HobbyKing
FEIYU TECH FY-41AP-M MULTIROTOR FLIGHT CONTROLLER WITH OSD, GPS AND POWER SENSOR
Supported Multi-rotors:, Supported ESC output:, FY-41AP Module Working Voltage, Working Voltage Range:, Measuring current:, Power for FY-41AP module:, Power for Video transmission system :, Assistant Software System Requirement:, :, Max Yaw Angular Velocity:, Max Tilt Angle:, Ascent / Descent:, FY-41AP:, GPS :, Power Manager:,
The FY-41AP Flight controller is an inertial attitude measurement instrument ...HobbyKing
F-TEK OSD VIDEO OVERLAY MODULE W/GPS
| Input voltage | 3.0 ~ 3.3 Volt |
| Current draw | 60mA (3.3V) |
| Size | 32x32x10mm |
| Weight (excluding wires) | 22g |
| Temperature range | -25 ° C ~ +70 ° C |
| Includes | F-TEK OSD System |
| http | //www.feiyu-tech.com/ |
Specs:,
The F-TEK OSD overlays flight telemetry information onto your video ...5 Reviews
HobbyKing
HOBBYKING Y650 SCORPION GLASS FIBER MULTI-ROTOR FRAME 650MM
| Width | 650mm |
| Motor Bolt Holes | 32~40mm |
*Note:, The camera mount shown in last two photos is for reference only and is not included with the Y650 kit. It will be sold separately as an optional accessory., Specs:, Frame Weight:, 410g (w/out electronics), Required:, Multi-Rotor control board, Note:, All Hobbyking Y series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All Y series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking Y series also feature thicker GF main plates for added stength.,
The Hobbyking Y650 Scorpion multi-rotor frame is a high quality ...5 Reviews
HobbyKing
HOBBYKING X525 V3 GLASS FIBER QUADCOPTER FRAME 600MM
| Width | 600mm |
| Motor Bolt Holes | 14~30mm |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X525 V3 quadcopter frame has arrived! The Hobbyking ...5 Reviews
HobbyKing
HOBBYKING X550 GLASS FIBER QUADCOPTER FRAME 550MM
| Weight | 312g(Frame only) |
| Width | 550mm |
| Motor Bolt Holes | 19mm width |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X550 is a high quality folding-arm quadcopter frame ...5 Reviews
HobbyKing
HOBBYKING X666 GLASS FIBER QUADCOPTER FRAME 666MM
| Width | 666mm |
| Motor Bolt Holes | 14~30mm |
| Frame Weight | 415g |
Specs:, Required:, Multi-Rotor control board, Note:, All Hobbyking X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.,
The Hobbyking X666 quadcopter frame is a high quality glass ...5 Reviews
HobbyKing
TURNIGY TALON CARBON FIBER QUADCOPTER FRAME
| Weight | 240g |
| Width | 498mm |
| Motor Bolt Holes | 22~32mm |
Specs:,
If your looking for a high end, no compromise quadcopter ...5 Reviews
HobbyKing
FY-DOS INERTIAL ATTITUDE STABILISER WITH GPS (MULTI-ROTOR)
| Input voltage | 4.0 ~ 6.0 Volt |
| Current draw | 50ma (5v) |
| Size | 47x30x11mm |
| Weight (excluding wires) | 25g |
| Temperature range | -25°C ~ +70°C |
| Maximum rate of rotation | ≤ 2000°/s |
| Input voltage | 5 volt |
| Current draw | 60ma (3.3v) |
| Size | 32x32x10mm |
| Weight (excluding wires) | 22g |
| Temperature range | -25°C ~ +70°C |
| Package includes | DoS Module |
| software/firmware and supported by the HobbyKing global warranty network. Visit http | //www.feiyu- |
Features:, • Deactivated Mode - In this mode all control is with the pilot and the DoS does not participate, DoS Module Specs:, GPS Module Specs:, :A user manual is available under the Files tab.,
The FY-DoS inertial attitude stabiliser is for the stabilisation of ...5 Reviews
HobbyKing
QUANUM FPV GROUND STATION WITH 8" MONITOR AND VOLTAGE DISPLAY
| Power Consumption | DC12V 400mA |
| Panel Size and Aspect | 8inch 4 |
| Resolution | 800x600 pixel |
| Viewing Angle | 130Deg |
| Brightness | 250cd/m2 |
| Response time | 12ms |
| Outside | 375x254x127mm |
| Inside Lower compartment | 305x229x64mm |
| Inside Upper Compartment | 305x229x45mm |
| Connections | (Upper) |
| Includes | Case |
Monitor Specs:, 400:1, Input:, BNC, RCA Video-audio, VGA, YUV, VGA Inputs resolution:, 640x480, 800x600, 1024x768 all 60Hz requires VGA 15 pin to 8 pin, Case Dimensions:, *Note:, This is a DIY Ground station and does not come with video receivers or PC components. It is dependent on your application for proper component selection and fitment.,
The Quanum is a DIY ground station all in one ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 6A V2 ESC WITH BLHELI AND LBEC 2-3S
Constant Current:, Input Voltage:, BEC:, [Remove middle wire to dissable], BEC Output:, PWM:, Max RPM:, PCB Size:, Discharge Plugs:, Motor Plugs:, Weight:,
MultiStar ESCs are a quality speed controller at a fantastic ...HobbyKing
MULTIROTOR AUTOPILOT - YS-X4 V2
,
The YS-X4 V2 from ZERO TECH adheres to continuous innovation ...HobbyKing
MULTIROTOR AUTOPILOT - GEMINI
,
The Gemini Multi-Rotor Flight controller is a complete redundancy autopilot ...