RCModelScout.

ngHobbies

HITEC OPTIMA 6 CHANNEL 2.4GHZ SUPER VALUE PACK

HobbyKing

ZEROUAV ZERO-STEADI470 QUADCOPTER AERIAL PHOTOGRAPHY SYSTEM (PNF)

Features (YS-X6):, Ultra precise altitude and GPS position hold, YS-X6 Flight Controller Specs:, Operating voltage:, 3.7~22.2V (no UBEC is required), MC:92x61x18mm, MU:48.5x40.5x22mm, Way points:, 4 Programmable as standard (Upgradeable), ZERO-Stedi470 Quadcopter Specs:, Max payload weight:, 300-400g (SONY 5N, GH2), Flight Endurance:, 18 minutes @ no payload, 10~12 minutes @ max payload., Operational speed:, Max 10.2m/s (adjustable), Included in box:, 1 x Quadcopter Airframe, Requires:, Your own 4~6CH transmitter & receiver or Android/IOS mobile device, *Note:, For more detailed information about upgrade paths and specifications download the user manual located under the "Files" tab below.,

HobbyWireless

DJI NAZA-M MULTIROTOR AUTOPILOT V2 W/GPS

Details:, , Features:, , It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,

Hobby-Lobby

DJI NAZA-M V2 W/GPS

What's new with the NAZAM V2 Hardware:, PMU V2 - New case design with CANBUS port. Enhanced BEC functionality, better heat dissipation. Extra CANBUS ports, enhances the expandability of the system and will support Gopro Zenmuse, iOSD and Bluetooth module for assistant software use on smart phones in the future, etc. NAZA V1 can also be upgraded using PMU V2 and support Gopro Zenmuse, iOSD and Bluetooth module., What's new with the NAZAM V2 Firmware and functions:, New attitude stabilization algorithm, provides better flight performance / maneuverability., It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction: In course lock flying, the forward direction is the same as a recorded nose direction. In home lock flying, the forward direction is the same as the direction from home point to multi-rotor.,

HobbyKing

ZEROUAV ZERO-STEADI470 QUADCOPTER AERIAL PHOTOGRAPHY SYSTEM (YS-X6-P FLIGHT CONTROL SYSTEM) (PNF)

Features (YS-X6-P):, YS-X6-P update version now with 10 waypoints standard, YS-X6-P Flight Controller Specs:, Operating voltage:, 3.7~22.2V (no UBEC is required), MC:92x61x18mm, MU:48.5x40.5x22mm, Way points:, 10 Programmable as standard (Upgradeable), ZERO-Stedi470 Quadcopter Specs:, Max payload weight:, 300-400g (SONY 5N, GH2), Flight Endurance:, 18 minutes @ no payload, 10~12 minutes @ max payload., Operational speed:, Max 10.2m/s (adjustable), Included in box:, 1 x Quadcopter Airframe, Requires:, Your own 4~6CH transmitter & receiver or Android/IOS mobile device,

BevRC

DJI NAZA-M LITE WITH GPS COMBO

It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. ., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points,the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 1)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., For all the product info and support, please check here:,

BevRC

DJI NAZA-M LITE CONTROLLER

Key features & Functions:, , Specifications:, , MC:4.8V~5.5V, VU: 7.2V ~ 26.0 V (recommend 2S ~ 6S LiPo), MC:25g, VU:20g, MC: 45.5mm x 31.5mm x 18.5mm, VU: 32.2mm x 21.1mm x 7.7mm,

HobbyKing

DJI NAZA-M LITE MULTI-ROTOR FLIGHT CONTROLLER GPS COMBO

Supported Multi-Rotor:, Supported ESC output:, Recommended Transmitter:, Working Voltage Range:, Operating Temperature:, Assistant Software System Requirement:, Dimensions:, Weight:, Hovering Accuracy (GPS Mode):, Max Yaw Angular Velocity:, Max Tilt Angle:, Ascent/Descent:,

HobbyKing

DJI NAZA-M LITE MULTI-ROTOR FLIGHT CONTROLLER

Supported Multi-Rotor:, Supported ESC output:, Recommended Transmitter:, Working Voltage Range:, Power Consumption:, Operating Temperature:, Assistant Software System Requirement:, Dimensions:, Weight:, Hovering Accuracy *(GPS Mode):, Max Yaw Angular Velocity:, Max Tilt Angle:, Ascent/Descent:, GPS Module not included with this version. Can be purchased separately as an add-on module.,

HobbyKing

THUNDER QQ SUPER - MULTI-ROTOR FLIGHT CONTROLLER

Dimensions:,

HobbyKing

HK PILOT32 AUTONOMOUS VEHICLE 32BIT CONTROL SET W/ POWER MODULE

Size:, Weight:, 32-bit STM32F427 Cortex M4 core with FPU,

HobbyKing

MULTIROTOR AUTOPILOT - YS-X4 V2

,