HiModel
GEMFAN 5030 / 5 X 3" 3-BLADE PROPELLERS -ORANGE (3PCS)
Specifications:, ,
Features: Includes/Requires:HiModel
GEMFAN 5030 / 5 X 3" 3-BLADE COUNTER ROTATING PROPELLERS - GREEN (3PCS)
Specifications:, ,
Features: Includes/Requires:HiModel
GEMFAN 5030 / 5 X 3" 3-BLADE PROPELLERS - BLACK (3PCS)
Specifications:, ,
Features: Includes/Requires:HiModel
GEMFAN 5030 / 5 X 3" 3-BLADE COUNTER ROTATING PROPELLERS - BLACK (3PCS)
Specifications:, ,
Features: Includes/Requires:HiModel
GEMFAN 5030 / 5 X 3" 3-BLADE PROPELLERS - GREEN (3PCS)
Specifications:, ,
Features: Includes/Requires:HiModel
REPTILE500 4-AXIAL/XCOPTER DIY FRAME - STANDARD EDITION
| Motor spacing(distance between motor axles, cross side) | 500mm |
| Weight | 346g |
| Mode | 4-axial, X mode |
| Material | engineering plastics |
| Motor mounting seat spacing | 16cm/ 19cm |
| brushless motor | HL 3525 series or HiModel 2212-2217 series or AX 2810Q. |
| KV range | 3S Lipo 800-1100KV; 4S Lipo 600-700KV |
| Suitable camera | Gopro HD19 camera etc |
| Propeller size | 10-11inch 2-blade; 8-9 inch 3-blade |
, , , , , , Specifications:, , , , , , , , , , , REPTILE500 4-axial/Xcopter DIY Frame - Standard Edition, Landing skid type: No, Suggested setting (not included):, * Not assembled, camera mount/tilt sold separately., , ,
Includes/Requires: Includes:2 x central boards 4 x arms 1 x ...1 Reviews
HiModel
REPTILE500 4-AXIAL/XCOPTER DIY FRAME - HIGH LANDING SKID VERSION V2
| Motor spacing(distance between motor axles, cross side) | 500mm |
| Weight | 550g |
| Mode | 4-axial, X mode |
| Central board material | Fiberglass, 1.5mm thick |
| Arm Material | engineering plastics |
| Landing skid type | high landing skid, easy-disassemble design |
| Height of landing skid | 190mm |
| Motor mounting seat spacing | 16cm/ 19cm |
| brushless motor | HL 3525 series or HiModel 2212-2217 series or AX 2810Q. |
| KV range | 3S Lipo 800-1100KV; 4S Lipo 600-700KV |
| Suitable camera mount/tile | T12 (suite for Gopro HD19 camera etc) |
| Propeller size | 10-11inch 2-blade; 8-9 inch 3-blade |
, , , , , , Specifications:, , , , , , , , , , , REPTILE500 4-axial/Xcopter DIY Frame - Standard Edition, Suggested setting (not included):, * Not assembled, camera mount/tilt sold separately., , ,
Includes/Requires: Includes:2 x central boards 4 x arms 1 x ...1 Reviews
HiModel
FLYCAT 4-AXIAL DIY FRAME W/GOPRO GIMBAL (CAMERA MOUNT)
| Motor spacing(distance between motor axles, cross side) | 480mm |
| Mode | 4-axial |
| Brushless motor | HL 4225-610. |
| Battery | 3000-4000mAh 4S |
| Suggested prop | 10x4.5 3-blade |
, , , , , , Specifications:, , , , , , , , , , , FLYCAT 4-axial/Xcopter DIY Frame W/Gopro Gimbal (Camera Mount), * Electronics and propellers are not included, to be purchased separately., --------------------------------------------------------------------------------------------, Suggested setting (not included):, , ,
Features: This DIY frame can adopt most popular flight control ...HiModel
FLYCAT 4-AXIAL DIY FRAME W/ 2 GIMBALS (CAMERA MOUNTS) V2 - HIGH LANDING SKID
| Motor spacing(distance between motor axles, cross side) | 480mm |
| Mode | 4-axial |
| Brushless motor | HL 4225-610. |
| Battery | 3000-4000mAh 4S |
| Suggested prop | 10x4.5 3-blade |
, , , , , , Specifications:, , , , , , , , , , , FLYCAT 4-axial DIY Frame W/ 2 Gimbals (Camera Mounts) V2 - High Landing Skid, * Electronics and propellers are not included, to be purchased separately., --------------------------------------------------------------------------------------------, Suggested setting (not included):, , ,
Features: This DIY frame can adopt most popular flight control ...HiModel
HIMODEL CLOUD SERIES 1803- 1900KV OUTRUNNER BRUSHLESS MOTOR FOR QUADCOPTER/MULTI-ROTOR AIRCRAFT (SHAFT REVERSABLE)
| Model | C1803-1900KV |
| KV (rpm/v) | 1900 |
| Non-load current | 0.4a @7V |
| Lipo Battery (cell) | 2S-4S Li-poly |
| Power | 45W |
| Resistance | 0.480mΩ |
| Wire length | 15cm |
| Weight | 17.3g / 0.61oz (with wires) |
| Application | specially designed for quadcopter and multi-rotor aircrafts. |
, , , , , , Specifications:, , , , , , , , , , , Type, , Prop, , Voltage(V), , Current(A), , g/w ratio, , Pull（g), , C1803, , 7x3.5 3-blade, , 7.4, , 2, , 6.08, , 90, , , , , , 7.4, , 4.7, , 5.46, , 190, , , ,
Features: Specially designed for muti-rotor aircraft application. Motor shaft is ...HiModel
LOTUSRC T580 QUADCOPTER --AP/AV BASED ARTF - NEW PROTOCOL
, , , , , , Specifications:, , , , , , , , , , , Machine size, , 608 × 608 × 243, , mm, , ±3mm, , Expand size of the largest, , 885 × 885 × 243, , mm, , , , Motor Wheelbase, t, , Diagonal line, the two motor centers wheelbase, , 580mm, , ±3mm, , Propeller, , 1260, positive and negative special paddle, , 12”, , , , Battery, , LiPo 3S 2200mAh 20C, , 1P, , , , Single Weight, , No battery, receiver, load, , 730g, , ±10g, , Take-off weigh, , 3S 2200mAh 1P Battery, receiver, head, , 950g, , standard, , Payload, , Camera card, , ≤230g, , standard, , Maximum power pulled, , Using the standard battery 1P, , 2400g, , , , -, , Maximum payload, , Using the standard battery 1P, , ≤580g, , , , -, , Maximum takeoff weight, , Using the standard battery 1P, , 1800g, , Safety limit, , Flight distance, , Remote control device and battery capacity by the decision, , -, , , , -, , Flight Time, , 3S 2200mAh 1P Battery, receiver, , 12 minutes, , No wind hover, , Wind strength, , ≤4, , Class, , , , -, , , , ,
Features: Main features of the T580 quadcopter:1.ARTF 1)Inertial-based(6DOF IMU) self-stabilization ...5 Reviews
HiModel
WALKERA 2.4G QR LADYBIRD QUADCOPTER W/O TRANSMITTER
| 2). Motors (x4) | 0720RN57A-9M-130NL52 |
| 3). Receiver | RX2634H-D |
| 4). Battery | 3.7V 240mAh (not included) |
| 5). Dimensions | 8.5*8.5cm |
| 6). Height | 3cm |
| 8). Flight time | 6-8min |
| Transmitter requirement | DEVO series radios (S type required for telemetry information) |
, , , , , , Specifications:, , , , , , , , , , , WALKERA 2.4G QR Ladybird Quadcopter W/O Transmitter, 1). Onboard telemetry (Devo S type transmitters required for telemetry information, not included), 7). Radio range: , , ,
Features: - The latest 6-axis flight control system, with adjustable ...HiModel
WALKERA 2.4G QR SPACEWALKER OCTOCOPTER/ QUADCOPTER RTF
| 1). Main Rotor Dia. | 55.8mm |
| 2). Standard transmitter | 2402D |
| 3). Gyro | Six-Axis |
| 4). Overall Length | 242mm |
| 5). Transmitter | 2402D (mode 1, mode 2 optional, mode 2 will be sent by default) compatible transmitters |
| 6). Drive Motor | 0720RN |
| 7). Overall Width | 242mm |
| 8). All-up Weight | 70g( Battery included) |
| 9). Battery | 3.7V 600mAh Li-Po (not included) |
| 10).Receiver | RX2640H-D |
, , , , , , Specifications:, , , , , , , , , , , WALKERA 2.4G QR Spacewalker Octocopter/ Quadcopter RTF, , ,
Features: 1). Adopting octocopter-motors driving system,stable flight, and can easily ...1 Reviews