Skip to content

NitroTek

CYCLONE PRO NITRO RADIO CONTROL CARS

  • Width
  • 199MM
  • Height
  • 115MM
  • Track
  • 185MM
  • Length
  • 380MM
  • Wheelbase
  • 259MM
  • Gear ratio
  • 5.69
  • Engine
  • New Team Infinity 18
  • Wheel dia.
  • 64*26MM
  • Ground clearance
  • 8.5MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
    • ,
    • 4WD Shaft drive system
    • ,
    • Fully ball raced system
    • ,
    • Infinity .18 pull start engine
    • ,
    • Aluminium adjustable oil-filled shocks
    • ,
    • Two speed automatic gear box
    • ,
    • Front and rear bevel differentials
    • ,
    • 75CC Fuel tank
    • ,
    • Metal disc brake system
    • ,
    • Pre-painted and cut body shell
    • ,
    • Sealed box for protecting receiver system
    • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
    • ,
    ,

    Our quickest model, the Cyclone PRO is for the serious ...

    NitroTek

    BACKWASH PRO NITRO RADIO CONTROLLED BUGGY

  • Length
  • 400mm
  • Height
  • 160mm
  • Width
  • 250mm
  • Wheelbase
  • 275mm
  • Gear Ratio 2 Speed
  • 5.84
  • Ground Clearance
  • 26mm
  • Front Tyres
  • 32mm width 86mm diameter
  • Rear Tyres
  • 40mm width 86mm diameter
  • Radio
  • Wheel type 2.4G
  • Engine
  • Infinity .18

      ,
    , ,
    All the top features of the standard Backwash nitro radio controlled car as listed below, plus loads of hop ups pre-installed as listed above!
    ,
      ,
    • Pivot Ball suspension
    • ,
    • Assembled Oil-filled aluminium shocks
    • ,
    • 2.5mm thick anodised aluminium chassis
    • ,
    • Composite Tuned Pipe
    • ,
    • Pre-painted body with decals applied
    • ,
    • Super-efficient 4WD shaft-drive
    • ,
    • 75 cc fuel tank with splash guard
    • ,
    • 2 speed automatic gearbox
    • ,
    • Hollow light weight flywheel
    • ,
    • Slipper clutch system to protect spur gear
    • ,
    • High impact & high traction electroplated wheels
    • ,
    • Fiber disc brake for extra stopping power
    • ,
    • Front and rear hardened metal drive gears
    • ,
    • Sealed radio box protects the electronics
    • ,
    • Adjustable steel turnbuckles
    • ,
    • High performance Infinity 18 Engine
    • ,
    • Wheel controller
    • ,
    ,

     

    ,

    The Backwash Pro is the ultimate nitro rc car, if ...

    NitroTek

    HSP 1/8 RADIO CONTROLLED OFF ROAD ROCK CRAWLER

  • Height
  • 225mm
  • Length
  • 645mm
  • Width
  • 375mm
  • Motors
  • 2 x 540
  • Weight
  • 5300g
  • Wheelbase
  • 460mm
  • Radio
  • 2ch Stick type 27mhz
  • Wheel Diameter
  • 182mm
  • Wheel Width
  • 82mm
  • Battery
  • 7.2v 2000 MaH

      ,
    • Gear Ratio: 1:48
    • ,
    , ,
      ,
    • Independent front/rear gear box
    • ,
    • Twin motor driven system
    • ,
    • Aluminium solid side guards
    • ,
    • Aluminium oil filled shock absorbers
    • ,
    • Equipped with lots of metal parts
    • ,
    • 1/8 the scale body design
    • ,
    • High quality off-road climbing tyres
    • ,
    • The perfect design enables the Crawler to climb over the most challenging rugged terrain
    • ,
    • Battery is well fixed with a plate set, secure but easy to remove.
    • ,
    • Chrome plated Wheel Secure Cover is fixed by 18 screws ensuring the Tyre and Wheel Rim do not separate.
    • ,
    • Suitable for all terrains indoor & outdoor
    • ,
    ,

    If speed is the key to racing, finesse is the ...

    NitroTek

    WEREWOLF 1/8 BRUSHLESS ELECTRIC RC BUGGY - STANDARD VERSION

  • Height
  • 185mm
  • Length
  • 505mm
  • Width
  • 310mm
  • Wheel base
  • 315~320mm
  • Track F/R
  • 310mm
  • Ground clearance
  • 30mm
  • Weight
  • 3000g
  • Radio
  • 2.4Ghz Pistol Type
  • Battery
  • 11.1V Li-Po With Charger
  • Motor
  • Brushless with ESC

      ,
    • Scale: 1:8
    • ,
    , ,
      ,
    • 1/8 Scale brushless powered car
    • ,
    • Extreme High Speeds
    • ,
    • 2.4G Radio Equipment
    • ,
    • 4WD Shaft drive system
    • ,
    • 3 diff. shaft drive 4WD
    • ,
    • 2.5mm aluminium chassis
    • ,
    • 3mm F/R Alum. shock tower;
    • ,
    • High-torque metal geared steering servo
    • ,
    • Front universal drive shafts (pro version)
    • ,
    • All linkages set with adjustable turnbuckles
    • ,
    • Option for four disc brake system
    • ,
    • Brushless motor, brushless ESC
    • ,
    • Li-Po battery and balanced charger
    • ,
    • Plus many more. See below images for rest of features.
    • ,
    ,

    This is our highest spec electric rc car. Designed with ...

    NitroTek

    FIRE WOLF ELECTRIC BRUSHLESS RC BUGGY

  • Width
  • 187mm
  • Height
  • 108mm
  • Length
  • 232mm
  • Track
  • 126mm
  • Wheelbase
  • 177mm
  • Gear ratio
  • 10.86
  • Tyres
  • 70mm
  • Ground clearance
  • 18mm
  • Transmitter
  • 2ch FM

      ,
    , ,
      ,
    • Fully assembled ready to run
    • ,
    • High speed model - 40+ Mph
    • ,
    • Fully ball raced
    • ,
    • Powerful brushless motor
    • ,
    • 11.1v Li-po battery
    • ,
    • Front/rear metal differentials
    • ,
    • Aluminium drive shafts
    • ,
    • Sway bar as standard
    • ,
    • Adjustable camber
    • ,
    • Adjustable oil filled shocks
    • ,
    • Highly adjustable for race tuning
    • ,
    • 4WD shaft driven system
    • ,
    • Slipper system
    • ,
    • Aluminium chassis
    • ,
    ,

    There is only one way to best describe this brushless ...

    NitroTek

    1/16 PANZERKAMPFWAGEN WITH SMOKE AND SOUND

  • Storage Capacity
  • 40 BB's 
  • Length
  • 36.5 cm
  • Width
  • 18.5 cm
  • Height
  • 20 cm
  • Climbing Gradient
  • (Changeable on different road surfaces) Apr. 35-degree

      ,
    • Scale: 1:16
    • ,
    , ,
      ,
    • Built in realistic smoke generator
    • ,
    • Highly detailed realistic model
    • ,
    • Demonstration mode
    • ,
    • Frequencies can be changed so multiple tanks can be used together
    • ,
    • Super chassis, realistic suspension system, rubber covered wheels, pre-assembled tracks 
    • ,
    • A realistic commander is included
    • ,
    • Rotating turret
    • ,
    • Gun can be moved 30 degrees up and down
    • ,
    • Full control of tank movement - forward, backward, rotate left and right
    • ,
    • Many sound effects - Emulation music, motor start-up sound, Engine sound, machine-gun sound, Cannonball sound
    • ,
    • Adjustable sound
    • ,
    ,

    This fantastic scale rc replica from Heng Long looks great ...

    NitroTek

    COPTERX SE V2 PRO RC HELICOPTER - KIT VERSION

  • Length
  • 650mm
  • Height
  • 230mm
  • Main Rotor
  • 700mm
  • Tail Rotor
  • 150mm
  • Motor Gear
  • 13T/11T
  • Main Gear
  • 150T
  • Autorotation Tail Drive Gear
  • 106T
  • Tail Drive Gear
  • 25T
  • Weight(without power system)
  • 354g
  • Weight(including power system)
  • 690g

      ,
    • Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24
    • ,
    , ,
      ,
    • CNC & Carbon Construction
    • ,
    • Auto-Rotation System
    • ,
    • Rear Tail Servo Mount
    • ,
    • Collective Pitch System
    • ,
    • Tail Rotor Drive Belt System
    • ,
    • Main Drive Gear with Cooling Fan
    • ,
    • Professional Servo Control Lever Design
    • ,
    ,

    The CopterX CX 450 V2 Superior Edition (eCCPM) represents the ...

    NitroTek

    P51D WWII MUSTANG BRUSHLESS 4CH RC PLANE 2.4G

  • Wing span
  • 870mm 
  • Length
  • 730mm 
  • Flying weight
  • 405g 
  • Battery
  • Li-Po 11.1V-1000mAh 
  • Power
  • C2410 brushless motor 
  • Control
  • 4CH 2.4G RC system 3 servos 25A brushless 
  • ESC Range
  • 1000 feet

      ,
    , ,
      ,
    • 4 CH Full RC - Aileron, Elevator, Rudder, Throttle
    • ,
    • 2.4Ghz radio equipment
    • ,
    • Full aerobatic characteristics 
    • ,
    • Powerful brushless motor and Li-Polymer battery
    • ,
    • Excellent stability
    • ,
    • Ready to Fly in Just Minutes!
    • ,
    • Super tough
    • ,
    • Lightweight
    • ,
    • Shock Resistant Fuselage
    • ,
    • Strong Wings
    • ,
    • Pre-installed Electronics 
    • ,
    • Suitable for beginners and experts
    • ,
    • Only required 8 AA batteries for the transmitter to start flying
    • ,
    ,

    This P-51D Mustang features a powerful brushless motor setup and ...

    NitroTek

    SONIC 185 BRUSHLESS 4CH 2.4G BRUSHLESS RC GLIDER

  • Wing Span
  • 1850mm
  • Length
  • 1090mm
  • Weight RTF
  • 980g
  • Electric Motor
  • Brushless 200W
  • Battery
  • 7.4V 1800mAh 15C Li-Po
  • ESC
  • 35A
  • Radio
  • Dynam 4Ch 2.4 GHz ,

      ,
    • 4 Servos (9g)
    • ,
    , ,
      ,
    • Sonic 185 4CH Remote Control Plane 
    • ,
    • Brushless 200W Motor 
    • ,
    • 4-CH FM Transmitter Receiver
    • ,
    • Motor, ESC, and 4 Servos pre-installed 
    • ,
    • Mains Power Supply for charger
    • ,
    • Automatic Li-Po Balance Charger 
    • ,
    • High power Li-Po battery 7.4V–1800mAh
    • ,
    ,

    The Sonic 185 is an excellent choice of plane for ...

    NitroTek

    EZ HAWK ELECTRIC 3CH RTF BRUSHLESS TRAINER PLANE

  • Wing span
  • 1370mm
  • Length
  • 870mm
  • Weight
  • 680g
  • Charger
  • 3 Cell Li-po balance charger
  • Servos
  • 9g micro servos (3pcs)
  • Battery
  • 11.1v 1250mah Li-Po battery

      ,
    • 2.4GHz Receiver and Transmitter
    • ,
    , ,
      ,
    • EZ Hawk plane inc. undercarriage and prop
    • ,
    • Electronic Speed Controller
    • ,
    • Dynam Speed 400 Brushless Motor 
    • ,
    • 2.4 GHz Radio Gear
    • ,
    ,

    Dynam's EZ Hawk plane with its brushless motor is the ...

    NitroTek

    A-10 THUNDERBOLT II RTF 4CH RC BRUSHLESS SCALE MODEL JET 2.4G

  • Wing span
  • 872mm
  • Length
  • 968mm
  • Flying Weight
  • 450g
  • Drive
  • Twin brushless motors 1200KV
  • Speed Controller
  • 25A brushless ESC
  • Servo
  • 3x10g
  • Battery
  • 11.1V 15C 1500MAH Li-Po
  • Charger
  • Li-Po balance charger
  • Control
  • 4 CH 2.4GHz Radio Tx and Rx

      ,
    , ,
      ,
    • 4 CH Full RC - Aileron, Elevator, Wheel, Throttle
    • ,
    • Upgraded 2.4Ghz Radio Equipment
    • ,
    • Twin Brushless Motors
    • ,
    • Full aerobatic characteristics 
    • ,
    • Powerful brushless motors
    • ,
    • Excellent stability
    • ,
    • Ready to Fly in Just Minutes!
    • ,
    • Super tough & Lightweight
    • ,
    • Shock Resistant Fuselage
    • ,
    • Pre-installed Electronics 
    • ,
    • Suitable for beginners and experts
    • ,
    • Only required 8 AA batteries for the transmitter to start flying
    • ,
    • 10-15 minutes flight time
    • ,
    ,

    The A-10 Thunderbolt II (Warthog) comes with all electronics and ...

    NitroTek

    JAGUAR 3CH MILITARY J3 PIPER CUB RC PLANE

  • Wing span
  • 955mm
  • Length
  • 730mm
  • Weight
  • 640g 
  • Battery
  • 8.4v-650mAh NI-MH
  • Power
  • 380 brushed motor
  • Flying weight
  • 450g
  • Flying time
  • approx. 15 mins
  • Flying height
  • approx. 300m
  • Range
  • 500m

      ,
    • 4 channel TX
    • ,
    • 6 channel RX
    • ,
    • 2*9g servo,
    • ,
    • 1*25A brush ESC 
    • ,
    , ,
      ,
    • Millitary USAF Livery
    • ,
    • Can take off from the ground or hand
    • ,
    ,

    This Jaguar is a Piper Cub based remote control plane, ...

    NitroTek

    HAWK SKY 4CH BRUSHLESS SPORT TRAINER PLANE - 2.4GHZ

  • Wing span
  • 1370mm 
  • Length
  • 917mm 
  • Fuselage length
  • 870mm
  • Weight
  • 600g 
  • Wing area
  • 22.8dm2
  • Charger
  • 3 Cell Li-po charger 
  • Transmitter
  • 4 Ch
  • Receiver
  • 5CH receiver 
  • Servos
  • 8.4g micro servos (4pcs) 
  • ESC
  • Brushless Electronic Speed Controller

      ,
    , ,
      ,
    • Hawk Sky plane inc undercarriage and propeller
    • ,
    • Dynam 3 Cell standard Li-po charger 
    • ,
    • Brushless Electronic Speed Controller 
    • ,
    • Dynam Speed 400 Brushless Motor
    • ,
    ,

    Dynam Hawksky with its brushless motor is the perfect trainer ...

    NitroTek

    F-5E SWISS TIGER 64MM EDF 4CH RC JET - 2.4GHZ

  • Wingspan
  • 532mm
  • Length
  • 939mm
  • Flying Weight
  • 500g
  • Wing area
  • 7dm²
  • Wing Load
  • 70g/dm²
  • Radio System
  • 4Ch Tx and 6 Ch Rx ,
  • Battery
  • 1300Mah, 11.1V.
  • Range
  • 1000m

      ,
    • Five 9 gram servos
    • ,
    • 64MM Ducted fan
    • ,
    • Brushless motor and 25A ESC
    • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
    • ,
    • 90% assembled
    • ,
    • Pre-installed electrics
    • ,
    • CAD engineering quality
    • ,
    • Stunning paintwork
    • ,
    • Capable of over 90mph
    • ,
    • 64mm electric ducted fan
    • ,
    • State of the art components
    • ,
    • 2.4G Transmitter 
    • ,
    • Can perform amazing aerobatics
    • ,
    • Is capable of the 'Cobra Manoeuvre'
    • ,
    • Approx 15min flight time
    • ,
    ,

    The real F-5E fighters were used by the Patrouille Suisse, ...

    NitroTek

    F-4E PHANTOM II 64MM 4CH RC EDF FIGHTER JET - 2.4GHZ

  • Wingspan
  • 542mm
  • Length
  • 788mm
  • Flying Weight
  • 540g
  • Wing area
  • 8dm2
  • Wing Load
  • 67g/dm2
  • Radio System
  • 4Ch Tx and 6 Ch Rx ,
  • Battery
  • 1300Mah, 11.1V
  • Range
  • 1000m

      ,
    • Four 9 gram servos
    • ,
    • 64mm Ducted fan
    • ,
    • Brushless motor and 25A ECS
    • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
    • ,
    • Pre-installed electrics
    • ,
    • CAD engineering quality
    • ,
    • Stunning paintwork
    • ,
    • 64mm electric ducted fan
    • ,
    • State of the art components
    • ,
    • 2.4G Transmitter 
    • ,
    • Can perform amazing aerobatics
    • ,
    • Is capable of the 'Cobra Manoeuvre'
    • ,
    ,

    The F-4E Phantom II is a tandem two-seat, twin-engined, all-weather, ...

    BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby