GetFPV
READY TO FLY QAV400 (RTF)
NOTE: This build does not include Lipos and charger. We recommend either 2200mah or 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV400 FPV Quadcopter frame. ...GetFPV
READY TO FLY QAV500 (RTF)
NOTE: This build does not include Lipos and charger. We recommend 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV500 FPV Quadcopter frame. ...GetFPV
READY TO FLY QAV400 (RTF)
NOTE: This build does not include Lipos and charger. We recommend either 2200mah or 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV400 FPV Quadcopter frame. ...GetFPV
QAV400 FPV QUADCOPTER FRAME (PRE-ORDER)
| Weight | 375g (without landing gear) |
| AUW | 1165g with 2200mah 4s nanotech lipo, gopro3, flight cam, TX, and CC3D board |
| Flight Time | 9 minutes hover with 2200mah 4s nanotech |
| Body | G10 |
| Booms | Anodized machined Aluminum |
| Suggested Props | Graupner 8" E-Props |
| Motor Choice | Tiger Motor |
Power: Like the QAV500, the QAV400 comes with a power distribution board to solder the ESCs to as well as FPV electronics to, Suggested Lipo: 4s 2200mah up to 3300mah. HobbyKing NanoTech Lipos in these sizes fit the frame well in terms of dimensions. Max Lipo Dimensions: W: 54mm, H: 35mm, L: 150mm, Suggested ESC:, Tiger Motor 18amp ESC,
Details The new QAV400 FPV Quadcopter is nimble acrobat that ...GetFPV
MOTOR MOUNT KIT (6PCS)
Motor Mount Kit and Upgrade for version 1.0 kits to v1.1 and up of the kit. This upgrade includes 6 Delrin plates total: 4 regular motor mounts and 2 Yaw motor mounts. This kit only includes the Delrin plates and does not include motor mounting hardware. You can separately purchase the available outrunner mounting hardware to mount outrunners with 16mmx19mm M3 mounting threads. This motor mount upgrade enables you to mount HobbyKing AX-2213N, NX-4000, and DT-750 motors as well as regular outrunners. The hardware from your original v1.0 kit enables you to mount AX-2213, DT-750, or similar motors. The NX-4000 series motors require M2.5x20mm screws (not included), but you can use the black spacers included in the v1.0 kit.,
Details Motors and motor mounting hardware not included.GetFPV
MOTOR MOUNT KIT (6PCS)
Motor Mount Kit and Upgrade for version 1.0 kits to v1.1 and up of the kit. This upgrade includes 6 Delrin plates total: 4 regular motor mounts and 2 Yaw motor mounts. This kit only includes the Delrin plates and does not include motor mounting hardware. You can separately purchase the available outrunner mounting hardware to mount outrunners with 16mmx19mm M3 mounting threads. This motor mount upgrade enables you to mount HobbyKing AX-2213N, NX-4000, and DT-750 motors as well as regular outrunners. The hardware from your original v1.0 kit enables you to mount AX-2213, DT-750, or similar motors. The NX-4000 series motors require M2.5x20mm screws (not included), but you can use the black spacers included in the v1.0 kit.,
Details Motors and motor mounting hardware not included.HobbyKing
FPV FIBERGLASS PAN-TILT CAMERA MOUNT L-SIZE
| Dimensions | 42x40mm |
| Weight | 10g |
| Servo type required | 5~10g |
5 Reviews
HobbyKing
FPV FIBERGLASS PAN-TILT CAMERA MOUNT
HobbyKing FPV mount ..." />
| Dimensions | 36x28mm |
| Camera Mount plate size | 28x26mm |
| Servo type required | 5~10g |
Weight:8g,
Light weight and easy to install. Our HobbyKing FPV mount ...5 Reviews
HobbyKing
USBASP AVR PROGRAMMING DEVICE FOR ATMEL PROCCESSORS
| Includes | 1 x USBasp Device |
5 Reviews
HobbyKing
10CM MALE TO MALE SERVO LEAD (JR) 26AWG (10PCS/SET)
,
10CM Male to Male Servo Lead (JR) 26AWG (10pcs/set) Ideal ...5 Reviews
HobbyKing
HOBBY KING QUADCOPTER POWER DISTRIBUTION BOARD
HobbyKing Enginerds, this handy power ..." />
Current:, 4 x 20A Outputs (MAX), Power Input:, XT60 with 12AWG wire, Motor output:, 4 x 3.5mm Female bullet plug, Aux output:, 2 pin JST compatible, Weight:, 27.3g (including wires),
Designed in house by the HobbyKing Enginerds, this handy power ...5 Reviews
HobbyKing
TURNIGY INTEGRATED PCB MICRO-QUAD (KIT)
| Width | 250mm |
| Height | 85mm |
Features:, Light weight design., Specs:, Flying Weight:, 145g (not including RX and battery), Required:, 4 x Turnigy T1811-2900kv,
This tiny yet brilliantly designed Micro-Quad features an integrated PCB ...5 Reviews
HobbyKing
F-TEK OSD VIDEO OVERLAY MODULE W/GPS
| Input voltage | 3.0 ~ 3.3 Volt |
| Current draw | 60mA (3.3V) |
| Size | 32x32x10mm |
| Weight (excluding wires) | 22g |
| Temperature range | -25 ° C ~ +70 ° C |
| Includes | F-TEK OSD System |
| http | //www.feiyu-tech.com/ |
Specs:,
The F-TEK OSD overlays flight telemetry information onto your video ...5 Reviews
HobbyKing
ATMEL ATMEGA SOCKET FIRMWARE FLASHING TOOL
| Pointing accuracy | ± 0.05 mm |
| Spring force | [ ±20%] |
| Housing | LG chem ABS-AF312 |
| Cable length | 420mm |
Features:, High point precision., Specifications:, Socket :, Phosphor Bronze / Gold Plated, Plunger :, Hardened Beryllium copper / Gold Plated, Barrel :, Phosphor Bronze / Gold Plated, Spring :, Music Wire / Gold Plated, Requires:, USBasp AVR Programming Device for ATMEL proccessors, Suits the Following MCU:, Atmel Atmega8, Atmega48, Atmega88, Atmega168, Atmega328,
This genius tool makes flashing the Atmel Atmega MCU found ...5 Reviews
HobbyKing
H550 V2 GLASS FIBER HEXCOPTER FRAME 550MM - INTEGRATED PCB VERSION
| Width | 550mm |
| Height | 55mm |
| Weight | 478g |
| Motor Mount Bolt Holes | 16/19mm |
Features:, Built from quality glass fiber and polyamide nylon., Specs:, Required:, 6 x 28mm 1000~1200kv (or similar size/kv),
The H550 V2 is a well thought out 550mm hexcopter ...5 Reviews