Hobby-Lobby
30MM ALUMINUM SPINNER FOR 2.3MM SHAFT
Lightweight (10 gram) precision spinners turned from aluminum bar stock. Each includes: turned aluminum spinner, middlepart yoke, screws for prop blades and collet type motor shaft adapter. The width between the arms of the prop yoke is 6mm and the prop pin diameter is 2mm. Fits Graupner CAM folding props with 6mm wide bases.,
Precision turned aluminum spinner with blade holders and collet prop ...Hobby-Lobby
50MM PROP- 4MM THREAD
Very rigid black fiberglass-filled high pitch nylon props made only for racing boats. There are two types: props to fit the 4mm Graupner shafts and props to fit 3/16" "Drive Dog" shafts (as used by Octura and others). Use GR2321 Drive Dog to adapt these to Graupner 4mm shafts.,
M4 propsHobby-Lobby
40MM PROP- 4MM THREAD
Very rigid black fiberglass-filled high pitch nylon props made only for racing boats. There are two types: props to fit the 4mm Graupner shafts and props to fit 3/16" "Drive Dog" shafts (as used by Octura and others). Use GR2321 Drive Dog to adapt these to Graupner 4mm shafts.,
M4 propsHobby-Lobby
35MM PROP- 4MM THREAD
Very rigid black fiberglass-filled high pitch nylon props made only for racing boats. There are two types: props to fit the 4mm Graupner shafts and props to fit 3/16" "Drive Dog" shafts (as used by Octura and others). Use GR2321 Drive Dog to adapt these to Graupner 4mm shafts.,
M4 propsHobby-Lobby
55MM PROP-3/16" DRIVE DOG
Very rigid black fiberglass-filled high pitch nylon props made only for racing boats. There are two types: props to fit the 4mm Graupner shafts and props to fit 3/16" "Drive Dog" shafts (as used by Octura and others). Use GR2321 Drive Dog to adapt these to Graupner 4mm shafts.,
3/16" Drive Dog PropsHobby-Lobby
52.5 PROP-3/16" DRIVE DOG
Very rigid black fiberglass-filled high pitch nylon props made only for racing boats. There are two types: props to fit the 4mm Graupner shafts and props to fit 3/16" "Drive Dog" shafts (as used by Octura and others). Use GR2321 Drive Dog to adapt these to Graupner 4mm shafts.,
3/16" Drive Dog PropsHobby-Lobby
50MM PROP-3/16" DRIVE DOG
Very rigid black fiberglass-filled high pitch nylon props made only for racing boats. There are two types: props to fit the 4mm Graupner shafts and props to fit 3/16" "Drive Dog" shafts (as used by Octura and others). Use GR2321 Drive Dog to adapt these to Graupner 4mm shafts.,
3/16" Drive Dog PropsHobby-Lobby
45MM PROP-3/16" DRIVE DOG
Very rigid black fiberglass-filled high pitch nylon props made only for racing boats. There are two types: props to fit the 4mm Graupner shafts and props to fit 3/16" "Drive Dog" shafts (as used by Octura and others). Use GR2321 Drive Dog to adapt these to Graupner 4mm shafts.,
3/16" Drive Dog PropsHobby-Lobby
40MM PROP-3/16" DRIVE DOG
Very rigid black fiberglass-filled high pitch nylon props made only for racing boats. There are two types: props to fit the 4mm Graupner shafts and props to fit 3/16" "Drive Dog" shafts (as used by Octura and others). Use GR2321 Drive Dog to adapt these to Graupner 4mm shafts.,
3/16" Drive Dog PropsHobby-Lobby
35MM PROP-3/16" DRIVE DOG
Very rigid black fiberglass-filled high pitch nylon props made only for racing boats. There are two types: props to fit the 4mm Graupner shafts and props to fit 3/16" "Drive Dog" shafts (as used by Octura and others). Use GR2321 Drive Dog to adapt these to Graupner 4mm shafts.,
3/16" Drive Dog PropsReadyMadeRC
AEROSIM RC FLIGHT SIMULATOR
| http | //vimeo.com/11409098 |
| http | //www.youtube.com/watch?v=lMVr1nE58WU |
| http | //www.youtube.com/watch?v=g110XcnWwFY |
| There are two Training Programs | (1) Airplane, and (2) Helicopter/Multicopter. |
The USB interface is fitted with a 3.5 mono jack that can be directly used with JR/Spektrum/HitecAurora/Turnigy/GraupnerMX. An adapter is required for other transmiters (sold separately), consisting on a short cable with a female 3.5 mono jack on on one end, and the right type of connector for the particular transmitter on the other end. Available connectors include: Futaba Square Plug, DIN6 for Futaba Round Plug and Hitec, Multiplex (DIN5, compatible with DIN7 and DIN8), Graupner with Trainer Socket (jack 3.5mm stereo), and ESky/WFly/Storm (minDIN4)., Please, watch these simulated FPV videos:, FPV flight:, This is the video created by Holger, showing the performance of the MK models in the simulator:, Here is the MK promotional video:,
Description This high quality RC flight simulator includes a CD ...HiModel
FEIYU INERTIAL ATTITUDE STABILIZER FY-30A
| ● Mode 1 | FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is |
| ● Mode 2 | 3D Control Mode. In this mode, the stabilizer utilizes its 3-axis gyroscope to |
| ● Mode 3 | self-balancing mode. In this mode, the FY-30A will automatically command the |
, , , , , , Specifications:, , , , , , , , , , , Applications, The FY30A can be used in the following fixed wing models:, · Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, · Flying wings with rudder;, · Flying wings with no rudder;, · Airplanes with no ailerons (rudder and elevator only), · V-tail airplanes with ailerons;, · V tail airplanes with no ailerons, · Any other configuration, please email us for consultation - feiyudz@yahoo.cn., Remote control system:, The FY-30A has been tested to work well with the following RC system:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, · Graupner / JR PPM 8, PPM 12, SPCM mode;, · MPX PPM8, PPM 12 with UNI mode, · any other system with a neutral position of 1.5 ms (standard remote control device)., FY-30A OperatingMode, The FY-30A can be operated in three flight modes modes:, turned off. The aircraft is completely under the control of the pilot., sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle, position) the FY30A will hold the current aircraft attitude. This prevents rolling of the, aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be, easily maneuvered to complete a variety of 3D flight with added stability and smoothness., aircraft control surfaces to maintain level flight at all times., The instruction to change the FY30A flight modes is via a spare channel on the RC receiver., , ,
Features: FY-30A is an inertial attitude measurement instrument used for ...2 Reviews
HiModel
FY-91Q MULTI-ROTOR FLIGHT STABILIZATION & AUTOPILOT SYSTEM
, , , , , , Specifications:, , , , , , , , , , , FY-91Q Module, Operating voltage ：4.0~6.0 Volt, Current consumption ：50mA (5V input), Dimensions ：55 x 33 x 20 mm, Weight (not including wires) ：20g, Operating Temperature ：-25°C~ +70°C, The maximum allowable rotation rate ： 3 rotations per minute, APPLICABLE AIRCRAFTMODELS, The FY91Q can be installed and flown it the following multi-rotor aircraft:, - 4 motored quadcopters;, - Tri-axial rotory aircraft with 6 motors, - Six-axial multi-rotor aircraft (6 motors), REMOTE CONTROL SYSTEM COMPATIBILITY, FY-91Q have been tested to work with the following RC systems:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, · Graupner/JR PPM 8, PPM 12, SPCM mode；, · MPX PPM8, PPM 12 with UNI mode, · Any remote control system using the standard of 1.5 ms neutral position., , ,
Features: THIS IS FY91Q MODULE ONLY, THE GPS & COMPASS ...HiModel
2.4G CORONA FHSS 8-CHANNEL RF MODULE & RX SYSTEM FOR JR TRANSMITTER (RF CT8J FHSS, RX CR8F) V2
, , , , , , Specifications:, , , , , , , , , , , Type, , CT8J/FHSS, , Size, , 63.9X48.5X36.5mm(2.51"x1.9"x1.43"), , Weight, , 34.9g, , Output Power, , , Working Voltage, , 6V-13V, , Working current, , 100mA, , Resolution, , 1024, , Compitability, , JR:347,388,783,U8,PCM10,PCM10S,PCM10SX,PCM10IIS,8103,J9303,MX-22,MX-24S,PX,9XII Graupner:MC16, , , ,
Includes/Requires: Includes: 1 x JR compatible RF module 2.4G CT8J ...GetFPV
TEAM BLACKSHEEP 750KV MOTORS & ESCS (SET OF 4 MOTORS AND ESCS)
Note: Propellers not included. We suggest Graupner E-Props 9x5 or 10x5 for this drive system. You need 2 clockwise, and 2 counter-clockwise propellers.,
Details These motors and escs are very robust and durable, ...