HobbyKing
CNC V2-FUTABA 1.25 (#4-40) RED
| Material | aluminium 6061-T6 (anodized) |
| Length | 1.25inch |
weight: 5g,
CNC V2-Futaba 1.25 (#4-40) Red Fixing screw bolt is #4-40 ...5 Reviews
HobbyKing
BMS-303 ULTRA MICRO SERVO 0.7KG / .11SEC / 3.7G
| Weight | 3.7 grams / 0.14 oz. |
| Dimensions | 19 x 7.5 x 15.5 mm / 0.75 x 0.29 x 0.61 inch |
| Torque At 4.8V | 0.7kg/cm , 11 oz/in |
| Speed At 4.8V | 0.11sec / 60 deg at no load |
5 Reviews
HobbyKing
SSV 42G / 9.7KG-CM / .12SEC SERVO
| Weight | 42g / 1.46oz |
| Torque | 9.7kg-cm 132oz/in |
| Speed | .12sec / 60deg |
| Size | 40.5 x 20 x 38.5mm |
5 Reviews
HobbyKing
HITEC HS-422 DELUXE SERVO 3.3KG/45G/0.21SEC
| Motor Type | 3 Pole |
| Bearing Type | Oilite |
| Speed @ 4.8v | 0.21 sec @ 60 deg. |
| Speed @ 6v | 0.16 sec @ 60 deg. |
| Torque @ 4.8v | 3.3 kg.cm |
| Torque @ 6v | 4.1 kg.cm |
| Size | 40.6 x 19.8 x 36mm |
| Weight | 45g |
Specifications:,
Hitec HS-422 Deluxe servo 3.3kg/45g/0.21sec HS-422 is one of the ...5 Reviews
HobbyKing
CORONA DIGITAL SERVO 9G / 1.8KG / .12SEC
,
A lot of servos of different volume and weight come ...5 Reviews
HobbyKing
CNC RUDDER MOUNT ARM 4.0 INCH (#4-40) TI SILVER
| Color | Titanium Silver |
HobbyKing
VIGOR 39G / 2.5KG / .19SEC STANDARD SIZE SERVO
| Operating Voltage | 4.8-6.0V |
| 6.0V | ��3.5 kg.com (49 oz/in), 4.8V |
| 6.0V | 0.19 sec/ 60° at no load, 4.8V |
| Weight | 39.2g (1.37 oz) |
STD Direction:, Counter Clockwise / Pulse Travelling 1500 to 1900µsec, Stall Torque:, Operating Speed:, Size:, 40.6 x 20.0 x 38.9 mm,
5 Reviews
HobbyKing
HOBBYKING ULTRA MICRO SERVO 1.7G FOR 3D FLIGHT (LEFT)
| Size Category | Ultra Micro servo |
| Type | Digital |
| Application | Ultra-Micro Aircraft |
| Speed | 0.12sec |
| Torque | 80g |
| Voltage | 3.7V~4.2V |
| Dimensions | 20.8 x 15 x 11mm |
| Weight | 1.7 g |
| Gear Type | Nylon |
| Connector type | Micro JST |
Specifications:,
A light weight linear servo with inbuilt controller for 1S ...5 Reviews
HobbyKing
ARROW 9.1G / 1.5KG / .14SEC MICRO SERVO
,
The net weight of this servo is 8.4g. It can ...5 Reviews
HobbyKing
TOWERPRO MG996R 10KG SERVO 55G / 10KG / .20SEC
: JR (Fits JR and Futaba),
This is essentially an upgraded version of the famous towerpro ...5 Reviews
HobbyKing
HOBBYKING 929MG METAL GEAR SERVO 2.2KG/ 12.5G/ 0.10SEC
| Model | HK-CS929MG |
| Operating Voltage | 4.8V / 6.0V |
| Operating Current | 200mA / 240mA |
| Stall Torque | 2.0kg.cm /2.2kg.cm |
| Weight | 12.5g |
| Dead Band | ≤3uSec |
| Ball bearing | MR85 |
| Gear | Metal |
| Connector wire | 215mm |
| Operating Temperature Range | -20J+60J |
Operating Speed:, 0.12sec.60º/ 0.10sec.60º, Size:, 22.5X11.5X24.6mm(0.88"x0.45"x0.96"), Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 2 slider/Direct Drive,
HobbyKing 929MG Metal Gear Servo 2.2kg/ 12.5g/ 0.10sec5 Reviews
HobbyKing
HITEC HS-485HB DELUXE SERVO 4.8KG/45G/0.22SEC
| Applications | Helis and Aircraft up to 72 or up to 12lbs when using just one servo per control surface. |
| Motor Type | 3 Pole |
| Bearing Type | Top BB |
| Speed @ 4.8v | 0.22 sec @ 60 deg. |
| Speed @ 6v | 0.18 sec @ 60 deg. |
| Torque @ 4.8v | 4.8 kg.cm |
| Torque @ 6v | 6 kg.cm |
| Size | 39.8 x 19.8 x 38mm |
| Weight | 45g |
Features:, Note:, Be aware that high vibration gas (not glow) engines combined with large contol surfaces and large thows (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs., Warning:, Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail., Specifications:,
Hitec HS-485HB Deluxe servo 4.8kg/45g/0.22sec HS-485HB updates the very popular ...5 Reviews
HobbyKing
CARBON FIBER SERVO ARM 65MM (2PCS/BAG)
| Length | 65mm |
| Width | 21mm |
| Height | 2mm |
5 Reviews
HobbyKing
POWER HD 3688HB DIGITAL SERVO 25G/2.8KG/.07SEC
| Model | HD-3688HB |
| Voltage | 4.5v~6v |
| Speed @ 4.8V | .08sec |
| Speed @ 6V | .07sec |
| Torque @ 4.8V | 2.3kg/cm |
| Torque @ 6V | 2.8kg/cm |
| Weight | 26g |
| Size | 35.5x28.6x15mm |
5 Reviews
HobbyKing
BMS-955DMG DIGITAL LOW PROFILE HIGH SPEED METAL GEAR SERVO 5.2KG / 0.08SEC / 45G
| Weight | 45 grams / 1.59 oz. |
| Dimensions | 40.6 x 21.0 x 25.4 mm / 1.6 x 0.83 x 1 inch |
| Torque @ 4.8V | 4.2 kg/cm , 58 oz/in |
| Torque @ 6.0V | 5.2 kg/cm , 72 oz/in |
| Speed @ 4.8V | 0.11 sec / 60° at no load |
| Speed @ 6.0V | 0.08 sec / 60° at no load |
| Gear type | Metal gears / ball bearing |
| Motor type | coreless motor |
Specifications:,
BMS-955DMG Digital Low Profile High Speed Metal Gear Servo 5.2kg ...5 Reviews