HiModel
35MHZ CORONA 6CH FM DUAL CONVERSION DSP FUTABA & JR COMPATIBLE RECEIVER RS620Ⅱ
| Compatibility | SAWAN , HITEC ,JR , FUTABA & WFLY etc. |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Size 1.1”x0.6”x0.3”(28x15x7.6mm), Weight 0.17oz/4.7g(with shrink wrap), Sensitivity better than 2.0μV, Selectivity ±8kHz at 65dB down, Number of channels 1‐6, Filtering Dual turned RF circuitry, Filtering Dual 4 pole ceramic filter, Filtering DSP filtering with mild algorithm, Modulate FM/PPM, Shift polarity Positive or Negative (auto‐detect), Case Shrink wrap, Operating Voltage 4.8V~6.0VDC, Operating Current 11mA., , ,
Features: RD620II receiver – a small and light receiver with ...HiModel
40MHZ CORONA 6CH FM DUAL CONVERSION DSP FUTABA & JR COMPATIBLE RECEIVER RS620Ⅱ
| Compatibility | SAWAN , HITEC ,JR , FUTABA & WFLY etc. |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Size 1.1”x0.6”x0.3”(28x15x7.6mm), Weight 0.17oz/4.7g(with shrink wrap), Sensitivity better than 2.0μV, Selectivity ±8kHz at 65dB down, Number of channels 1‐6, Filtering Dual turned RF circuitry, Filtering Dual 4 pole ceramic filter, Filtering DSP filtering with mild algorithm, Modulate FM/PPM, Shift polarity Positive or Negative (auto‐detect), Case Shrink wrap, Operating Voltage 4.8V~6.0VDC, Operating Current 11mA., , ,
Features: RD620II receiver – a small and light receiver with ...HiModel
72MHZ CORONA 6CH FM DUAL CONVERSION DSP FUTABA & JR COMPATIBLE RECEIVER RS620Ⅱ
| Compatibility | SAWAN , HITEC ,JR , FUTABA & WFLY etc. |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Size 1.1”x0.6”x0.3”(28x15x7.6mm), Weight 0.17oz/4.7g(with shrink wrap), Sensitivity better than 2.0μV, Selectivity ±8kHz at 65dB down, Number of channels 1‐6, Filtering Dual turned RF circuitry, Filtering Dual 4 pole ceramic filter, Filtering DSP filtering with mild algorithm, Modulate FM/PPM, Shift polarity Positive or Negative (auto‐detect), Case Shrink wrap, Operating Voltage 4.8V~6.0VDC, Operating Current 11mA., , ,
Features: RD620II receiver – a small and light receiver with ...3 Reviews
HiModel
2.5G MICRO SERVO W/FUTABA,JR CONNECTOR
| ●Dimensions | 21x8.2x23 mm |
| ●Weight | 2.5g / 0.13oz (excluding wire and connector) |
| ●Operating Speed (4.8V no load) | 0.1sec/60 degrees |
| ●Stall Torque (4.8V) | 0.8 kg/cm |
| ●Connector lead length | 15cm |
| ●Connector type | Futaba and JR compatible |
| ●Operating Voltage | 4.8-6.0 Volts |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes:1 x servo 1 x servo horn set4 Reviews
HiModel
SERVO HORN SET FOR STANDARD JR SERVOS 23 TEETH
, , , , , , Specifications:, , , , , , , , , , , Servo hornsset for JR standard servos, , ,
Includes/Requires: Includes:6 x single arms 2 x double armsHiModel
SERVO CONNECTOR SAFETY LOCK/CLIP (10PCS) JR E0023J
, , , , , , Specifications:, , , , , , , , , , , Servo Connector Safety Lock/Clip JR E0023J, 10pcs in different color., , ,
Features: Clip for servo connector or extension lead joint, to ...HiModel
KDS MODEL 2.4G JR COMPATIBLE RF MODULE & RECEIVERS COMBO KDS-8XTJ
Features:, , Includes/Requires:, , Includes:, 1 x RF module, JR compatible,
● Fully intelligent design, plug and play. ● No need ...HiModel
H TYPE SUPPORT FOR JR TRANSMITTERS (PLASTIC)
Features:,
H Type Support for JR Transmitters1 Reviews
HiModel
ALUMINUM H-SHAPE SUPPORT FOR FUTABA/JR TRANSMITTERS
Features:,
Aluminum anodized H-Shape Support for Futaba/JR Transmitters Suit for Futaba ...HiModel
NECK STRAP FOR JR TRANSMITTER
| Includes | 1 x neck strap |
Features:, , Includes/Requires:, ,
Neck strap for JR transmitter. * color may slightly different ...HiModel
40MHZ JR SPCM 10CH AUTO SCAN PLL-SYNTHESIZED DUAL CONVERSION RECEIVER RS10DS
| Type | RS10DS Auto scan |
| Band | 40Mhz |
| ●Type FM | 10-channel/double conversion new ABC & W circuitry |
| ●Channel availability | 77 (40.770), 79 (40.790), 81 (40.810), 83 (40.830), 85 (40.850). |
| ●Sensitivity | 5uV/m |
| ●Selectivity | 8Khz/50dB |
| ●Channel Selection | Auto search system |
| ●Weight | 32g |
| ●Size | 16x38x53mm |
, , , , , , Specifications:, , , , , , , , , , , ●Dual conversion, ●Available for PCM transmitter (SPCM mode), , ,
Features: This is genuine JR SPCM 10CH Auto Scan PLL-Synthesized ...HiModel
FRSKY 2.4G JR COMPATIBLE RF MODULE (TWO-WAY) & RECEIVER COMBO DJT/V8FR-HV
| Operating Voltage Range | 4.8V-6V |
| Operating Current | 30mA |
| Specified Range | 1.2km |
| Resolution | 10bit |
| Latency | 22ms |
| Number of Channels | 8CH |
| Dimensions | 60×37×21 mm |
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 50mA |
| Output Power | 60mW |
| Resolution | 10bit |
| Dimensions | 63.9X48.5X36.5mm (V8JT); |
, , , , , , Specifications:, , , , , , , , , , , Receiver specifications:, Transmitter module specifications:, , ,
Features: * The RF module of this combo was upgraded ...3 Reviews
HiModel
2.4G X8J JR COMPATIBLE RF MODULE
| Size | 60 X 44 X 22mm (2.36 X 1.73 X 0.87 inch) |
| Antenna | 2dBi |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Compatible with JR radios include: 347,388,783,U8,PCM10,PCM10S,PCM10SX,PCM10IIs,8103,9303,MX-22,MX-24s CE, FC & ...1 Reviews
HiModel
2.4G CORONA DSSS 8-CHANNEL RF MODULE & RX SYSTEM FOR JR TRANSMITTER (RF CT8J, RX CR8D) V2
| Type | CT8J 2.4G DSSS |
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 100Ma |
| Resolution | 10bit |
, , , , , , Specifications:, , , , , , , , , , , Specification For Transmitter Module, Specification for Receiver, CR8D---- Fast Spread 2.4G Receiver work with Corona RF.Module, Operating Voltage Range --- 4.8V-6V, Operating Current --- 30Ma, Specified Range --- 1.5km, Resolution ---10 bit, Latency ---- 22ms, Sensitivity -- -100dbm, Channel --- 8CH, , ,
Features: When you plan to update your JR FM Transmitter ...2 Reviews
HiModel
2.4G 4-CHANNEL MICROLITE DSM2 /DSMX RECEIVER 410JST (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 4-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, ◆ 1.25Pitch JST servo connectors, Binding Procedure, 1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 4 channels ◆ Preset failsafe system ...