HobbyKing
JR DS8921HV ULTRA HIGH TORQUE DIGITAL SERVO WITH METAL GEARS AND HEATSINK
| Torque | 36.5Kg.cm (7.4v) |
| Speed | 0.13s/60° (7.4v) |
| Weight | 72g |
| Voltage | 6~8.5v |
| Dimensions | 38 x 21 x 40.5mm |
Specs:, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The DS8921HV is part of JR’s range of high voltage ...HobbyKing
JR MPH83TWV LINEAR HALL SENSING WIDE VOLTAGE BRUSHLESS SERVO WITH METAL GEARS AND HEATSINK
| Weight | 73g |
| Voltage | 4.5~8.5v |
| Dimensions | 39 x 21 x 40.5mm |
Specs:, Torque:, 26.3(4.8V)/40.6(7.4V)kg.cm, Speed:, 0.19(4.8V)/0.13(7.4V)sec/60°, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The MPH83TWV is a very impressive servo, extreme torque and ...HobbyKing
JR DS6301 HIGH TORQUE DIGITAL SERVO WITH METAL GEARS AND CASE
| Torque | 33.0Kg.cm |
| Speed | 0.17s/60° |
| Weight | 80g |
| Voltage | 4.8v |
| Dimensions | 38.5 x 21 x 40.5mm |
Please note:, The DS6301 can only be used at 4.8v., Specs:, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
JR Engineers have pushed the boundaries of R/C servo design. ...HobbyKing
JR DS6315HV HIGH TORQUE HIGH SPEED DIGITAL SERVO WITH METAL GEARS AND HEATSINK
| Torque | 17.8Kg.cm (7.4v) |
| Speed | 0.07s/60° (7.4v) |
| Weight | 80g |
| Voltage | 6~8.5v |
| Dimensions | 38 x 21 x 40.5mm |
Specs:, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The DS6315HV is part of JR’s range of high voltage ...HobbyKing
JR MP82TWV WIDE VOLTAGE ULTRA HIGH TORQUE BRUSHLESS SERVO WITH METAL GEARS AND HEATSINK
| Weight | 72g |
| Voltage | 4.5~8.5v |
| Dimensions | 39 x 21 x 40.5mm |
Specs:, Torque:, 26.3 Kg.cm (4.8V) / 40.6 Kg.cm (7.4V), Speed:, 0.19s/60° (4.8V) / 0.13s/60° (7.4V), About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The MP82TWV has been designed for use with aerobatic aircraft ...HobbyKing
JR MP82SWV WIDE VOLTAGE HIGH SPEED BRUSHLESS SERVO WITH METAL GEARS AND HEATSINK
| Weight | 72g |
| Voltage | 4.5~8.5v |
| Dimensions | 39 x 21 x 40.5mm |
Specs:, Torque:, 12.8 Kg.cm (4.8V) / 19.8 Kg.cm (7.4V), Speed:, 0.09s/60° (4.8V) / 0.06s/60° (7.4V), About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The MP82SWV has been designed for use with aerobatic aircraft ...HobbyKing
GWS NARO SUPER 19G DIGITAL SERVO/JR & GYRO
| Model | Naro Super D/JR |
| Voltage | 4.8v~6.0v |
| Speed | .077sec |
| Torque | 3.6kg/cm |
| Weight | 19g |
| Input Voltage | 4.8V~6.0 V |
| Current Consumption | 10mA |
| Operation Temp | -5~60C |
Dimension:, 26.0x27.0x11.3 mm (1.02x1.06x0.45 in ), Weight:, 7.0 g (0.285oz) with Plastic Case, Gain Adjustment:, Single rate, non-remote, Applicable R/C System:, Futaba, JR,Hi-tec, Sanwa / Airtronics,Multiplex, GWS,
GWS Naro Super 19g Digital Servo GWS Piezo Gyro PG-035 Reviews
HobbyKing
JR DS8911 HIGH TORQUE DIGITAL SERVO WITH METAL GEARS AND HEATSINK
| Torque | 25.0Kg.cm |
| Speed | 0.19s/60° |
| Weight | 69g |
| Voltage | 4.8v |
| Dimensions | 38 x 21 x 40.5mm |
: The DS8911 can only be used at 4.8v., Specs:, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
Suitable for use in large 3D and precision aerobatic models, ...HobbyKing
JR DS8915 HIGH TORQUE DIGITAL SERVO WITH METAL GEARS AND HEATSINK
| Torque | 12.0Kg.cm |
| Speed | 0.09s/60° |
| Weight | 69g |
| Voltage | 4.8v |
| Dimensions | 38 x 21 x 40.5mm |
: The DS8915 can only be used at 4.8v., Specs:, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
Ideal for use on F3A aerobatic models where speed and ...HobbyKing
NARO MAX-BB SERVO W/ JR PLUG 14G/.15SEC/1.8KG
| Weight | 14g / .49oz |
| Speed | .15sec 60Deg |
| Torque | 1.80kg-cm / 25 oz-in |
5 Reviews
HobbyKing
CNC V3-JR 1.25(#4-40) GOLD
| Material | aluminium 6061-T6 (anodized) |
| Length | 1.25inch |
weight: 5g,
CNC V3-JR 1.25(#4-40) Gold Fixing screw bolt is #4-40 #4-40 ...2 Reviews
HobbyKing
CNC ALLOY SERVO ARM LONG (JR)
Specifications:, Weight:5g, : 52mm x 8mm (at tip) x 4mm (at tip),
CNC Machined Alloy servo arm for JR splines, holes are ...5 Reviews
HobbyKing
CNC ALLOY SERVO ARM SHORT (JR)
Specifications:, Weight:4g, Dimensions:, 35mm x 7mm (at tip) x 6mm (at tip),
CNC Machined Alloy servo arm for JR splines, holes are ...5 Reviews
HobbyKing
CNC ALLOY DOUBLE SERVO ARM X-LONG (JR)
| Weight | 10g |
Specifications:, : 108mm x 8mm (at tips) x 4mm (at tips),
CNC Machined Alloy double servo arm for JR splines, holes ...5 Reviews