HobbyKing
ALUMINUM CROSS UNIVERSAL SERVO ARM - JR, FUTABA & HITEC (RED)
Specifications:, Lenght:, 2mm Hole:, 10mm (Center to Hole 1), 14mm (Center to Hole 2), 18mm (Center to Hole 3), 3mm Hole:, 12mm (Center to Hole 1), 18mm (Center to Hole 2),
Aluminum Cross Universal Servo Arm - JR, Futaba & HITEC ...HobbyKing
RJX FS-0521HV METAL GEAR DIGITAL SERVO ULTRA HIGH SPEED AND TORQUE 21.3KG / 0.05SEC / 68G
| Operating Voltage | 6.0~8.4V |
| Speed | 0.07sec/60° @ 6.0V |
| Frequency | 1520us/333hz |
| Gear Type | All metal gear |
| Motor Type | Coreless |
| Dimensions | 40x20x37mm |
| Weight | 68g |
Specs:, Torque:, 17kg/cm (236.1oz/in) @ 6.0V, Plug Type:JR,
The RJX FS-0521HV provides the ultimate in performance for standard ...5 Reviews
HobbyKing
TURNIGY XGD-11MB DIGITAL MINI SERVO 2.2KG / 11G / 0.12
| Weight | 11g |
| Voltage | 4.8-6.0v |
| Type | Digital Micro |
| Gear Train | Meta |
| Ball Bearing | Yes |
| Plug | JR/Futaba |
Specs:, Size:, 23.1mmx12.0mmx24.9mm, Torque:, 2.2kg.cm (4.8v) - 2.5kg.cm (6.0v), Speed:, 0.12sec/60deg (4.8v) - 0.10 sec/60deg (6.0v),
Turnigy digital mini servo offering good torque, speed, excellent centering ...5 Reviews
HobbyKing
HEAVY DUTY 23T ALUMINUM SERVO ARM - JR & KO (GUNMETAL)
Specifications:, Lenght:, 19mm (Center to Hole 1), 24mm (Center to Hole 2),
Heavy Duty 23T Aluminum Servo Arm - JR & KO ...HobbyKing
JR MP82SWV WIDE VOLTAGE HIGH SPEED BRUSHLESS SERVO WITH METAL GEARS AND HEATSINK
| Weight | 72g |
| Voltage | 4.5~8.5v |
| Dimensions | 39 x 21 x 40.5mm |
Specs:, Torque:, 12.8 Kg.cm (4.8V) / 19.8 Kg.cm (7.4V), Speed:, 0.09s/60° (4.8V) / 0.06s/60° (7.4V), About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The MP82SWV has been designed for use with aerobatic aircraft ...HobbyKing
TURNIGY TGY-DS725MG HV DIGITAL CORELESS SERVO W/ALLOY CASE 18KG/.07SEC/68G
Operating Voltage:, Torque:, Speed:, Dimensions:, Weight:, Motor:, Working Frequency:, Servo Plug:, Servo Lead Length:,
The Turnigy TGY-DS725MG is a very high quality standard size ...HobbyKing
TURNIGY METAL GEAR SERVO 60G/15.5KG/.16SEC
| Model | TGY-1501MG |
| Voltage | 4.8~6.0v |
| Speed | 0.16~0.14sec |
| Torque | 15.5~17.0kg/cm |
| Weight | 60g |
| Size | 40.7x20.5x39.5mm |
5 Reviews
HobbyKing
HXT 9610 LOW PROFILE METAL GEAR SERVO 33G / 7.4KG / .16SEC
| Weight | 32g |
| Dimensions | 42 x 21.5 x 22mm |
| Torque | 7.4kg-cm |
| Speed | .20sec/60deg @ no load |
| Bearing | Yes Dual / M10x6 |
| Gear Type | Alloy / Steel |
5 Reviews
HobbyKing
BMS-951DMG LOW PROFILE HIGH TORQUE DIGITAL METAL GEAR SERVO 7.7KG / 0.13SEC / 45G
| Weight | 45 grams / 1.59 oz. |
| Dimensions | 40.6 x 21.0 x 25.4 mm / 1.6 x 0.83 x 1 inch |
| Torque @ 4.8V | 6.2 kg/cm , 86 oz/in |
| Torque @ 6.0V | 7.7 kg/cm , 107 oz/in |
| Speed @ 4.8V | 0.16 sec / 60° at no load |
| Speed @ 6.0V | 0.13 sec / 60° at no load |
| Gear type | Metal gears / ball bearing |
| Motor type | coreless motor |
Specifications:,
BMS-951DMG Low Profile High Torque Digital Metal Gear Servo 7.7kg ...5 Reviews
HobbyKing
HITEC HS-7985MG CORELESS DIGITAL SERVO 10.4KG/62G/0.16SEC
| Motor Type | Coreless |
| Bearing Type | Dual Ball Bearing |
| Speed @ 4.8v | 0.16 sec @ 60 deg. |
| Speed @ 6.0v | 0.13 sec @ 60 deg. |
| Torque @ 4.8v | 10.4kg.cm |
| Torque @ 6.0v | 12.4kg.cm |
| Size | 40 x 20 x 37mm |
| Weight | 62.00g |
| Features | G2 Digital Circuit |
| Programable Features Include | * Dead Band Width |
| Note | These features are only programable with the HFP-20 field programmer |
Specifications:,
Hitec HS-7985MG Coreless Digital Servo 10.4kg/62g/0.16sec (Metal Gear) The new ...5 Reviews
HobbyKing
BMS-830DMG+HS HIGH PERFORMANCE DIGITAL SERVO (METAL GEAR) 11.6KG / .12SEC / 58G
| Weight | 58g / 2.04oz |
| Dimensions | 40.5 x 20 x 37 mm / 1.60 x 0.78 x 1.52 inch |
| Torque At 4.8V | 11.6kg/cm , 152 oz/in |
| Torque At 6.0V | 13kg/cm , 181 oz/in |
| Speed At 4.8V | 0.12 sec / 60° at no load |
| Speed At 6.0V | 0.10 sec / 60° at no load |
5 Reviews
HobbyKing
GWS NARO SUPER 19G DIGITAL SERVO/JR & GYRO
| Model | Naro Super D/JR |
| Voltage | 4.8v~6.0v |
| Speed | .077sec |
| Torque | 3.6kg/cm |
| Weight | 19g |
| Input Voltage | 4.8V~6.0 V |
| Current Consumption | 10mA |
| Operation Temp | -5~60C |
Dimension:, 26.0x27.0x11.3 mm (1.02x1.06x0.45 in ), Weight:, 7.0 g (0.285oz) with Plastic Case, Gain Adjustment:, Single rate, non-remote, Applicable R/C System:, Futaba, JR,Hi-tec, Sanwa / Airtronics,Multiplex, GWS,
GWS Naro Super 19g Digital Servo GWS Piezo Gyro PG-035 Reviews
HobbyKing
HG 650 CARBONITE GEAR - 42G / .14S / 5.5KG
: 4.8V ~ 6.0V, :0.14s/60?0.12s/60?BR>, : 5.5Kg.cm, 6.3Kg.cm, : 39.5 x 36.7 x 19.5, : 42g,
HG Carbonite Servo 42g Made in Korea, the INO-LAB range ...5 Reviews