mounting this motor to a 1.6mm carbon fiber or G10 motor mounting plate would be a M3 x 5mm or 6mm button head socket screw. The fpvmanuals QAV400 and QAV500 frames do include mounting screws suitable for this motor.
Please Note
Use "HIGH" timing for PWM ESCs
Motor does not work with some MK i2c speed controllers
To use with
SimonK flashed ESCs
, please use the latest SimonK firmware
While the shaft is 4mm, the included prop-adapter is 6mm! Keep that in mind when sizing props or prop spacers. For instance, to make this motor work with 10" Graupner E-Props requires a
8mm to 6mm prop reducer
Replacement Bearings or Bearings Upgrade
If desired, these motors can be upgraded to high-end, ceramic bearings from Boca Bearings. Boca sells bearing kits that come with 2 bearings per kit. You will need 1 kit (2 bearings) per motor.
Choose one of 3 quality levels of bearings
.
You can also upgrade the motor to use the same
bearings as the MT4006
series from Tiger Motors.
Check price and availability
Found 10 years, 7 months ago