LowPriceRC
SANWA SERVO HARDWARE PACKAGE
,
1603 Sanwa Servo Hardware Package Model Number: SAN-HARDWARELowPriceRC
SANWA SX-112 HIGH TORQUE STANDARD SERVO
| Speed | 0.14sec/60° (6V) |
| Torque | 4.0kg.cm (6V) |
| Size | 20x39x36mm |
| Weight | 45g |
Rating:,
LowPriceRC
*YTF 2.4GHZ 6-CHANNEL RC SYSTEM MODE 2
| Features | * 2.4GHz |
| * Power | 9.6-12V |
| * Size | 41x26x15mm |
| * Weight | 12g |
Package including:, * 1 pc of 6CH 2.4GHz Transmittor, Features:, * 9 Ch 2.4G Receiver,
YTF 2.4Ghz 6-Channel RC System is a simple radio control ...LowPriceRC
SANWA SRM-102 SERVO
| Dimensions | 39 x 20 x 36mm |
| Torque | 3.0Kg/cm (4.8V) |
| Speed | 0.2sec/60° (4.8V) |
| Weight | 45g |
LowPriceRC
SANWA RX-61H FH3 6CH LIGHT WEIGTH INDOOR RECEIVER FOR SD-10G
| • Frequency | 2.4GHz FH3 |
| • Nominal Input Voltage | 4.8v ~ 6.0v |
| • Range | Approximately 600m (2,000ft) |
| • Dimensions (in) | 1.58 x 0.72 x 0.4 |
| • Dimensions (mm) | 40.2 x 18.4 x 10.4 |
| • Fail Safe Support | Yes |
• Weight:, • 0.16oz (4.6gr) with Case,
The RX-61H is an extremely small, lightweight, middle-range receiver designed ...LowPriceRC
SANWA RX-60 FHSS-1 6CH 2.4G PARK FLYER
| Length | 1.58" (40.5mm) |
| Width | .72" (18.5mm) |
| Height | .43" (11mm) |
| Weight WITH antenna and case | .21 oz (6g) |
| Without case, with antenna | .16oz (4g) |
| Input Voltage | Nominal 4.8 to 6.0V |
| Range | approx |
Specifications:, ,
This is the Sanwa RX60 2.4 Ghz FHSS-1 6-Channel Park ...LowPriceRC
SANWA USB ADOPTER FOR SD-10G
| NOTE | Software can be downloaded separately at manufacturer's web |
Description:, This is an Sanwa/Airtronics SD-10G USB Adapter. The Airtronics SD-10G USB adapter allows you to sync your SD-10G transmitter with your PC. This gives you the ability to save and retrieve your SD-10G's model programming to and from your PC, in addition to downloading any SD-10G firmware updates that might be available., Features:, Includes USB Adapter Cable,
The SD-10G USB Adapter is simple to use. Just install ...