ReadyMadeRC
BOBCAT 6 CHANNEL 1.14M WINGSPAN PUSHER (KIT)
| Material | EPO |
| Wingspan | 1143mm(45inch) |
| Flying Weight | 1400g（49.5oz） |
| WingArea | 31d㎡(480in2) |
| Wingload | 50g/d㎡(16oz/sq.ft) |
| Drive System (Recommended) | 3648 KV1250 motor |
| Servos Required | 7*9g servos |
| Propeller | 7*6 3 Blade Custom |
| Battery Recomended | 14.8V,2700-3300mAh Li-polymer |
| Control system | Minimum 6 CH |
ReadyMadeRC
SUPER SKY SURFER 2000 PNP
| Material | EPO |
| Wingspan | 2000mm(78.74inch) |
| Flying Weight | 1500g（53oz） |
| Motor | 3536 1000KV Brushless |
| Servos | 4*17g servos |
| Propeller | 9x4(Three blade) |
| Battery | 11.1V ,3S 2200mAh-3300mAh recommended (not included) |
Technical Details:, , Includes:, , Requires:,
Another great option for RC and FPV flight! The Super ...ReadyMadeRC
SPANKY MINI QUAD FRAME - FLAT G10 (HARDWARE INCLUDED) REALFPV
| Flight Controller | Naze32 Acro |
Recommended Equipment:, Motors:, Tiger MN 1806 2300kv (3s-4s), :Gemfan 10A, Prop:, 2 blade 5030 Gemfan, 2 Blade 5 x 4 HQ Composite, 2 Blade 6030 HQ Composite,
"Spanky" Mini Quad Frame from RealFPV This quad frame is ...ReadyMadeRC
BLACKOUT MINI SPIDER HEX FRAME
| Frame Weight | 220 grams |
| Materials | 3k Twill Weave Carbon Fiber |
| Fasteners | Stainless Steel & Black Nylon 6/6 |
| Size | 290mm MTM |
| Flight Controller Mount | 30.5mm x 30.5mm & 45mm x 45mm |
| Board Camera Mount | 32mm x 32mm |
| GPS Mount | 30.5mm x 30.5mm |
| GoPro Protection | Accepts RMRC GoProtector & Eyefly GoPro 3 Carbon Fiber (or G10) case |
| Motors | Tiger MN1806 2300kv Motor |
| Propeller | GemFan 5x3 2 Blade |
| ESC | 12 - 15amp |
| Battery | 3S 3300mah 35C/70C |
| Flight Controller | RMRC CC3D |
| HD Camera | GoPro 3 |
Version: 1, Maximum Propeller: 5", Motor Mount: M2 12mm - 16mm (Tiger MN1806 2300kv, RCX 1804 2400kv), M3 19mm (Tiger MT2206 2000kv, Sunnysky X2204 2300kv),
Description The Blackout Mini Spider Hex is a low weight ...ReadyMadeRC
DRONE FRAMES - G-10 DRQ250 "MINI-D" - GLASS FIBER
| Flight Controller | Naze32 Acro |
| HD Camera | Mobius |
| Frame weight | 138-145 grams |
From Ubay at Drone Frames:, The “Mini D” is a Clean/Dirty plate design separated by M3 dampers that allows you to take jello-free videos with your HD camera. I have flown it numerous times now but have never had any "jello" issues. So, what makes this frame different?, 3 different thickness of G10 plates were used:, , Different Variables for FPV/REC camera:, , Recommended Equipment:, Motors:, Tiger MN 1806 2300kv (3s-4s), :Gemfan 10A, Prop:, 2 blade 5030 Gemfan, 2 Blade 5 x 4 HQ Composite, 2 Blade 6030 HQ Composite,
Arms - 3mm thickness and individual, so very easy to ...ReadyMadeRC
DRONE FRAMES - CF DRQ250 "MINI-D" - CARBON FIBER
| Flight Controller | Naze32 Acro |
| HD Camera | Mobius HD cam or GoPro Hero 3 |
| Frame weight | 125 grams |
From Ubay at Drone Frames:, The “Mini D” is a Clean/Dirty plate design separated by M3 dampers that allows you to take jello-free videos with your HD camera. I have flown it numerous times now but have never had any "jello" issues. So, what makes this frame different?, 3 different thickness of carbon fiber plates were used:, , Different Variables for FPV/REC camera:, , Recommended Equipment:, Motors:, Tiger MN 1806 2300kv (3s-4s), :Gemfan 10A, Prop:, 2 blade 5030 Gemfan, 2 Blade 5 x 4 HQ Composite, 2 Blade 6030 HQ Composite,
CF version of the DRQ 250 is structurally the same ...ReadyMadeRC
NEMESIS 240MM FPV QUAD - CARBON FIBER
| Motors | Tiger MN 1806 2300kv (3s-4s) , |
| ESCs | 10-12A |
| Prop | 2 blade 5030 Gemfan, 2 Blade 5 x 4 HQ Composite, 2 Blade 6030 HQ Composite |
| Flight Controller | Naze32 Acro, OP CC3D |
Standard Frame features:, -Vibration free separated Clean and Dirty sections for smooth video recording, -Intelligent Electronics management: tons of options for mounting electronics including Buzzers, Strobes, leds, voltage readers, OSD, access Mobius buttons when mounted inside frame, etc, The standard frame kit includes:, -1 Top Clean Plate (1mm), Recommended Equipment:,
-Instantly fully inward fold-able quad for easy pack and go ...ReadyMadeRC
NEMESIS 240MM FPV QUAD - G10
| Motors | Tiger MN 1806 2300kv (3s-4s) , |
| ESCs | 10-12A |
| Prop | 2 blade 5030 Gemfan, 2 Blade 5 x 4 HQ Composite, 2 Blade 6030 HQ Composite |
| Flight Controller | Naze32 Acro, OP CC3D |
Standard Frame features:, -Vibration free separated Clean and Dirty sections for smooth video recording, -Intelligent Electronics management: tons of options for mounting electronics including Buzzers, Strobes, leds, voltage readers, OSD, access Mobius buttons when mounted inside frame, etc, The standard frame kit includes:, -1 Top Clean Plate (1mm), Recommended Equipment:,
-Instantly fully inward fold-able quad for easy pack and go ...ReadyMadeRC
2.3GHZ FAN (5 LOBE) PRO RHCP ANTENNA (2245-2370MHZ)
| Gain | 0.9 dbic |
| SWR | <1.2. |
ReadyMadeRC
2.4GHZ (2450-2510MHZ) FAN (5 LOBE) RHCP ANTENNA
| Gain | 0.9 dbic |
| SWR | <1.2. |
ReadyMadeRC
1.2-1.3GHZ FAN (5 LOBE) RHCP ANTENNA
| Gain | 0.9 dbic |
| SWR | <1.2. |
ReadyMadeRC
MAXI-CURE THICK CA - 8 OZ REFILL
,
Cyanoacrylates (CAs) have become the adhesive of choice for most ...ReadyMadeRC
MAXI-CURE THICK CA - 2 OZ
,
Cyanoacrylates (CAs) have become the adhesive of choice for most ...ReadyMadeRC
MAXI-CURE THICK CA - 1/2 OZ
,
Cyanoacrylates (CAs) have become the adhesive of choice for most ...ReadyMadeRC
MAXI-CURE THICK CA - 1 OZ
,
Cyanoacrylates (CAs) have become the adhesive of choice for most ...