HiModel
WALKERA 2.4G QR LADYBIRD QUADCOPTER W/O TRANSMITTER
| 2). Motors (x4) | 0720RN57A-9M-130NL52 |
| 3). Receiver | RX2634H-D |
| 4). Battery | 3.7V 240mAh (not included) |
| 5). Dimensions | 8.5*8.5cm |
| 6). Height | 3cm |
| 8). Flight time | 6-8min |
| Transmitter requirement | DEVO series radios (S type required for telemetry information) |
, , , , , , Specifications:, , , , , , , , , , , WALKERA 2.4G QR Ladybird Quadcopter W/O Transmitter, 1). Onboard telemetry (Devo S type transmitters required for telemetry information, not included), 7). Radio range: , , ,
Features: - The latest 6-axis flight control system, with adjustable ...Hobby-Lobby
TEKDRONES Q4 QUAD COPTER - GREEN/SMOKE
The Build:, It should only take you around 15-20 minutes to assembly the copter parts. It includes all hardware needed and the online assembly manual walks you through the process in great detail., Equipment:, The Q4 is a frame only kit, requireing you to add the motors, ESC's, flight board, radio, and battery. Don't worry, we'll make it easy to get all the parts you need. Just click on the "Everything You Need" tab above to our complete list of reccomended items., Flying:, Flying the Q4 is a complete joy. Using the reccomended Naza flight board with GPS, even a complete newcomer can fly one. The unique shape of the Q4 makes it easy to keep orientation both during the day and while night flying., Uses:, The Q4 can be used for many purposes. Start out with the basics and just learn to fly it around. That is fun in and of itself. You can also add cameras and first person video equipment so you can see what the camera sees in real time using video goggles or a TV monitor. First Person Video or FPV flying is a blast. You can attach a gyro stabilized camera gimbal and start getting stable video footage or even take photographs from the air. It's a great way to get a unique perspective., Support:, If you need help setting up your Q4, you can reach us on the phone or via email and our copter experts will be glad to assist you., Custom:, Want a complete Q4 package, built, tested, and tuned, suited to your needs? We can do that! Just give us a call and ask to speak to one of our copter experts and we'll go over the details with you.,
Like nothing you've seen before >> Check back often for ...Hobby-Lobby
TEKDRONES Q4 QUAD COPTER - YELLOW/BLACK
The Build:, It should only take you around 15-20 minutes to assembly the copter parts. It includes all hardware needed and the online assembly manual walks you through the process in great detail., Equipment:, The Q4 is a frame only kit, requireing you to add the motors, ESC's, flight board, radio, and battery. Don't worry, we'll make it easy to get all the parts you need. Just click on the "Everything You Need" tab above to our complete list of reccomended items., Flying:, Flying the Q4 is a complete joy. Using the reccomended Naza flight board with GPS, even a complete newcomer can fly one. The unique shape of the Q4 makes it easy to keep orientation both during the day and while night flying., Uses:, The Q4 can be used for many purposes. Start out with the basics and just learn to fly it around. That is fun in and of itself. You can also add cameras and first person video equipment so you can see what the camera sees in real time using video goggles or a TV monitor. First Person Video or FPV flying is a blast. You can attach a gyro stabilized camera gimbal and start getting stable video footage or even take photographs from the air. It's a great way to get a unique perspective., Support:, If you need help setting up your Q4, you can reach us on the phone or via email and our copter experts will be glad to assist you., Custom:, Want a complete Q4 package, built, tested, and tuned, suited to your needs? We can do that! Just give us a call and ask to speak to one of our copter experts and we'll go over the details with you.,
Like nothing you've seen before >> Check back often for ...HobbyKing
FY-DOS INERTIAL ATTITUDE STABILISER WITH GPS (MULTI-ROTOR)
| Input voltage | 4.0 ~ 6.0 Volt |
| Current draw | 50ma (5v) |
| Size | 47x30x11mm |
| Weight (excluding wires) | 25g |
| Temperature range | -25°C ~ +70°C |
| Maximum rate of rotation | ≤ 2000°/s |
| Input voltage | 5 volt |
| Current draw | 60ma (3.3v) |
| Size | 32x32x10mm |
| Weight (excluding wires) | 22g |
| Temperature range | -25°C ~ +70°C |
| Package includes | DoS Module |
| software/firmware and supported by the HobbyKing global warranty network. Visit http | //www.feiyu- |
Features:, • Deactivated Mode - In this mode all control is with the pilot and the DoS does not participate, DoS Module Specs:, GPS Module Specs:, :A user manual is available under the Files tab.,
The FY-DoS inertial attitude stabiliser is for the stabilisation of ...5 Reviews
HobbyKing
MULTISTAR ELITE 2204-2300KV SET OF 4 CW/CCW (2/CCW 2/CW)
KV(RPM/V):, Lipo cells:, Max current:, Max Amps:, No Load Current:, Internal Resistance:, Number of Poles:, Dimensions(Dia.xL):, Motor Shaft:, prop shaft:, Weight:, bolt hole spacing:, Lamination thickness:, Magnets:, Balancing spec:, Wire:, Connectors:, Some ESC may have sync issue if you are not running the latest software (SimonK or BLheli), Please make sure you update and configure your esc for this type of motor.,
The Turnigy Multistar Elite Outrunners are designed with one thing ...HobbyKing
MULTISTAR ELITE 2204-2300KV MULTI-ROTOR MOTOR (CW PROP ADAPTER)
KV(RPM/V):, Lipo cells:, Max current:, Max Amps:, No Load Current:, Internal Resistance:, Number of Poles:, Dimensions(Dia.xL):, Motor Shaft:, prop shaft:, Weight:, bolt hole spacing:, Lamination thickness:, Magnets:, Balancing spec:, Wire:, Connector:, Some ESC may have sync issue if you are not running the latest software (SimonK or BLheli), Please make sure you update and configure your esc for this type of motor.,
The Turnigy Multistar Elite Outrunners are designed with one thing ...HobbyKing
MULTISTAR ELITE 2204-2300KV MULTI-ROTOR MOTOR (CCW PROP ADAPTER)
KV(RPM/V):, Lipo cells:, Max current:, Max Amps:, No Load Current:, Internal Resistance:, Number of Poles:, Dimensions(Dia.xL):, Motor Shaft:, prop shaft:, Weight:, bolt hole spacing:, Lamination thickness:, Magnets:, Balancing spec:, Wire:, Connector:, Some ESC may have sync issue if you are not running the latest software (SimonK or BLheli), Please make sure you update and configure your esc for this type of motor.,
The Turnigy Multistar Elite Outrunners are designed with one thing ...HobbyKing
MULTISTAR ELITE 3508-268KV HIGH VOLTAGE ENDURANCE MOTOR
| KV(RPM/V) | 268KV |
| Lipo cells | 4-8 s |
| Max current | 330W |
| Max Amps | 11A |
| No Load Current | 0.13A/10V |
| Internal Resistance | 0.618 ohm |
| Number of Poles | 12/14 |
| Dimensions(Dia.xL) | 35×8 mm |
| Motor Shaft | 4mm |
| prop shaft | 5mm |
| Weight | 96g |
| bolt hole spacing | 19*25 mm |
| Lamination thickness | 0.2 mm |
| Magnets | N45 SH |
| Bearing | EZO Japan |
| Balancing spec | 0.005g |
HobbyKing
MULTISTAR ELITE 4006-740KV MULTI-ROTOR MOTOR
| KV(RPM/V) | 740KV |
| Lipo cells | 3-4 s |
| Max Amps | 27A |
| No Load Current | 0.5A/10V |
| Internal Resistance | 0.136 ohm |
| Number of Poles | 18/24 |
| Dimensions(Dia.xL) | 40×6 mm |
| Motor Shaft | 4 mm |
| prop shaft | 5mm |
| Weight | 93g |
| bolt hole spacing | 16*19 mm |
| Lamination thickness | 0.2mm |
| Magnets | N45 SH |
| Bearing | EZO |
| Balancing spec | 0.005g |
HobbyKing
MULTIROTOR AUTOPILOT - YS-X4 V2
,
The YS-X4 V2 from ZERO TECH adheres to continuous innovation ...HobbyKing
MULTIROTOR AUTOPILOT - GEMINI
,
The Gemini Multi-Rotor Flight controller is a complete redundancy autopilot ...