ReadyMadeRC
DJI NAZA-M V2, MAIN CONTROLLER, PMU LED, NO GPS
| What’s new with the NAZAM V2 | Hardware |
| What’s new with the NAZAM V2 | Firmware and functions |
| Motor Disarm | There are two modes of Motor Disarm |
| VU Input | 7.4V ~ 26.0 V |
| Output(V-SEN port red wire) | 3A@5V |
| (burst current | 7.5A) |
| MAX | 3.15W(0.25A@12.6V) |
| Normal | 1.638W(0.13A@12.6V) |
| Vertical | ±0.8m |
| Horizontal | ±2.5m |
| PMU | 28g |
| GPS | 27g |
| LED | 13g |
| PMU | 39.5mm x 27.5mm x 10.0mm |
| LED | 25mm x 25mm x 7.0mm |
| Notice | Flight Performance can be effected by mechanical performance and payloads |
Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
Can not be back-ordered. PMU V2 - New case design ...ReadyMadeRC
DJI NAZA-M V2 MULTIROTOR AUTOPILOT W/GPS
| What’s new with the NAZAM V2 | Hardware |
| What’s new with the NAZAM V2 | Firmware and functions |
| Motor Disarm | There are two modes of Motor Disarm |
| VU Input | 7.4V ~ 26.0 V |
| Output(V-SEN port red wire) | 3A@5V |
| (burst current | 7.5A) |
| MAX | 3.15W(0.25A@12.6V) |
| Normal | 1.638W(0.13A@12.6V) |
| Vertical | ±0.8m |
| Horizontal | ±2.5m |
| PMU | 28g |
| GPS | 27g |
| LED | 13g |
| PMU | 39.5mm x 27.5mm x 10.0mm |
| LED | 25mm x 25mm x 7.0mm |
| Notice | Flight Performance can be effected by mechanical performance and payloads |
Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
PMU V2 - New case design with CANBUS port. Enhanced ...ReadyMadeRC
TSLRS TX700 UHF TRANSMITTER
,
More specs to be added as they become available. Tx700 ...ReadyMadeRC
DJI A2 FLIGHT CONTROLLER SYSTEM AND DJI OSD MKII COMBO
| PLEASE NOTE | This includes qty 1 DJI A2 Multi Rotor Flight Controller AutoPilot System and qty 1 DJI iOSD MkII. |
| The A2 supports 9 types of traditional motor mixer | Quad I, Quad X |
ATTENTION: Despite claims by DJI and other resellers indicating this controller is for commercial use, be aware that it is not currently legal in the US to operate aircraft, even remote controlled like these, commercially without an appropriate FCC waiver or COA. These are sold for amateur use only., Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly., It offers three types of control modes: GPS Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. The Flight controller can also adjust automatically within the changing flight environment and intelligently switch between GPS Mode and Atti. Mode to make sure the flight is safe. In manual mode position the operator can choose between manual and attitude. It also supports an RTH Switch from the Transmitter., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures (Mode 2):, In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor. See the following figures (Mode 2):, , A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest ,
A2 Multi-rotor Stabilization Controller DJI A2 multi-rotor stabilization controller is ...ReadyMadeRC
DJI A2 MULTI-ROTOR STABILIZATION CONTROLLER
| PLEASE NOTE | This includes qty 1 DJI A2 Multi Rotor Flight Controller AutoPilot System, does not include iOSD. |
| The A2 supports 9 types of traditional motor mixer | Quad I, Quad X |
ATTENTION: Despite claims by DJI and other resellers indicating this controller is for commercial use, be aware that it is not currently legal in the US to operate aircraft, even remote controlled like these, commercially without an appropriate FCC waiver or COA. These are sold for amateur use only., Different from other DJI flight controllers, the A2 offers a comprehensive online firmware upgrade ability: the Controller, IMU and GPS Pro, Receiver and Bluetooth LED indicator can be upgraded online through the assistant software separately. Lets you experience the latest technology comprehensively and quickly., It offers three types of control modes: GPS Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. The Flight controller can also adjust automatically within the changing flight environment and intelligently switch between GPS Mode and Atti. Mode to make sure the flight is safe. In manual mode position the operator can choose between manual and attitude. It also supports an RTH Switch from the Transmitter., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures (Mode 2):, In home lock flying, the forward direction is the same as the direction from home point to the multi-rotor. See the following figures (Mode 2):, , A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest w,
A2 Multi-rotor Stabilization Controller DJI A2 multi-rotor stabilization controller is ...ReadyMadeRC
PARKFLYER SWITCH-MODE BEC 6V
| Input voltage | 8V to 33.6V (3s-8s lithium, up to 21 NiMHs) |
| Output current | 1.25A continuous, 1.5A 60 second peak (6 4-9g servos, 4 standard servos) |
| Weight | 6.5g/.23oz |
| Weight without wires | 4.4g/.16oz |
Weight:, 6.5g / 0.23oz, Model:, ParkBEC 6V, Specifications:, Applications:, Parkflyers,
(no wires) 4.4g / 0.16oz Product Description The ParkBEC 6V ...ReadyMadeRC
SPORTBEC SWITCH-MODE BEC
| Input voltage | 9V to 33.6v (3s-8s lithium, up to 21 NiMHs) |
| Output current | 3.5A (~8 standard servos, 4-6 digital) |
| Weight | 13g/.46oz (including wires) |
Price:, $29.99, Weight:, (with wires) 13g / .46oz, Model:, SportBEC, Specifications:, Applications:, Sport aircraft,
SportBEC is the higher capacity version of our best-selling ParkBEC ...ReadyMadeRC
TRANSMITTER MONITOR TRAY - LARGE (WITH HARDWARE)
| Maximum handle size | 105 x 5mm |
Features:, , fit with this mount:,
Finally, a strong and lightweight monitor mount that won't break ...ReadyMadeRC
TRANSMITTER MONITOR TRAY - SMALL (WITH HARDWARE)
| Maximum handle size | 105 x 5mm |
Features:, , fit with this mount:,
Finally, a strong and lightweight monitor mount that won't break ...ReadyMadeRC
NECK STRAP BALANCER FOR MONITOR MOUNT - VERTICAL
,
Neck Strap Balancer for Monitor Mount - Vertical mount style ...ReadyMadeRC
NECK STRAP BALANCER FOR MONITOR MOUNT - HORIZONTAL
,
Neck Strap Balancer for Monitor Mount - Horizontal mount style ...ReadyMadeRC
CC3D OPENPILOT COPTERCONTROL BOARD BY READYMADERC (RIGHT ANGLE)
CC3D from the OpenPilot project introduces a hardware refresh of the highly regarded multi-purpose aircraft stabilization platform. The CopterControl platform has been designed from the ground up to perform the following functions:, , The CopterControl hardware has the following features:, , For info:,
CopterControl 3D (CC3D) from the OpenPilot project introduces a new ...ReadyMadeRC
FAT SHARK ATTITUDESD V2 VGA VIDEO GLASSES
| Note | Battery, charger and adjustable earphones are sold separately. |
| Option 1 | The |
| Option 2 | If you want to share the power supply with your ground station, the |
| Option 3 | Any 2s-3s lipo with a 2.1mm barrell connector like |
| Interpupillary (IPD) distance | 59-69mm (adjustable) |
| Power input | 7-13V (2s/3s supply) |
| Power Consumption @7.4VDC | 200/350mA (direct/wireless) |
| Weight | 150g |
| Power Supply | 7-13V (2s-3s supply) |
| Power consumption | 310mA@7.4VDC |
| Transmitting Power | 250mW |
| Ch1 | 5740, CH2 |
| Weight | 22g with antenna |
Kit includes:, - AtttitudeV2 headset (with integrated 5G8 RX and Trinity HT), Mechanical:, 55x26x11mm, *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
AttitudeSD FPV goggles (VGA, 640X480) with NexwaveRF 5G8 receiver, Trinity ...ReadyMadeRC
EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - XT60
| COMPATIBLE | PCM, SPPM and S.BUS |
| FLEXIBLE | fly with or without your FPV equipment |
| REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| Virtual SPPM RSSI | some receivers output RSSI and link quality via the SPPM interface, which is supported |
has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers. The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU. The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics? The Vector changes all that. WARNING: a full color OSD can be addictive! :) Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3D with or without heading lock, for doing acrobatics when you get bored just flying along. :) Great for holding 3D positio,
The Vector's wiring harness functions perfectly with RMRC camera and ...ReadyMadeRC
EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - WIRE LEADS
| COMPATIBLE | PCM, SPPM and S.BUS |
| FLEXIBLE | fly with or without your FPV equipment |
| REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| Virtual SPPM RSSI | some receivers output RSSI and link quality via the SPPM interface, which is supported |
satellites, in addition to other improvements, which can provide the following benefits:, , has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers. The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU. The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics? The Vector changes all that. WARNING: a full color OSD can be addictive! :) Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3D with or without heading lock, ,
Now includes V2 GPS unit! (Requires GPS firmware v1.81 update ...