Skip to content

ReadyMadeRC

IFTRON - STINGER PRO 5.8GHZ 25MW AV TRANSMITTER

Item Description Our new Lower Power Nano 5.8 transmitters conform with the power requirements of many countries that limit the RF power to 25mw. Features include: on-board switching power for ultra-wide input voltage, plus one line-level audio input- all at a very economical price. Want more power and features? Please see our Mondo Stinger 5.8 or Stinger Pro 8.5 transmitters. Comes with whip antenna Audio cable and one of these Plug & Play Power/video Cables (See picture below) If you already have a camera that uses a 3 pin connector, please check the connector picture for wiring compatibility with your camera. If your camera is opposite of ours, please ask for a "REVERSE" cable when ordering or you will have to reverse it yourself. All Iftron Transmitters are Urethane Conformal Coated for moisture protection. Comes with antenna and input cable. Made in USA Lead Free Wiring and Information Here,

Channel 1 5.740GHz Channel 2 5.760 GHz Channel 3 5.780 ...

ReadyMadeRC

PENGUIN V2 KIT +M2815 MOTOR (HARDWARE INCLUDED, NO ELECTRONICS)

Wingspan1720MM/67.7inch
Length1230MM/48.5inch
Wing Area36dm/3.9ft2 (Mainwing Area)
MotorBrushless motor M2220 Kv1350 or M2815 KV1280
ESC40A for M2220 or 60A for M2815
Servo3pcs 17g servo+ 1pcs 9g servo.
BatteryLi-Po 11.1V 2400 mAh for M2220 and  5000mAh for M2815
Static ThrustMotor M2220 1.5Kg/53.0oz.
Payload600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight)
MaterialEPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe
Part NoFUP1201
17gServo3PCS/ 9g servo
Propeller 90601PCS
Part NoFUP1202
Part NoFUP1203
Part NoFUP1204
Part NoFUP1205
17gServo3PCS/ 9g servo
Propeller 90601PCS

ARF Weight:   0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices, Forum Discussions:, , WANT A CAMERA PAN/TILT SYSTEM? Our pan/tilt units will drop right in to our version of the Penguin using the included wood base mount.  There are a few choices sold separately:, , Penguin Packages Available:, , Finwing Penguin Features:, , Airplane flight video please visit:, www.youtube.com/user/Finwingtube, More high definition photos visit:, www.flicker.com/photos/finwing,

Penguin Kit +M2815 Motor Motor M2815 1.95kg/69oz, Max.flight weight more ...

ReadyMadeRC

IFTRON - YELLOWJACKET 5.8 PRO DIVERSITY RECEIVER WITH USB DVR

NoteYou Must Install these Drivers BEFORE you plug in the USB!

BONUS: The receiver can be powered directly from the computer - right through the provided USB cable, or from an external battery!, :, , :, , Size:, , Weight:, , Input Voltage:, , Input Power:, , Antenna Inputs:, , RF Sensitivity:, , Video Output:, , Dual Audio Outputs:, , Microphone Input:, , Microphone Volume:, , Output Connection:,

Take a good look at tomorrow! Our newest diversity receiver ...

ReadyMadeRC

HIMAX 2815-2000 BRUSHLESS INRUNNER-SKY SURFER,EASYSTAR,TWINSTAR

,

• Designed as direct replacement for Speed 400/480 can motors ...

ReadyMadeRC

IFTRON - YELLOWJACKET 5.8 PRO DIVERSITY RECEIVER

:, , Receiver Frequencies (GHz):, 5.740, 5.760, 5.780, 5.800, 5.820, 5.840, 5.860, :, , Size:, , Weight:, , Input Voltage:, , Input Power:, , Dual Video Outputs:, , Dual Audio Outputs:, , Microphone Input:, , Microphone Volume:,

Item Description YellowJacket 5.8 Pro is the latest innovation from ...

ReadyMadeRC

QAV500 FPV QUADCOPTER FRAME V1.2

NOTELanding Gear not included!
Details The QAV500 version 1.2 is a purpose built FPV ...

ReadyMadeRC

FLAT ADHESIVE MOUNTS

* WarrantyOne Year

What's Included:, * 5 Flat, 3M Adhesive Mount, Restrictions:, Sales of the GoPro equipment from my store are restricted to the United States only.,

This is the same mount already included with many HERO ...

ReadyMadeRC

MULTIPLEX EASY STAR 2 ADJUSTABLE ALUMINUM MOTOR MOUNT

Position 1stock height up to a 7" prop.
Position 2(+) 0.41" for up to a 8" prop.
Position 3(+) 1.0" for up to an 9" prop.
Total Weight16g

Three step installation:, Attach motor base plate to the stock plastic mount with 4 supplied pan head screws., Included:, 1 - EBS 2 Base Plate and EBS Motor Plate, 4 base screws, 4 motor screws, and 4 mount screws., Notes:, - The stock folding spinner can be utilized with different sized props and motosr with a 3mm or 3.17mm motor shaft.,

This CNC machined aluminum two piece mount is designed to ...

ReadyMadeRC

ANODIZED ALUMINUM MOTOR EXTENSION PLATES FOR DJI FW550 SET OF 6

Features:,

Motor extension plates for DJI Flame Wheel F550. These CNC ...

ReadyMadeRC

VAS - 1.3 GHZ CLOVERLEAF ANTENNA (RHCP) SIDE FEED

Gain1.25dbic
Beam360 degree doughnut
PolarizationRHCP
Rejection9db

Radiation pattern:,

This amazing creation is built by Alex Greve (IBCrazy). The ...

ReadyMadeRC

FATSHARK CCD KILLER CMOS (NTSC)

Shrinktubinggnd
Greenvideo
Whiteaudio Left
Blackaudio Right

Wiring:, , Starting from the red wire:, , Red: 5V, Sample videos using CCDKiller with an ImmersionRC 500mW TX:,

420 TVL “CCD Killer” CMOS on Pan/Tilt Performance that rivals ...

ReadyMadeRC

5.8 GHZ CLOVERLEAF WHIP ANTENNA (RHCP) (SINGLE, STRAIGHT)

http//www.rcgroups.com/forums/showpost.php?p=18484051&postcount=786

ATTENTION: It has come to my attention that there is a minor, fixable incompatibility with some Airwave based receivers.  The standard 5.8GHz receivers may require a minor modification to fix a problem where the receiver tries to put a small DC bias voltage on the antenna.  Please see this forum thread post for the (relatively easy) fix:, , Radiation pattern:,

This amazing creation is built by Alex Greve (IBCrazy). The ...

ReadyMadeRC

RMRC - 1.3GHZ 150MW TRANSMITTER - INTL VERSION

CH11258 MHz
CH21280 MHz
CH31320 MHz
CH41360 MHz
Power requirements12V, 200mA
Weight22g (transmitter and antenna, no cables)

Frequencies:, , NOTE:  THESE TRANSMITTERS MAY ONLY WORK PROPERLY WITH THE STOCK ANTENNA.  The transmitters are tuned at the factory using these antennas, and non-stock antennas may change the feedback the transmitter receives, which may cause the transmitter to operate on the incorrect frequency.  In testing the power output of these units vary from about, Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

Now includes three of the the original frequencies, along with ...

ReadyMadeRC

900MHZ 800MW* TRANSMITTER - INTERNATIONAL VERSION

Weight with case and antenna3.4oz.

High quality 800mW* 900MHz transmitter.  Not the cheap copies available on eBay and from other overseas sources.  Although the manufacturer calls this an 800mW transmitter, and other retailers sell it stating it's that power level, they actually put out a measured 650mW of power (including the ones from the other vendors).  We take the time to verify the ratings from the manufacturers.  Do the other dealers? :), Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

Comes with heat sink as shown, which can be removed ...

ReadyMadeRC

DRAGONOSD+ V2 COMBO: OSD, CURRENT SENSOR, AND GPS

This package includesDragon OSD V2

NOW AVAILABLE: CUSTOM CABLE ADAPTERS TO ALLOW YOU TO PLUG THE DRAGONOSD+ DIRECTLY IN TO THE READYMADERC CABLE SYSTEMS.  POWERS YOUR DRAGONOSD THROUGH THE VIDEO SYSTEM TOO!  AVAILABLE, *Note: will be shipped with the Deans style t-connectors included, but not soldered on.  This will allow users of other connections to easily solder on their own connectors.,

The Dragon OSD+ v2 is the newest analog OSD from ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby