RCModelScout.

ReadyMadeRC

10HZ GPS EXPANDER MODULE

NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) below is required.,

ReadyMadeRC

DJI FLAME WHEEL F550 ARF KIT INCLUDES MOTORS, ESC & PROPELLERS

Includes:, 6× ESC(30A), 6× Motor(2212), 6× blades(10inch), 1× complete frame, Flame Wheel F550 ARF Kit Includes:, , KV: 920 rpm/V,

ReadyMadeRC

DRAGONOSD+ V2 (MAIN UNIT, NO GPS OR CURRENT SENSOR)

ReadyMadeRC

FATSHARK BASE SD VGA VIDEO GLASSES

package includes:, , specifications:, , Option 2: If you want to share the power supply with your ground station, the included cable allows for that.  You simply feed the power from the 2.1mm barrel connector that normally powers your video receiver/ground station into the included cable, and then plug the extra power plug included on the cable into your video receiver/ground station so you are powering both devices with the same battery.,

HobbyKing

FATSHARK PREDATORV2 RTF FPV HEADSET SYSTEM W/CAMERA AND 5.8G TX

Predator V2 RTF FPV kit includes:•, Specifications:, • FOV 25 degree diagonal, full color VGA resolution LCD display, Recommended accessories:, ImmersionRC 600mW 5G8 transmitter,

ngHobbies

EZUHF 8CH RECEIVER

Notice:, , Dimensions:, , Content of the pacakge:, 1 x EzUHF 8 channel Receiver, Note:, , Documentation:, , Support thread on RcGroups:,

ngHobbies

MICRO 120 DEGREE CMOS CAMERA (PAL)

Specifications:, Scanning type: 2:1 Interlaced, Power: 5V, Connection diagram:, Manual:, none,

ngHobbies

NANO CMOS CAMERA (NTSC)

Specifications:, Scanning type: 2:1 Interlaced, Connection diagram:, Manual:, none,

ngHobbies

MICRO 90 DEGREE CMOS CAMERA (NTSC)

Specifications:, Scanning type: 2:1 Interlaced, Power: 5V, Connection diagram:, Manual:, none,

ngHobbies

ADVANCED FPV PLUG AND PLAY PACKAGE

The Advanced Plug and Play Starter Package:, Fatshark Dominator Base Goggles,

ngHobbies

3D FPV CAMERA

Note from New Generation Hobbies:, We have ground tested these cameras with the manufacturer throughout a 4 hour timeframe, testing all the capabilities, setting different options, changing lenses, and experiencing first hand the 3D effect. We have to tell you the effect is truly amazing, and it is as realistic as it can get with with video goggles. We suggest to have the goggles closed around your eyes for a better 3D immersion experience., Specifications:, Image Sensors:, 1/4" CMOS, Resolution per camera:, 480 lines per camera, Sensitivity:, 3.0V/Lux-sec @ 5600K, S/N Ratio:, 48dB, Weight:, 30gr, Size:, 30x90mm, Lens:, Standard 3.6mm CCD lenses, Voltage:, 5-12V, Current Consumption:, 105mA, Video Output:, NTSC (2D mode) / Field sequential NTSC (3D mode), Documentation:, Click here,

ngHobbies

NANO CMOS CAMERA (PAL)

Specifications:, Scanning type: 2:1 Interlaced, Connection diagram:, Manual:, none,

ngHobbies

GPS-V4 EXPANDER

NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) is required, Manual:, GPS Expander Manual,

ngHobbies

AEROSIM RC TRAINING SIMULATOR

Features:, - Very realistic flight characteristics. The flight performance and physics of the models is very realistic - this usually is found only at a much higher priced simulators., See it in action here:, AeroSIM RC - Simulador Aeromodelismo Radio Control Flight Simulator, Download the trial version:, Click here,

ngHobbies

REMZIBI OSD PACKAGE

Technical Data:, Functionality:, - PC connection for configuration/calibration purposes using dedicated PC program, Button function:, - Save home position (short click), Information currently available on the OSD (additional hardware may be required):, - Latitude (format DDMM.MMMM or DD.DDDDDD can be choosen), Documentation:, English Documentation, Software:, Click here, Support forum:, Click here,