HobbyKing
GWS NARO SUPER 19G DIGITAL SERVO/JR & GYRO
Model | Naro Super D/JR |
Voltage | 4.8v~6.0v |
Speed | .077sec |
Torque | 3.6kg/cm |
Weight | 19g |
Input Voltage | 4.8V~6.0 V |
Current Consumption | 10mA |
Operation Temp | -5~60C |
Dimension:, 26.0x27.0x11.3 mm (1.02x1.06x0.45 in ), Weight:, 7.0 g (0.285oz) with Plastic Case, Gain Adjustment:, Single rate, non-remote, Applicable R/C System:, Futaba, JR,Hi-tec, Sanwa / Airtronics,Multiplex, GWS,
GWS Naro Super 19g Digital Servo GWS Piezo Gyro PG-035 Reviews
SDSHobby
A123 LI-FE BATTERY 6.4V 2300MAH 30C FOR RC MODEL AIRPLANES WITH FUTABA/JR PLUG FOR RECEIVER
Voltage | 6.4V |
Capacity | 2300 mAh |
Max Charging Current | 5C /11.5A |
Max Continuous Discharging Current | 30C/69A |
Max Burst Discharging Current | 60C /138A |
Weight | 162g |
Connector Type | Futaba/JR Plug and Balance Chargeable Plug |
Battery Size | L71*H26.5*W52.5mm |
Wire Length | 62mm/136mm |
Application | RC Airplanes |
Specifications:,
SDSHobby
MAX FORCE 2000MAH/ 11.1V LI-PO BATTERIES FOR JR, FF9, EX10 ETC. TRANSMITTER
Max Charging Current | 5C/10A |
Size | L111*W25*H22 mm |
Net Weight | 180g |
Plug Types | JR&FUTABA Plug |
Application | JR, FF9, EX10 etc. transmitter |
Specifications:,
ï1⁄4‹ Balance Chargeable PlugSDSHobby
DYNAM 6 CH RECEIVER 35MHZ JR
Channel | 6 CH |
Frequency | 35MHz |
Certificate | CE, FCC |
Specifications:, Type: FM, Connector Type: JR,
This 6 Channel receiver is perfect for Collective Pitch flight. ...SDSHobby
DYNAM 6 CH RECEIVER 72MHZ JR
Channel | 6 CH |
Frequency | 72MHz |
Certificate | CE, FCC |
Specifications:, Type: FM, Connector Type: JR,
This 6 Channel receiver is perfect for Collective Pitch flight. ...HobbyKing
JR DS8911 HIGH TORQUE DIGITAL SERVO WITH METAL GEARS AND HEATSINK
Torque | 25.0Kg.cm |
Speed | 0.19s/60° |
Weight | 69g |
Voltage | 4.8v |
Dimensions | 38 x 21 x 40.5mm |
: The DS8911 can only be used at 4.8v., Specs:, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
Suitable for use in large 3D and precision aerobatic models, ...HobbyKing
JR DS8915 HIGH TORQUE DIGITAL SERVO WITH METAL GEARS AND HEATSINK
Torque | 12.0Kg.cm |
Speed | 0.09s/60° |
Weight | 69g |
Voltage | 4.8v |
Dimensions | 38 x 21 x 40.5mm |
: The DS8915 can only be used at 4.8v., Specs:, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
Ideal for use on F3A aerobatic models where speed and ...HobbyKing
NARO MAX-BB SERVO W/ JR PLUG 14G/.15SEC/1.8KG
Weight | 14g / .49oz |
Speed | .15sec 60Deg |
Torque | 1.80kg-cm / 25 oz-in |
5 Reviews
HobbyKing
CNC V3-JR 1.25(#4-40) GOLD
Material | aluminium 6061-T6 (anodized) |
Length | 1.25inch |
weight: 5g,
CNC V3-JR 1.25(#4-40) Gold Fixing screw bolt is #4-40 #4-40 ...2 Reviews
LowPriceRC
ASTRAL CONNECTOR CAPS FOR FUTABA/JR 10 PCS
,
111 Astral Connector caps For Futaba/JR 10 pcs Model Number: ...HobbyKing
CNC ALLOY SERVO ARM LONG (JR)
Specifications:, Weight:5g, : 52mm x 8mm (at tip) x 4mm (at tip),
CNC Machined Alloy servo arm for JR splines, holes are ...5 Reviews
HobbyKing
CNC ALLOY SERVO ARM SHORT (JR)
Specifications:, Weight:4g, Dimensions:, 35mm x 7mm (at tip) x 6mm (at tip),
CNC Machined Alloy servo arm for JR splines, holes are ...5 Reviews
HobbyKing
CNC ALLOY DOUBLE SERVO ARM X-LONG (JR)
Weight | 10g |
Specifications:, : 108mm x 8mm (at tips) x 4mm (at tips),
CNC Machined Alloy double servo arm for JR splines, holes ...5 Reviews
HobbyKing
ALLOY SERVO ARM FOR CAR 46MMXM3 (JR)
,
Alloy servo arm for car 46mmxM3 (JR)5 Reviews