HobbyWireless
TOROIDAL FERRITE RING 12.5MM (0.49") COATED NOISE SUPPRESSOR
| Outside diameter | 0.492 inch |
| Inside diameter | 0.295 inch |
Details:, This Toroid Ferrite is great for suppressing EMI/RFI.,
This ring is coated with a tough layer of epoxy ...HobbyWireless
SINEWINDER R/C LIGHTING SYSTEM
| Input voltage | 3V to 6V |
| Current draw | 30mA max |
Details:, , Description:, , :, ,
Sinewinder is an attractive, easy to use lighting system for ...HobbyWireless
RSSI METER
| Supply Voltage | 7 - 14VDC / 10mA |
| Min RSSI Voltage | 0.0VDC |
| Max RSSI Voltage | +5.0VDC |
| RSSI Scaling | User configurable |
| RSSI Impedance | ~57K ohms |
| Character Height | Large 0.5-inch (12.7 mm) |
| Display Type | LCD (daylight visible / high contrast) |
| Dimensions | 1.8 x 1.4 x 0.25 inches (45 x 35 x 6 mm) |
| Weight | 6 grams |
Details:, The RSSI (relative signal strength indication) Meter displays a video receiver's analog signal strength as a 0-100% value. It is compatible with popular ham radio and wireless video receivers. Its large easy-to-read numeric LCD and simplified installation makes this a very exciting receiver mod!, Connection to your receiver requires three wires: Power, Ground, and RSSI signal. A simple push-button interface allows fast and easy signal strength calibration., Specifications/Features:, , Instructions Manual:, Click Here!,
The meter is fully assembled and includes a front panel ...HobbyWireless
RSSI BUFFER FOR OSD PRO
| Operating Voltage | 5VDC (powered by EagleTree eLogger). |
| Current Draw | 2 milliamps. |
| RSSI Voltage Range | 0 - 4.0 VDC. |
| RSSI Input ohms | > 1 megohms (DC). |
| Input Impedance | 330K ohms (AC). |
| Size/Weight | 0.45 x 0.73 inches (11 x 19 mm), 2 grams. |
| Operating Voltage | 5.0VDC (4.5 - 5.5 VDC allowed). |
| Current Draw | 2 milliamps. |
| RSSI Range | 0 - 4.0 VDC. |
| RSSI Input ohms | > 1 megohm. |
| RSSI Impedance | Input IN1 = 330K ohms @ 1KHz. |
| Size/Weight | 0.45 x 0.73 inches (11 x 19 mm), 2 grams. |
| can be used with other OSD designs if the 3-wire cable’s pinout is observed, as follows | Black Wire |
| Red Wire | Buffered RSSI signal output (to OSD) |
| White Wire | Not Used (no connection) |
Details:, The RSSI Buffer is a tiny-sized accessory that is used to connect a R/C receiver's analog RSSI (relative signal strength indication) signal to the EagleTree eLogger V3 / OSD Pro system. It uses the TEMP1 input on the eLogger V3 telemetry module., Specification and Features:, Installation Instructions:, Click Me!, Installation Video:, Click Me!, Cable Pin-Out Information:, , Note:, Common circuit ground is provided by the IN1 or IN2 signal ground connection. Please,
This RSSI buffer is recommended for all EagleTree OSD-Pro installations ...HobbyWireless
MINI LIPO BATTERY VOLTAGE METER 1S-8S DUAL ALARM BUZZER
| * Size | 14mm x 39mm x 10mm |
| * Input Voltage | 0.01V-4.5V per cell |
| * Precision | 0.03V |
| * Weight | ~5.0g |
| * LED Voltage | Individual Display of Voltage one cell by one |
| * Empty Voltage | 3.70V/cell |
| * Full Voltage | 4.20V/cell |
| * Compatible Battery Types | Li-Po - Li-On - Li-Mn - Li-Fe |
Details:, This 5g little meter is a great tool capable to show the status of your battery pack, cell by cell. It will alert you when you battery voltage is too low, or when you have a faulty cell with an accuracy of 0.03V., * Display :, 3 digit LED Segment Display,
It can also indicate the total voltage in the battery ...HobbyWireless
LVBOOST - BOOST CONVERTER
Details:, LVBoost is a boost converter that can take voltages as low as 0.5V and convert them into higher, more useful voltages like 3.3V or 5V. It has an exceptionally low quiescent draw - typically under .4mA. these features make LVBoost a great choice for powering projects from solar or other renewable energy sources., Model:, , Specifications:, , Applications:,
From a 3V input, 500mA @5V out is easily achievable, ...HobbyWireless
INTELLIGENT LITHIUM CUTOFF
| Input voltage | 1s to 12s Lithium or Lithium Polymer |
| Cutoff voltage | 3.0V/cell |
| Weight | 3.5g/.13oz |
Details:, LipoShield is a low voltage cutoff device which enables any ESC to be used with lithium battery packs. It installs easily between your receiver and ESC and provides a reliable 3.0V per cell soft cutoff to prevent over-discharge damage to your expensive lipo packs., Model:, , Specifications:, , Applications:, , Instructions:,
LipoShield is a soft cutoff, so it is appropriate for ...HobbyWireless
GOLD BULLET CONNECTOR SET,3.5MM (3) BY E-FLITE
| * Size | 3.5mm |
Details:, , Description:, * For serious enthusiast,
* High performance, up to 70 Amps * 24K goldplated, ...HobbyWireless
ELRC EASY LIGHTS R/C CONTROLLED
| Input voltage | 3.6V to 8.4V |
| Current draw | 80mA max |
| Wire length | 24in / 61cm |
Details:, EasyLights kit is an attractive and easy to use lighting system, Model:, , Specifications:, , Applications:,
for your R/C vehicle. Just plug the kit into a ...HobbyWireless
AUTO-RANGING DIGITAL MULTIMETER 33 SERIES
| Battery Type | Alkaline |
| Product in Inches (L x W x H) | 5.25 x 1.75 x 10.25 |
Details:, ,
The multi-meter is a general-purpose instrument designed for use not ...HobbyWireless
ASR-10 - ADJUSTABLE SWITCHING REGULATOR
Details:, The ASR-10 is the adjustable version of our step down voltage regulators. It is designed to be the easiest possible way to add an adjustable voltage source to a new or existing project with all the efficiency benefits of switch-mode power. The ASR-10 is pin-compatible with the common 78XX family of linear voltage regulators, and has a small screw on top that allows you to change the output voltage as your project evolves. It has integrated decoupling capacitors, so external capacitors are not generally necessary., Model:, , Performance:, , Applications:,
ASR-10 can deliver a maximum of 10 Watts. The screw ...HobbyWireless
ALIGN HEXAGON SCREW DRIVER SET (4 PCS)
Details:, , Description:,
ALIGN HEXAGON SCREW DRIVER SET (4 PCS) ●Super hard screwdriver ...HobbyWireless
TSLRS V6 PRO UHF TRANSMITTER - INCREASES THE RANGE OF RC RADIOS
| RF Power output | 0.5W or 1W or 2W. The 2W setting can now be used as long as you like. use selectable |
| Supply Voltage | 6-25V using internal switchmode converter also included inside the nice aluminium |
| Supply current | depends on input voltage, but input power is 3 times RF out power |
| Spurs | < 60dB and 80dB under carrier, improved new double low pass filter |
| Temperature range | -40C to +70C tested |
| Hitech Aurora 9, take out normal RF module and use module pins from left | 1=ppm, 2=supply, 3=GND (4 and 5 are not used) |
Details:, The New PRO version released Feb2012 is a improved version of the V5., Includes:, 1x Transmitter PRO V6 0.5-2W 433Mhz built in regulator,
New radio system, still compatible with older versions rx With ...HobbyWireless
TSLRS 433 MHZ 12 CHANNELS DIVERSITY RECEIVER - LONG RANGE
| Sensitivity | -113dBm to -114dBm IMPROVED NEW LNA with less noise factor. |
| Input voltage range | 4-6V (rx uses 134mA at 5V) |
| Servo signal pulse output | 3.3V positive |
| Radio band | 433 & 444Mhz multi band and multi frequency hopping system. |
| Temperature range | -40C to +70C tested |
Details:, , The receiver board is 34 mm width, 53mm long, (8mm longer when angled connector option as shown) 12mm height, weight: 19.4 gr.,
Improved input filter , now even better attenuation for 900 ...HobbyWireless
BARE WIRE ADAPTER FOR TSLRS V6 TX
Details:,
High quality cable wire with military grade adapter for connecting ...