HiModel
POWERHD 17.5G/2.0KG/ .05 SEC HIGH SPEED METAL GEAR SERVO HD-1705MG
| ☆Weight | 17.5g |
| ☆Dimension | 29.5 x 11.6 x 30.2mm |
| ☆Supply voltage | 6.0V |
| ☆Stall Torque | 2.0kg.cm |
| ☆no load running Speed | 0.05sec/60° |
| ☆Storage Temperature | -15℃~55℃ |
| ☆Dead band width | ≤4us |
, , , , , , Specifications:, , , , , , , , , , , Analog Servo—HD-1705MG, Function of Performance：, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn setHiModel
HIMODEL 9G/ 1.8KG/ .08 SEC MICRO DIGITAL SERVO HI-09D
| Type | HI-09D |
| Weight | 9 grams |
| Torque | 1.8 (kg.cm, VCC=4.8V)/ 2.0kg at 6.0V |
| Speed | 0.08 (sec/60°) |
| Voltage | DC 4.8V to 6V |
| Dimension | 23×12.5×30 mm / 0.91 x 0.49 x 1.18in |
| Wire length | 180mm |
, , , , , , Specifications:, , , , , , , , , , , *This servo is in industry pack and without labels., , ,
Features: Low cost yet with high performance, very high in ...HiModel
XQ-POWER 56G/ 17.5KG/ .12 SEC TITANIUM GEAR DIGITAL SERVO S4016D
| Type | XQ-S4016D |
| Weight | 56 grams |
| Torque | 15.5 (kg.cm, VCC=6.0V); 17.5(kg.cm, VCC=7.2V) |
| Speed | 0.14 (sec/60°) at 6.0V; 0.12(sec/60°) at 7.2V |
| Voltage | 6.0V/ 7.2V (Voltage can not higher than 7.2V, 2S Lipo is NOT supported) |
| Dimension | 40.1x 20.1 x 36.8 mm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Digital servos features:Titanium Gear; Waterproof; Plastic case, resist heat ...HiModel
XQ-POWER 56G/ 30.8KG/ .13 SEC TITANIUM GEAR DIGITAL SERVO S4230D 9.6-11.1V
| Type | XQ-S4230D |
| Weight | 56 grams |
| Torque | 24.5 (kg.cm, VCC=9.6V); 30.8(kg.cm, VCC=11.1V) |
| Speed | 0.15 (sec/60°) at 9.6V; 0.13(sec/60°) at 11.1V |
| Voltage | 9.6V/ 11.1V |
| Dimension | 40x 20 x 39 mm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Support high voltage; Titanium Gear; Waterproof; Plastic case, resist ...HiModel
XQ-POWER 177.5G/ 60KG/ .18 SEC TITANIUM GEAR HIGH TORQUE DIGITAL SERVO XQ-S5650D
| Type | XQ-S5650D |
| Weight | 177.5 grams |
| Wire length | 300mm ± 5mm |
| - Idle current | 4.8mA |
| - Non-load speed | 0.20 sec/60° |
| - Working current | 320mA |
| - Torque | 48kg.cm |
| - Locked-rotor current | 2500mA |
| - Idle current | 5mA |
| - Non-load speed | 0.18 sec/60° |
| - Working current | 370mA |
| - Torque | 60kg.cm |
| - Locked-rotor current | 3000mA |
, , , , , , Specifications:, , , , , , , , , , , Ball bearing: 2, 7.2V:, 8.4V:, , ,
Features: 60kg large metal gear digital servo, for large scale ...HiModel
PROGRAMMING USB INTERFACE FOR FEETECH PROGRAMMABLE SERVO FE-SCPC-1
, , , , , , Specifications:, , , , , , , , , , , Required Optional Parts (Sold Separately), - “Y” cable or USB extension cable, - One 4.8V or 6V “receiver” battery*., *The SCPC-1 requires an external power source in order to test/program a servo., WARNING: Be sure to use a fully-charged battery to prevent any data loss or damage during the programming process, Basic Set–Up Instructions, 1., SCPC-1 program software(ServoPC), Download the . The SCPC-1 software is compatible with Windows XP and VISTA., 2. Plug the SCPC-1’s USB interface into your PC., 3. Start the ServoPC software from your PC., 4. Plug an external power source pack (4.8V or 6V battery) into the SCPC-1 ‘-+-’ slot., 5. A servo must be plugged into slot “S” in order to program or to test. The SCPC-1 supports only program one servo at a time., Start the ServoPC software, Into TEST MODE, Into PROGRAM MODE, , ,
Features: Using this USB interface to program FT programmable servo ...HiModel
FITEC 56G/ 12.5KG/ .12 SEC TITANIUM GEAR DIGITAL SERVO FS5513M
| Dimension | 40.2 x20.0 x38.6mm |
| Weight | 56g (1.46oz) |
| Speed | 0.14sec/60°（4.8V） |
| Torque | 10.5kg.cm/146.7 oz.in（4.8V） |
| Working voltage | 4.8-6V |
| Dead band width（usec） | 2usec |
| Connector type | JR/Futaba compatible |
| Wire length | 30cm |
| Application | airplane, car, boat |
, , , , , , Specifications:, , , , , , , , , , , SPECIFICATION：, .12sec/60°（6V）, 12.5kg.cm/173.6 oz.in（6V）, , ,
Features: - Titanium gear - Dual ball bearings. - Coreless ...HiModel
28G/ 6.3KG/ .11 SEC METAL GEAR DIGITAL SERVO MD-752
| Size（mm） | 35.0 x 15 x 29.2mm |
, , , , , , Specifications:, , , , , , , , , , , Specifications：, Operating voltage range（V） 4.5～6.0V, Operating temperature range（℃） -20～60, Operating speed 0.13 sec/60°（sec/60° 4.8V）, 0.11 sec/60°（sec/60° 6.0V）, Torque 5.1 Kg·cm（Kg·cm 4.8V）, 6.3 Kg·cm（Kg·cm 6.0V）, Dead band width（usec） ≤3usec, Midpoint pulse 1520us broadband, Maximum rotation angle ±65°, Motor Five-poles coreless cup, Potentiometer imported from Japan, Weight（g） 28g, Gear 6 Metal Gears, Connecting wire length（cm） 21cm, , ,
Features: Features： Use metal gears of high intensity and accuracy, ...HiModel
HITEC 77G/ 44KG / .17 SEC DIGITAL MEGA TORQUE HV MAGNETIC ENCODER SERVO HS-M7990TH
| Motor Type | Coreless |
| Bearing Type | Dual Ball Bearing |
| Speed (6.0V/7.4V) | 0.20 / 0.17 |
| Torque oz./in. (6.0V/7.4V) | 500 / 611 |
| Torque kg./cm. (6.0V/7.4V) | 36 / 44 |
| Size in Inches | 1.72 x 0.88 x 1.57 |
| Size in Millimeters | 44 x 22 x 40 |
| Weight oz. | 2.73 |
| Weight g. | 76.5 |
, , , , , , Specifications:, , , , , , , , , , , Applications:, - Aircraft 20-120 class, - All EP 600-700 & GP 30-90 class helicopters, - GP & Gasoline boats and cars, , ,
Features: Hitec's most technologically advanced servo, the "Monster Torque" HS-M7990TH ...HiModel
XQ-POWER 8G/1.3KG/ .11SEC MICRO SERVO XQ-S0008S
| Speed | 0.12 sec/60° @ 4.8V; 0.11 sec/60° @ 6V |
| Torque | 1.2kg-cm @ 4.8V; 1.3kg-cm @ 6V |
| Weight | 8g / 0.21oz |
| Power Supply | 4.8V/ 6V |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Dimension (mm): A: 22.8, B: 11.6, C: 20.6, D: 28.5, E: -, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn setHiModel
POWERHD 3.7G/0.4KG/ .10SEC HIGH PERFORMANCE MICRO SERVO HD-1370A
| Speed | 0.10 sec/60° @ 6V |
| Torque | 0.4kg-cm @ 6V |
| Dimensions | 20 x 17.6 x 8 mm |
| Weight | 3.7g |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Power Supply: 6V, , ,
Features: The is the new Power HD high performance analog ...2 Reviews
HiModel
FITEC STANDARD 16.9KG.CM HV PROGRAMMABLE DIGITAL METAL GEARS SERVO FI7617M
| -Operating Voltage | 2-cell Li-Po power |
| -Dead band width | 2usc |
| -Interface | (like JR) |
| -Wire length | 30cm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: -Standard digital Titanium gears servo、2BB -Coreless motor、Aluminium middle hull ...HiModel
POWER HD 15.8G/ 4.6KG-CM TORQUE HALF METAL DIGITAL SERVO HD-2213MG
, , , , , , Specifications:, , , , , , , , , , , Item, , Gear, Type, , Type, , Dimension(mm), , Speed(sec/60°)@6.0 Voltage, , Torque(Kg-cm), @6.0 Voltage, , Weight, (g), , 1, , Metal, , HD-9150MG, , 40.7*20*42.4, , 0.18, , 16.0, , 61.0, , 2, , Metal, , HD-9110MG, , 40.7*20*39.4, , 0.19, , 10.5, , 49.0, , 3, , Half Metal, , HD-7150MG, , 40.7*20*39.4, , 0.14, , 7.20, , 49.0, , 4, , Plastic, , HD-5680BB, , 40.7*20*39.4, , 0.14, , 6.50, , 42.0, , 5, , Plastic, , HD-4180BB, , 40.7*20*37.0, , 0.17, , 4.10, , 41.0, , 6, , Half Metal, , HD-2213MG, , 22.8*12*29.4, , 0.16, , 4.60, , 15.8, , 7, , Half Metal, , HD-1810MG, , 22.8*12*29.4, , 0.13, , 3.90, , 15.8, , 8, , Half Metal, , HD-1581HB, , 22.8*12*25.4, , 0.16, , 2.60, , 12.3, , 9, , Half Metal, , HD-2216MG, , 22.8*12*29.4, , 0.13, , 3.90, , 15.8, , 10, , Half Metal, , HD-2216HB, , 22.8*12*25.4, , 0.09, , 1.60, , 13.6, , 11, , Metal, , HD-9660MG, , 40.3*20*37.2, , 0.16, , 20.0, , 52.4, , 12, , Plastic, , HD-3688HB, , 35.0*15*29.2, , 0.11, , 4.60, , 26.0, , , ,
Includes/Requires: Includes: 1 x digital servo with servo hornsHiModel
CORONA 22G/ 4.6KG/ .14 SEC METAL GEAR SERVO CS-238MG
| Type | CS238MG |
| Size | 29x13x30mm(1.14"x0.51"x1.18") |
| Weight | 22g(0.77OZ) |
| Operating voltage | 4.8V / 6.0V |
| Operating current | 300mA / 400mA |
| Operateing speed | 0.15sec.60º/ 0.14sec.60º |
| Stall torque | 4kg.cm / 4.6kg.cm |
| Dead band | ≤5uSec |
| Operating speed | 40º/one side pulse traveling 400us |
| Potentiometer | 3 slider/Indirect Drive |
| Ball bearing | MR106 |
| Gear Material | Metal |
| Connector wire length | 215mm |
| Temperature | -20 ℃ to +60℃ |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes: 1 x servo with servo hornsHiModel
27G/3.5KG/ .12SEC METAL GEAR SERVO S0270M
| Speed | 0.14 sec/60° @ 4.8V; 0.12 sec/60° @ 6V |
| Torque | 3.0kg-cm @ 4.8V; 3.5kg-cm @ 6V |
| Weight | 27g / 0.70oz |
| Power Supply | 4.8V/ 6V |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Dimension (mm): A: 31.2, B: 16.3, C: 29.5, D: -, E: -, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn set