ReadyMadeRC
RMRC 2100MAH 3S 3C LIFE TRANSMITTER PACK (FUTABA/JR) PICKUP ONLY
Capacity | 2100mAh |
Type | 3S1P / 9.9v / 3Cell |
Constant Discharge | 20C (42A) |
Peak Discharge (2 sec burst) | 40C (84A) |
Pack Size | 100 x 30 x 30mm |
Charge Plug | JST-XH |
Power Connector | Futaba Male |
Watt Hours | 23.31 |
Note:, We recommed a charge rating of 1C (2.5A) or less for this pack. Always remove battery from transmitter before charging., Pack Weight:, 5.6 oz (161g) including wires/connector,
THESE BATTERIES ARE NOT AVAILABLE FOR SHIPPING. STORE PICKUP ONLY. ...ReadyMadeRC
RMRC 2500MAH 3S 3C LIPO TRANSMITTER PACK (FUTABA/JR)
Capacity | 2500mAh |
Constant Discharge | 3C (7.5A) |
Peak Discharge (2 sec burst) | 8C (20A) |
Pack Size | 100 x 30 x 25mm |
Charge Plug | JST-XH |
Power Connector | Futaba Male |
Note:, We recommed a charge rating of 1C (2.5A) or less for this pack. Always remove battery from transmitter before charging., Type:, 3S1P / 11.1v / 3Cell, Pack Weight:, 5.3 oz (150g) including wires/connector,
Have the confidence and piece of mind that your transmitter ...Flying-Hobby
FUTABA R617FS 7 CHANNEL 2.4GHZ FASST RECEIVER
Size | 1.6 x 1.1 x .35" (40 x 27 x 9mm) |
Power Requirement | 4.8 - 6V |
Current Drain | 80mA (at no signal), 74 mA(w/ signal no servos on 4.8) |
Weight | 0.34oz (9.8g) with case, 0.25oz (7g) without case |
FEATURES:, High sensitivity receiver weighs only .25oz (7g) without case, INCLUDES:, Futaba R617FS 2.4GHz FASST 7-Channel Receiver, SPECS:,
yet is a full range system for all aircraft from ...Flying-Hobby
FUTABA R6303SBE 2.4GHZ FASST MID-RANGE MICRO RECEIVER
Futaba R6303SBE FASST 2.4GHz Micro Receiver." />
Dimensions | 0.89 x 1.47 x 0.37" (22.5 x 37.4 x 9.3mm) Weight |
FEATURES:, For use with park flight or indoor use airplanes and small electric helicopters up to 39.4" (1000mm) main rotor diameter S.BUS system output port with three conventional channel outputs Compatible with S.Bus and conventional system servos and gyros Automatic FASST 2.4GHz 7-ch mode or 8ch/10ch/Multi-channel mode recognition One year limited warranty through Hobby Services beginning at date of purchase, INCLUDES:, Futaba R6303SBE FASST 2.4GHz Micro Receiver with Instruction Sheet, REQUIRES:, Installing in aircraft and connecting battery and servos, SPECS:,
This is the Futaba R6303SBE FASST 2.4GHz Micro Receiver.Flying-Hobby
FUTABA R6303SB S.BUS 2.4GHZ HIGH SPEED MICRO RECEIVER
Futaba R6303SB 3-18 Channel FASST 2.4GHz S.Bus ..." />
Power Requirement | 3.7-7.4V, Usable voltage 3.5-8.4V Dimensions |
FEATURES:, S.Bus system output and three conventional system channel outputs allows usage with conventional servos as well as S.Bus system compatible servos and gyros When linking procedure is performed, receiver recognizes the signal mode (FASST 2.4GHz 7ch mode or 8ch/10ch/Multi Channel Mode) automatically High-speed or normal operating mode One year limited warranty through Hobby Services beginning at date of purchase, INCLUDES:, Futaba R6303SB 3-18 Channel FASST 2.4GHz S.Bus Micro Receiver and Instruction Manual, :,
This is the Futaba R6303SB 3-18 Channel FASST 2.4GHz S.Bus ...Flying-Hobby
FUTABA MAGNETIC ROTATION SENSOR FOR 18MZ TELEMETRY SYSTEM
Futaba Magnetic rotation sensor for 18MZ telemetry system This is ..." />
INCLUDES | Two screws |
SPECS | Length |
Weight | 0.16oz (4.7g) |
Voltage | DC 3.7-7.4V |
Ramge | 37 to approximately 100,000RPM |
FEATURES:, This sensor provides the RPM of a motor to the Futaba 18MZ transmitter,
Futaba Magnetic rotation sensor for 18MZ telemetry system This is ...Flying-Hobby
FUTABA SBC-1 S.BUS CHANNEL SETTING TOOL
Futaba SBC-1 S.Bus Channel Setting Tool. This ..." />
Weight | 0.28oz (7.8g) |
Operating Temperature Range | -10° to 45° C |
Specifications:, Dimensions:, 1.54 x 1.02 x 0.39" (39 x 26 x 10mm), Power Requirement:, 4 - 5 cell NiCd, NiMH, NOTE:, Do not connect anything other than a Futaba S.Bus servo or S.Bus decoder to the Channel Setting Tool. If a conventional servo is connected, the servo may operate erroneously.,
This is the Futaba SBC-1 S.Bus Channel Setting Tool. This ...Flying-Hobby
FUTABA BLS257 BRUSHLESS HELI RUDDER MINI SERVO
Futaba BLS257 Brushless Rudder Mini Digital Servo. ..." />
Torque | 36 oz-in. (2.6 kg-cm) @ 4.8V Speed |
Weight | 0.92 oz (26g) |
FEATURES:, Designed for 3D helis 30% faster response than standard digital servos and five times longer lasting than servos with brushed motors Same power consumption as brushed digital servos One year limited warranty through manufacturer beginning at date of purchase, INCLUDES:, Futaba BLS257 Brushless Heli Rudder Mini Digital Servo with universal connector,, REQUIRES:, Installing in heli, connecting linkage and connecting to receiver, SPECS:,
This is the Futaba BLS257 Brushless Rudder Mini Digital Servo. ...Flying-Hobby
FUTABA 4YF 2.4GHZ 4CH TRANSMITTER & R2004GF RECEIVER (MODE 2)
Power Requirement | 4.8V or 6V shared with servos |
Current Drain | 30mA at no signal |
Size | 1.54 x 1.02 x 0.39" (39 x 26 x 10mm) |
Weight | 0.49oz (14g) |
Standard Functions :, FHSS (Frequency Hopping Spread Spectrum) eliminates frequency pins and signal interference-pushbutton transmitter/receiver linking with no binding plugs, R2004GF Receiver Features:, :, For use with the 4YF-2.4GHz FHSS transmitter, :, Package Content:, 1 x Futaba T4FY 4ch 2.4GHz FHSS Transmitter,
********can not ship to Turkey and Belgium( as the custom ...Flying-Hobby
FUTABA R6106 HFC 2.4GHZ MID SIZE RECEIVER
Futaba R6106HFC 2.4GHz FASST 6-Channel Mid Range ..." />
FEATURES | Ideal for carbon fuselage sailplanes, and the 50" wingspan class of airplanes |
INCLUDES | Futaba R6106HFC 2.4GHz FASST 6-Channel Mid Range Receiver |
REQUIRES | Binding to transmitter, installing in model and connecting servos and battery |
SPECS | Size |
Flying-Hobby
FUTABA R6202SBW 2.4GHZ FASST DUAL S.BUS HV RECEIVER
Futaba R6202SBW 2.4GHz FASST Dual SBus Receiver." />
Dimensions | 0.89 x 1.47 x 0.37" (22.5 x 37.4 x 9.3mm) |
Weight | 0.25oz (7.2g) |
Operating Voltage | 3.7 - 7.4V |
FEATURES:, Two port S.Bus system output and conventional system channel (2, 3ch) outputs May also be used with conventional system servos and S.Bus system compatible servos and gyros Automatic signal mode recognition (FASST-2.4GHz 7ch mode or 8ch/10ch/Multi-ch-mode) Selectable operating mode, high speed or normal One year limited warranty through Hobby Services beginning at date of purchase, INCLUDES:, Futaba R6202SBW 2.4GHz FASST Dual SBus Receiver with Instructions, SPECS:,
This is the Futaba R6202SBW 2.4GHz FASST Dual SBus Receiver.BevRC
RLINK PLUG AND PLAY CABLE FOR FUTABA RADIOS WITH SQUARE TRAINER PORT
Futaba radios with square trainer ..." />
Warning:, The Futaba radio's trainer port has proven to be very weak cuuurent driven capacity, if you want long range flight, please use another power source and plug it to the HT port in the Rlink Tx module, the Tx module will choose the higher voltage source to power.,
Plug and play cable for Futaba radios with square trainer ...SDSHobby
DIY FUTABA /JR COLOR 22# 22AWG SERVO EXTENSION CABLE/ FLAT CABLE 100M/VOLUME WITHOUT CONNECTOR
Specifications:, Color:, Futaba color (D-R-W); JR color (B-R-C), Cable Length:, 100M/volume, Cable Type:, 2AWG/ 22#, Cores of Copper Wire:, 60 cores, Diameter of Copper Wire:, 0.08mm, Outer Diameter of Cable:, 1.5mm, :, SCH0809,
Recommended Connector (need to buy)SDSHobby
DIY FUTABA /JR COLOR 22# 22AWG SERVO EXTENSION CABLE/ TWISTED WIRE 1M WITHOUT CONNECTOR
Specifications:, Cable Length:, 1m, Cable Type:, 2AWG/ 22#, Cores of Copper Wire:, 60 cores, Diameter of Copper Wire:, 0.08mm, Outer Diameter of Cable:, 1.5mm, Warm Tips:, http://www.sdshobby.com/diy-futaba-jr-type-3-pin-servo-battery-connectorplug-set-female-and-male-p-11936.html,
The above price is for 1 meter. If you buy ...SDSHobby
DIY FUTABA /JR COLOR 22# 22AWG SERVO EXTENSION CABLE/ TWISTED WIRE 100M/VOLUME WITHOUT CONNECTOR
Specifications:, Color:, Futaba color (D-R-W); JR color (B-R-C), Cable Length:, 100M/volume, Cable Type:, 2AWG/ 22#, Cores of Copper Wire:, 60 cores, Diameter of Copper Wire:, 0.08mm, Outer Diameter of Cable:, 1.5mm, Warm Tips:, DIY Servo Extension Cable plug, Anode and Cathode Connector (need to buy separately), http://www.sdshobby.com/diy-futaba-jr-type-3-pin-servo-battery-connectorplug-set-female-and-male-p-11936.html,