Flying-Hobby
RADIX 690MM V2 MAIN ROTOR BLADES
| Length bolt hole to tip | 690mm |
| Weight | 185 |
| Root | 12mm |
| Washers included for | 14mm, 16mm, 18mm |
| Bolt Hole | 5mm |
| Sleeve inclued for | 4mm bolt |
Blade Specs:,
Root Details General Notes -Washers included in lid of box. ...Flying-Hobby
EDGE 72MM SE CF TAIL BLADES
Blades EDGE ..." />
| Specs | - Length |
| - Width | 21-24.5mm |
| - Root | 5mm |
| - Bolt Hole | 3mm |
| - Weight | ~ 4.5 grams each |
Features:, - Airfoil designed specifically for high speed tail rotor application., Includes:, - One pair of EDGE blades.,
LE-72SE EDGE 72mm SE Premium CF Tail Rotor Blades EDGE ...Flying-Hobby
T-REX 700 FLYBARLESS MAIN BLADE GRIPS
blade grips for the Trex 700 Flybarless Head ..." />
| Includes | 2X blade grips and 4X Radial Bearings (already installed) |
| NOTE | does not include Thrust washer (or Thrust Bearings |
Flying-Hobby
T-REX500 MAIN BLADE HOLDER/NEW
blades more ..." />
| Instruction | Use for T-REX 500. |
Specification:, Main blade holder x 1(foam),
Ultra-high hardness foam, high wear resistance, makes your blades more ...Flying-Hobby
TAIL ROTOR BLADE/NEW
Instruction:, New tail blade features precision center of gravity and efficient wing design, this blade ensures the lock of the tail when reversing in high speed, better resistance to the wind! The tail reverse torque makes the rotation more smooth, the angle and action of the 4 point tic tock are more pricise., Specification:, Tail rotor blade x 4,
Flying-Hobby
ROTORTECH 600MM CF BLADES (T-REX 600)
| Length | 600mm |
| Width | 55mm |
| Weight | 140gm |
| C.G. | 23% |
| Grip | 12mm |
| Hole | 4mm |
| Airfoil | Symmetrical |
| Tip | Angled |
| Make | Carbon Fiber |
| Common Application | 46-50 Size RC Helicopters |
Specifications:, Includes:, 1x 3D/holographic decal sheet, RotorTech™ Standard Features:, Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.,
4x washers Low parasitic drag coeficient due to the efficient ...Flying-Hobby
100 MAIN BLADES
| Instruction | ●Use for T-REX 100. |
| ●Shape | None Symmetrical wing |
| ●Length | 103.4 mm |
| ●Weight | 2.5g/set |
Specification:, Specification:, ●Main Blades x 1 set,
●Round headed cross self tapping screw(T1.4x4mm) x 2Flying-Hobby
NOVA GOBLIN 500 MAIN BLADE GRIP ARM (2PCS)
Included:, Aluminum Main Blade Grip Arm x 2pcs,
Screw M2.5x10 x 2pcs Screw M2.5x4 x 2pcsFlying-Hobby
SAB ALUMINUM BLADE GRIP ARM SET - HPS 700/GOBLIN 770
Included:, Aluminum Blade Grip Arm x 2pcs, Use for:, - Goblin 700 HPS head only,
DIN 12.9 Socket Head Cap M3x10 x 2pcs Uniball M3x4 ...Flying-Hobby
T-REX 700 FLYBARLESS MAIN BLADE GRIP BOLTS AND NUTS 5MM X 34MM (2PCS)
| Size | 5x34mm with 26.5mm unthreaded Shank |
| Includes | 2 bolts and 2 nyloc nuts |
| Note | Can also be used on any head that uses a 5mm x 34mm Main Blade Bolt |
Flying-Hobby
MAIN BLADE HOLDER (FOR CB180Q )
Detail :, Walkera Dragonfly Spare Parts HM-CB180-Z-03-Q Main Blade Holder,
Flying-Hobby
HIGH QUALITY CARBON FIBER MAIN BLADES (600MM) - FBL
| Blade type | Symmetrical |
| Length | 600mm |
| Width | 56mm |
| Blade thickness | 8.5mm |
| Root thickness | 12mm |
| Screw holes | 4mm |
| Weight | 230g/pair |
| Application | T-REX 600 and 50 size helis |
Flying-Hobby
ROTORTECH 720MM CARBON BLADES MAIN BLADE
| Length | 720mm |
| Width | 61.5mm |
| Grip | 14mm |
| Hole | 4-5mm |
| Material | Carbon fiber |
| Air-Foil | Symmeterical |
RotorTech™ Standard Features:, Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.,
- Specification - Low parasitic drag coeficient due to the ...Flying-Hobby
ALIGN 500 FOUR BLADES FEATHERING SHAFT
| Instruction | ●Use for T-REX 500. |
| ●Must with | 500 Four Blades Main Rotor Head assembly(H50145). |
Specification:, ●Feathering shaft x 4(Φ10xΦ7.9x35mm),
●Feathering shaft washer x 4(Φ3xΦ10x1mm) ●Washer x 4(Φ6.1xΦ10.5x0.4mm) ●Socket screw ...