ReadyMadeRC
PHOENIX R/C PRO SIMULATOR V5.0
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8/DX10T/DX18 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Features:, , Overview:, Whenever weather, schedules or circumstances conspire to keep you from the flying field, scratch your flying itch with the latest Phoenix Professional RC Flight Simulator, version 5.0. Stunning graphics and incredibly realistic physics have made the Phoenix simulator not only one of the best desktop flight simulators, but a virtual RC experience with just about all the benefits of an RC club and flying field. This newest version features definitively refined physics plus new companion software you can use to create your own models, fly them and then share them online. It’s always a perfect time to fly with the Phoenix Professional RC Flight Simulator., Tech Notes:, To successfully use Phoenix, you will need the following:, • IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, • An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, • Boot Camp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., supported:,
Improved airplane physics rebuilt from the ground up, plus industry-leading ...ReadyMadeRC
FEIYU TECH GIMBAL DAMPENING BALL (8PCS)
,
Feiyu Tech rubber dampening balls for gimbal mounts. These are ...ReadyMadeRC
FY-41AP-A AIRPLANE STABILIZER, AUTOPILOT, AND ON SCREEN DISPLAY
| FY-41AP firmware for fix-wing V1.22 | Download |
| FY module firmware upgrade software and manual | Download |
| The latest FY-DOS&41AP-SETTING software V1.11 for fix-wing | Download |
| FY-41AP manual for fix-wing | Read online |
| More FY-41AP related downloads | Click in |
| FY-41AP OSD display part firmware V1.22a | Download |
| FY module firmware upgrade software and manual | Download |
| Supported servo output | 50Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 6 channels |
| FY-41AP Module Working Voltage | 5.3V@0.2A( Powered by Power Manager) |
| Air speed senor | 0 ~ 200KM/h |
| Power Manager | 35g(50×24×18mm) |
| Working Voltage Range | Power of battery 7~26V (2S ~ 6S) |
| Measuring current | 0~100A |
| Power for FY-41AP module | 5.3V@2A |
| Power for Video transmission system | 12V@2A |
| Operating Temperature | -10°C ~ 50°C |
Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,
Introduction FY-41AP is an inertial attitude measurement instrument used for ...ReadyMadeRC
AIMDROIX EVO ONE - Y6
| - Frame size | 610mm (with extended length arms) |
| -Max props size | 16in on top motor / 15in props on lower motor. |
Frame configurations:, The frame was designed to be as customizable as possible so that it could be built in many different multirotor configurations. The default frame configuration is a Y6 but it can be built as a quad, quad X8, Y4, V- tail quad and tricopter. This is possible by just installing the optional configuration kits sold separately., Main Frame and landing gear:, The top and bottom plate are stiffened with an innovative aluminum beam stiffeners, which increase the stiffness of the frame plates without the need of standoffs or sandwiched plates. This maximizes the space between the top and bottom plates for a better placement of the ESC and batteries. The integrated landing gear increases the stiffness of the bottom plate and allows two high capacity batteries to be mounted on the sides of the frame. The height of the landing gear can be easily changed by replacing the 8mm carbon fiber leg tubes., Camera mounting system:, The innovative camera mounting system was designed to provide vibration isolation for the camera and video transmitter electronics. The camera plate is mounted on 6 AIMDROIX soft dampers that the takes away the vibrations from the props and motors. The rear support dampening balls are mounted on the top plate brackets so that they are in compression load. This allowed mounting the camera gimbal and FPV camera on front of the plate, away from the top and bottom props view and maintain the plate parallel with respect to the frame plates. The plate was designed to fit the Feiyu Tech FY-G3 brushless gimbal without modifications., Designed for the Aimdroix Aluminum Arms:, The frame was designed to fit the AIMDROIX aluminum arms that have been well proven for many customers around the world. With the optional AIMDROIX arms accessories, it possible to build the most versatile multirotor frame in the market., Key Features:, -Innovative vibration isolated camera system., Y6 Specs:, -Aprox frame,
Aimdroix EVO ONE Y6 The AIMDROIX EVO ONE is the ...ReadyMadeRC
AIMDROIX EVO ONE - QUAD/X8 MULTIROTOR FRAME
| - Frame Size | 615mm (with extended length arms) |
| -Max props size | 14in |
| - Battery space between plates | 220mm x 53mm x 37 m |
Frame configurations:, The frame was designed to be as customizable as possible so that it could be built in many different multirotor configurations. The default frame configuration is a Y6 but it can be built as a quad, quad X8, Y4, V- tail quad and tricopter. This is possible by just installing the optional configuration kits sold separately., Main Frame and landing gear:, The top and bottom plate are stiffened with an innovative aluminum beam stiffeners, which increase the stiffness of the frame plates without the need of standoffs or sandwiched plates. This maximizes the space between the top and bottom plates for a better placement of the ESC and batteries. The integrated landing gear increases the stiffness of the bottom plate and allows two high capacity batteries to be mounted on the sides of the frame. The height of the landing gear can be easily changed by replacing the 8mm carbon fiber leg tubes., Camera mounting system:, The innovative camera mounting system was designed to provide vibration isolation for the camera and video transmitter electronics. The camera plate is mounted on 6 AIMDROIX soft dampers that the takes away the vibrations from the props and motors. The rear support dampening balls are mounted on the top plate brackets so that they are in compression load. This allowed mounting the camera gimbal and FPV camera on front of the plate, away from the top and bottom props view and maintain the plate parallel with respect to the frame plates. The plate was designed to fit the Feiyu Tech FY-G3 brushless gimbal without modifications., Designed for the Aimdroix Aluminum Arms:, The frame was designed to fit the AIMDROIX aluminum arms that have been well proven for many customers around the world. With the optional AIMDROIX arms accessories, it possible to build the most versatile multirotor frame in the market., Key Features:, -Innovative vibration isolated camera system., QUAD Specs:,
Aimdroix EVO ONE Quad The AIMDROIX EVO ONE is the ...ReadyMadeRC
READY MADE RC 2 AXIS CAMERA GIMBAL FOR GOPRO HERO3, 3+
| Working Voltage | 7v-17v, 2-4s lipo (12v Standard) |
| Overload Protection | 0.8A |
| Overload Protection Time | 600s (After 600s, gimbal will stop working automatically) |
| Max Torque | 330us |
| Weight | 178g |
Specifications:, , Customer Video:,
Introducing the Ready Made RC 2 Axis Gimbal for GoPro ...ReadyMadeRC
DJI - 12 X 4.2 SELF TIGHTENING BLACK PROPS
,
With the state of the art areodynamic efficiency and only ...ReadyMadeRC
DJI - 12 X 4.2 SELF TIGHTENING BLACK PROPS YELLOW STRIPE
| Note | Picture shows black props. Product includes same props, but with 2 yellow stripes on the tips. |
ReadyMadeRC
RMRC ANACONDA - PNP (WITH INSTALLED MOTOR, ESC, AND SERVOS)
| Wingspan | 2,060mm |
| Wing Area | Approx. 4,900cm |
| Length | 1,410mm |
| Motor | RMRC Tiger Motor Brushless Outrunner AT3520-5, 800kv (6mm prop adapter shaft) |
| Propeller (sold separately) | Recommend |
| ESC | RMRC Tiger Motor 80A ESC with switch mode BEC (T-Plug connector) |
| Servos | 3x 30g and 2x 17g Metal Gear Digital (does not include 2x servos for flaps) |
| Recommended Flap servos | HS-81 |
| Battery | Li-Po 4s 5,000mAH - 20,000mAH (Additional nose weight needed with smaller batteries) |
| Center of Gravity | 1/3 of wing from leading edge on the main spar |
| Approximate flight duration | 45 minutes to over an hour depending on configuration |
| Fuselage dimensions (Inside) | L 66cm (26.5") x W 15cm (6") x H 8cm (3") |
Features:, , Specifications:, , RMRC's Setup for the Anaconda:, , RcGroups.com Unboxing Video with Jim Graham:, , Looking inside the fuselage:, , Notes:, , Can be broken down for transport:, Picture courtesy of ducatirdr from RCGroups.com,
Anaconda PNP - with installed Motor, ESC, and Servos After ...ReadyMadeRC
200 QX BNF WITH SAFE
| Type | Quad-Copter |
| Main Rotor Diameter | 4.45 in (113mm) |
| Length | 5.59 in (142mm) |
| Kit/ARF/RTF | BNF |
| Experience Level | Intermediate |
Is Assembly Required: No,
Features SAFE™ Technology equipped Three flight modes High performance brushless ...ReadyMadeRC
F4U-1A CORSAIR PNP
| Wingspan | 44.0 in (1120mm) |
| Overall Length | 36.0 in (915mm) |
| Motor Size | 15-size 950Kv brushless outrunner (installed) |
| Radio | 4+ channel minimum radio system required (6+ for flaps and retracts) |
| Prop Size | 9.5 x 7.5 |
| Speed Control | 30-amp Pro Switch-Mode BEC brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C Li-Po |
| Flaps | Optional |
| Retracts | Optional |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts and flaps installed,
Take to the Skies with the Famous Gull-Wing Fighter from ...ReadyMadeRC
PARKZONE - F4U-1A CORSAIR BNF PKZ6080
| Wingspan | 44.0 in (1120mm) |
| Overall Length | 36.0 in (915mm) |
| Motor Size | 15-size 950Kv brushless outrunner (installed) |
| Radio | AR600 6-channel DSMX® receiver (installed) |
| Prop Size | 9.5 x 7.5 |
| Speed Control | 30-amp Pro Switch-Mode BEC brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C Li-Po (included) |
| Flaps | Optional |
| Retracts | Optional |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Charger | 2- to 3-cell DC variable rate Li-Po charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flying Weight: 43.4 oz (1230 g) with drop tanks installed; 46.6 oz (1320 g) with tanks, retracts and flaps installed,
Take to the Skies with the Famous Gull-Wing Fighter from ...ReadyMadeRC
UMX RADIAN BNF
| Wingspan | 28.7 in (730mm) |
| Overall Length | 16.5 in (418mm) |
| Flying Weight | 1.50 oz (43 g) |
| Motor Size | 8.5mm coreless brushed motor |
| Radio | 4+ channel transmitter required |
| CG (center of gravity) | 1.22 in (31mm) back from the leading edge of wing at wing root |
| Recommended Battery | 1S 3.7V 150mAh 25C LiPo |
| Approx. Flying Duration | 8-10 minutes |
| Charger | 1S 300mA LiPo USB Charger |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Indoor/Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
® technology gives a pilot the feeling of flying a much larger glider especially outdoors because of its renowned ability to smooth out the effects of wind and turbulence. Its distinctively curved wing delivers outstanding lift and impressive glide ratio using 3-channel control simplicity. The lightweight brushed power system requires just a single-cell Li-Po battery to provide excellent launch performance and long flight times. Plus the one-piece wing can be easily removed and stored in the handle-equipped box making your ability to soar through the clouds as convenient as can be. You’ll be in the air in no time thanks to great features like:, , Flaps: No,
The first ultra micro motor glider with AS3X® technology. Features ...ReadyMadeRC
CARBON-Z CUB BNF BASIC
| Wingspan | 84.6 in (215 cm) |
| Overall Length | 55.8 in (142 cm) |
| Wing Area | 1100 sq. in. (71.0 sq. dm.) |
| Flying Weight | 8.15 lb (3.70 kg) |
| Motor Size | 50-size brushless outrunner (installed) |
| Radio | 6+ channel DSM2/DSMX transmitter (required) |
| Servos | (4) 26-gram MG mini servos, (2) 13-gram micro servos (installed) |
| CG (center of gravity) | 4.72 in (120mm) back from leading edge of wing |
| Wing Loading | 17 oz/sq ft |
| Prop Size | 15 x 5.5 Electric (included) |
| Speed Control | 60-amp brushless (installed) |
| Recommended Battery | 22.2V 6S 3200mAh LiPo (required) |
| Flaps | Yes |
| Approx. Flying Duration | 7 minutes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
| Spinner Size | 2.64 in (67mm) |
Optional Accessories:, - Float set (EFL1045016), Retracts: No,
Features Easy-to-complete final assembly Quique Somenzini design and attention to ...ReadyMadeRC
PARKZONE ARCHER BNF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | AR400 4-channel receiver (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...