GetFPV
QAV400 "DIRTY FRAME" PLATE
This is the 'dirty frame' plate for the QAV400 FPV Quadcopter Frame. It holds the motor arms and ESCs. This plate does not have any power soldering pads. Weight: 36 grams,
DetailsGetFPV
QAV400 "CLEAN FRAME" BASE PLATE
| This is the base plate of the "clean frame" part of the QAV400 FPV quadcopter frame. Weight | 44g |
GetFPV
QAV500 FLIGHT CONTROLLER COVER PLATE
| This is a flight controller cover plate for the QAV500 FPV Quadcopter frame. Weight | 41g |
GetFPV
QAV500 "DIRTY FRAME" PLATE
This is the 'dirty frame' plate for the QAV500 FPV Quadcopter Frame. It holds the motor arms and ESCs. This plate does not have any power soldering pads. Weight: 50g,
DetailsGetFPV
QAV500 FPV QUADCOPTER FRAME V1.2
| NOTE | Landing Gear not included! |
GetFPV
TEAM BLACKSHEEP 69 FPV CAMERA
,
Details The top end camera from Team BlackSheep. Super high ...GetFPV
2.4GHZ 1000MW A/V TRANSMITTER
| Weight | 89g with case and antenna |
| Sea Level Transmission Range | 1000-3000m |
| Channel 0 | 2430MHz |
| Channel 1 | 2450MHz |
| Channel 2 | 2470MHz |
| Channel 3 | 2490MHz |
| Channel 4 | 2510MHz |
| Channel 5 | 2390MHz |
| Channel 6 | 2370MHz |
| Channel 7 | 2350MHz |
| Channel 8 | 2330MHz |
| Channel 9 | 2010MHz |
| Channel H | 2290MHz |
| Channel C | 2410MHz |
GetFPV
FPVMANUALS 30 AMP ESC WITH SIMONK FIRMWARE
| Max continuous load | ~23 amps |
| BEC | 5v/3amps max |
| Lipo Cells | 2 to 4 cells |
Simon had this to say about the new fpvmanuals SimonK ESCs:, These ESCs are a revision of the nearly-perfect F-30A ESCs with high quality board layout and components.,
Details Jointly developed with SimonK himself, this is fpvmanuals' rendition ...GetFPV
FPVMANUALS 30 AMP ESC "F-30"
| Max continuous load | 23 amps |
| BEC | 5v/3amps max |
| Lipo Cells | 2 to 4 cells |
GetFPV
FATSHARK XT60 STYLE CHARGE/DISCHARGE ADAPTER
,
Details 2.1mm barrel to XT60 style adapter for FatShark batteries. ...GetFPV
2.4GHZ A/V RECEIVER
| Channel 0 | 2430MHz |
| Channel 1 | 2450MHz |
| Channel 2 | 2470MHz |
| Channel 3 | 2490MHz |
| Channel 4 | 2510MHz |
| Channel 5 | 2390MHz |
| Channel 6 | 2370MHz |
| Channel 7 | 2350MHz |
| Channel 8 | 2330MHz |
| Channel 9 | 2010MHz |
| Channel H | 2290MHz |
| Channel C | 2410MHz |
| Channel A | 2305MHz |
GetFPV
TIGER MOTOR MN-4012+4014 SERIES BEARINGS
,
Details Tiger Motor upper and lower replacement bearings for the ...GetFPV
TIGER MOTOR M6 CW PROP ADAPTER NUT
,
Details One 6mm Clockwise Thread Nut/Prop Adapter for larger MT ...GetFPV
TIGER MOTOR M6 CCW PROP ADAPTER NUT
,
Details One 6mm Counter Clockwise Thread Nut/Prop Adapter for MT ...