ReadyMadeRC
EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - WIRE LEADS
| COMPATIBLE | PCM, SPPM and S.BUS |
| FLEXIBLE | fly with or without your FPV equipment |
| REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| Virtual SPPM RSSI | some receivers output RSSI and link quality via the SPPM interface, which is supported |
satellites, in addition to other improvements, which can provide the following benefits:, , has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers. The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU. The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics? The Vector changes all that. WARNING: a full color OSD can be addictive! :) Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3D with or without heading lock, ,
Now includes V2 GPS unit! (Requires GPS firmware v1.81 update ...ReadyMadeRC
EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - DEANS
| COMPATIBLE | PCM, SPPM and S.BUS |
| FLEXIBLE | fly with or without your FPV equipment |
| REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| Virtual SPPM RSSI | some receivers output RSSI and link quality via the SPPM interface, which is supported |
satellites, in addition to other improvements, which can provide the following benefits:, , Years in the making, the Vector has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers. The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU. The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics? The Vector changes all that. WARNING: a full color OSD can be addictive! :) Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3,
Now includes V2 GPS unit! (Requires GPS firmware v1.81 update ...ReadyMadeRC
CXN - GOPRO HERO3 + FPV CAMERA PAN & TILT VERSION 2
IMPORTANT: Servo measurements are different between brands, this mount was designed using this servos below (you can use other brands just be sure to,
This version is made only for the Hero 3 or ...ReadyMadeRC
FORCEFLY STARTER KIT
| ForceFly Wiki | Programming and using the ForceFly |
| ForceFly Wiki | Programming and using the ForceFly |
This starter kit includes:, , ForceFly introduction video:, ,
The Programmable USB Joystick Interface for Radio Control Applications 1 ...ReadyMadeRC
CC3D ATOM OPENPILOT COPTERCONTROL BOARD BY RMRC (RIGHT ANGLE)
| Note | We recommend |
CC3D from the OpenPilot project introduces a hardware refresh of the highly regarded multi-purpose aircraft stabilization platform. The CopterControl platform has been designed from the ground up to perform the following functions:, , The CopterControl hardware has the following features:, , For info:,
updating your controller to 14.10 release, especially for mini quads ...ReadyMadeRC
CC3D ATOM OPENPILOT COPTERCONTROL BOARD BY RMRC (STRAIGHT PINS)
| Note | We recommend |
CC3D from the OpenPilot project introduces a hardware refresh of the highly regarded multi-purpose aircraft stabilization platform. The CopterControl platform has been designed from the ground up to perform the following functions:, , The CopterControl hardware has the following features:, , For info:,
updating your controller to 14.10 release, especially for mini quads ...ReadyMadeRC
FULL NAZE 32 - FLIGHT CONTROLLER
Specifications:, , Notice:, NAZE boards can vary in color from batch to batch. We cannot guarantee which color you will receive.,
FunFly Controller "Naze 32" (Includes Right Angle pins) Designed for ...ReadyMadeRC
F4U-1A CORSAIR PNP
| Wingspan | 44.0 in (1120mm) |
| Overall Length | 36.0 in (915mm) |
| Motor Size | 15-size 950Kv brushless outrunner (installed) |
| Radio | 4+ channel minimum radio system required (6+ for flaps and retracts) |
| Prop Size | 9.5 x 7.5 |
| Speed Control | 30-amp Pro Switch-Mode BEC brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C Li-Po |
| Flaps | Optional |
| Retracts | Optional |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts and flaps installed,
Take to the Skies with the Famous Gull-Wing Fighter from ...ReadyMadeRC
PARKZONE - F4U-1A CORSAIR BNF PKZ6080
| Wingspan | 44.0 in (1120mm) |
| Overall Length | 36.0 in (915mm) |
| Motor Size | 15-size 950Kv brushless outrunner (installed) |
| Radio | AR600 6-channel DSMX® receiver (installed) |
| Prop Size | 9.5 x 7.5 |
| Speed Control | 30-amp Pro Switch-Mode BEC brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C Li-Po (included) |
| Flaps | Optional |
| Retracts | Optional |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Charger | 2- to 3-cell DC variable rate Li-Po charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts and flaps installed,
Take to the Skies with the Famous Gull-Wing Fighter from ...ReadyMadeRC
UMX RADIAN BNF
| Wingspan | 28.7 in (730mm) |
| Overall Length | 16.5 in (418mm) |
| Flying Weight | 1.50 oz (43 g) |
| Motor Size | 8.5mm coreless brushed motor |
| Radio | 4+ channel transmitter required |
| CG (center of gravity) | 1.22 in (31mm) back from the leading edge of wing at wing root |
| Recommended Battery | 1S 3.7V 150mAh 25C LiPo |
| Approx. Flying Duration | 8-10 minutes |
| Charger | 1S 300mA LiPo USB Charger |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Indoor/Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
® technology gives a pilot the feeling of flying a much larger glider especially outdoors because of its renowned ability to smooth out the effects of wind and turbulence. Its distinctively curved wing delivers outstanding lift and impressive glide ratio using 3-channel control simplicity. The lightweight brushed power system requires just a single-cell Li-Po battery to provide excellent launch performance and long flight times. Plus the one-piece wing can be easily removed and stored in the handle-equipped box making your ability to soar through the clouds as convenient as can be. You’ll be in the air in no time thanks to great features like:, , Flaps: No,
The first ultra micro motor glider with AS3X® technology. Features ...ReadyMadeRC
CARBON-Z CUB BNF BASIC
| Wingspan | 84.6 in (215 cm) |
| Overall Length | 55.8 in (142 cm) |
| Wing Area | 1100 sq. in. (71.0 sq. dm.) |
| Flying Weight | 8.15 lb (3.70 kg) |
| Motor Size | 50-size brushless outrunner (installed) |
| Radio | 6+ channel DSM2/DSMX transmitter (required) |
| Servos | (4) 26-gram MG mini servos, (2) 13-gram micro servos (installed) |
| CG (center of gravity) | 4.72 in (120mm) back from leading edge of wing |
| Wing Loading | 17 oz/sq ft |
| Prop Size | 15 x 5.5 Electric (included) |
| Speed Control | 60-amp brushless (installed) |
| Recommended Battery | 22.2V 6S 3200mAh LiPo (required) |
| Flaps | Yes |
| Approx. Flying Duration | 7 minutes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
| Spinner Size | 2.64 in (67mm) |
Optional Accessories:, - Float set (EFL1045016), Retracts: No,
Features Easy-to-complete final assembly Quique Somenzini design and attention to ...ReadyMadeRC
PARKZONE ARCHER BNF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | AR400 4-channel receiver (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...ReadyMadeRC
SPORT CUB S BNF WITH SAFE
| Wingspan | 24.3 in (616mm) |
| Overall Length | 16.3 in (414.5mm) |
| Flying Weight | 2.0 oz (57 g) |
| Radio | 4+ channel DSM2/DSMX transmitter required |
| Trim Scheme Colors | Blue and White |
| Prop Size | 130 x 70mm |
| Recommended Battery | 3.7V 1S 150mAh Li-Po (Included) |
| Charger | Fast DC Charger with USB port connectivity |
| Landing Gear | Fixed main with steerable tail wheel |
| Experience Level | Beginner |
| Recommended Environment | Indoor/Outdoor |
Is Assembly Required: No,
Learn at your own pace with the HobbyZone® Sport Cub ...ReadyMadeRC
PARKZONE - MOSQUITO MK VI BNF PKZ6350
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
PARKZONE - SPORT CUB BNF PKZ6880
| Wingspan | 51.0 in (1300mm) |
| Overall Length | 34.0 in (865mm) |
| Flying Weight | 33.3 oz (945 g) |
| Motor Size | 480 Brushless Motor 960Kv |
| Radio | 4+ channel (5+ channel for optional flaps) (required) |
| Prop Size | 9 x 6 |
| Speed Control | 18 amp brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 1300mAH LiPo battery (included) |
| Flaps | Optional |
| Landing Gear | Yes |
| Steering | Yes |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |