ReadyMadeRC
IFTRON - NANO 5.8GHZ MODULAR RECEIVER
,
Great video for less! You don’t have to lose out ...ReadyMadeRC
HORNET OSD + FY31AP (FY-31AP TRADE EDITION)
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| Operating temperature(Unit | ℃) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
The telemetry data is as below:, , Relative altitude (Unit : m), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following: A. All Information Displayed; B., The modes are shown as below:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , :, GPS module:, The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , Includes:,
Brief Introduction The Hornet- OSD overlays flight telemetry information onto ...ReadyMadeRC
IFTRON - STINGER PRO 5.8GHZ 25MW AV TRANSMITTER
Item Description Our new Lower Power Nano 5.8 transmitters conform with the power requirements of many countries that limit the RF power to 25mw. Features include: on-board switching power for ultra-wide input voltage, plus one line-level audio input- all at a very economical price. Want more power and features? Please see our Mondo Stinger 5.8 or Stinger Pro 8.5 transmitters. Comes with whip antenna Audio cable and one of these Plug & Play Power/video Cables (See picture below) If you already have a camera that uses a 3 pin connector, please check the connector picture for wiring compatibility with your camera. If your camera is opposite of ours, please ask for a "REVERSE" cable when ordering or you will have to reverse it yourself. All Iftron Transmitters are Urethane Conformal Coated for moisture protection. Comes with antenna and input cable. Made in USA Lead Free Wiring and Information Here,
Channel 1 5.740GHz Channel 2 5.760 GHz Channel 3 5.780 ...ReadyMadeRC
FY-41AP-A AIRPLANE STABILIZER, AUTOPILOT, AND ON SCREEN DISPLAY
| FY-41AP firmware for fix-wing V1.22 | Download |
| FY module firmware upgrade software and manual | Download |
| The latest FY-DOS&41AP-SETTING software V1.11 for fix-wing | Download |
| FY-41AP manual for fix-wing | Read online |
| More FY-41AP related downloads | Click in |
| FY-41AP OSD display part firmware V1.22a | Download |
| FY module firmware upgrade software and manual | Download |
| Supported servo output | 50Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 6 channels |
| FY-41AP Module Working Voltage | 5.3V@0.2A( Powered by Power Manager) |
| Air speed senor | 0 ~ 200KM/h |
| Power Manager | 35g(50×24×18mm) |
| Working Voltage Range | Power of battery 7~26V (2S ~ 6S) |
| Measuring current | 0~100A |
| Power for FY-41AP module | 5.3V@2A |
| Power for Video transmission system | 12V@2A |
| Operating Temperature | -10°C ~ 50°C |
Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,
Introduction FY-41AP is an inertial attitude measurement instrument used for ...ReadyMadeRC
ZEISS CINEMIZER HEADTRACKER
| http | //www.inreal-tech.com/ |
ReadyMadeRC
PICO FPV COMBO (5.8 GHZ)
Package Includes:, , Camera Choices:, RMRC Pico V2 Camera (, Antenna Choices:, TrueRC Nano 5.8 RHCP Antenna, Altitude RC 5.8 Transmitter and optional True RC 5.8 Nano Antenna:,
This is a customizable combo for those looking for high ...ReadyMadeRC
FY-91Q NAVIGATION EDITION WITH COMPASS AND GPS
,
FY91Q MULTI ROTOR SYSTEM Basics on how the system works: ...ReadyMadeRC
FY-30A ORANGE INERTIAL FLIGHT STABILIZATION SYSTEM
,
GREAT NEW FEATURE! The FY30A can now also control multi-rotor ...ReadyMadeRC
TINY 5V REGULATOR
IMPORTANT:, This tiny regulator using a LDO chip and converts the voltage difference to "heat". Regulator chip including a thermal shutdown on 125 degree Celsius and it can handle 800mA current easily if you can cool it. We are suggesting to maximum, : 7-18V (2-4S LiPO), : 5 volt, : 500mA nominal 1A ma, : 0.65gr,
This tiny 5volt regulator perfect for your 5volt FPV cameras ...ReadyMadeRC
FY-30A PRO INERTIAL FLIGHT STABILIZATION SYSTEM
| • Any other configuration inquiries, please email us | feiyudz@yahoo.cn. |
| Includes | FY30A module |
FY30A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:, - Level flight – When stabilization is activated, the FY-30A will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY30A can be used in the following fixed wing models:, • Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, RC Radio suitability:, The FY-30A has been tested to work well with the following RC system:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, The FY-30A can be operated in three flight modes modes:, - Mode 1: FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is turned off. The aircraft is completely under the control of the pilot., - Mode 2: 3D Control Mode. In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY30A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness., - Mode 3: Auto Stabilization mode. In this mode, the FY-30A will automatically command the aircraft control surfaces to maintain level flight at all times.,
GREAT NEW FEATURE! The FY30A can now also control multi-rotor ...ReadyMadeRC
FY-901 MULTI-ROTOR FLIGHT STABILIZATION CONTROLLER
| mail us | service |
The FY-901 for multi-rotor copter can be used in the following models:, , :, , The FY-901 has been tested to work well with the following RC system:, , The FY-901Operating Mode for multi-rotor copter supports two flight modes :, , 1: Auto-Stabilization mode., : 3D Control Mode., Gyroscope initialization (re-setting):, , Out of the box, the FY-901 has been fully initialized. However, if the following condition occurs, resetting the gyro is recommended:, , NOTE:,
Introduction FY-901 has integrated three-axis gyro and three-axis accelerometer, which ...ReadyMadeRC
FY-DOS INERTIAL ATTITUDE STABILIZER WITH GPS
INCLUDES:, , IMPORTANT: The GPS receiver uses 5V, and therefore the DOS system outputs 5V to power the GPS receiver. Feiyu GPS receivers made for other models, and most other GPS receivers, use a lower voltage and will be damaged if you connect them to the DOS., New function:, , The latest firmware for Multi-rotor flight system is V2.0 can realize the following functions:, , For more detail:, FY-DoS for multi-rotors control manual,
DoS is an aeromodelling balancing instrument designed for a variety ...ReadyMadeRC
FY-DOS INERTIAL ATTITUDE STABILIZER
Included in this version:, , IMPORTANT: The GPS receiver uses 5V, and therefore the DOS system outputs 5V to power the GPS receiver. Feiyu GPS receivers made for other models, and most other GPS receivers, use a lower voltage and will be damaged if you connect them to the DOS., New function:, , The latest firmware for Multi-rotor flight system is V2.0 can realize the following functions:, ●, For more detail:, FY-DoS for multi-rotors control manual,
DoS is an aeromodelling balancing instrument designed for a variety ...ReadyMadeRC
APPLE LIGHTNING TO MINI HDMI ADAPTER - CINEMIZER
| Adapter dimensions | 1.75" X 2.75" X 0.75" // 2 oz. |
Includes:, HDMI Adapter,
The Apple Lightning to HDMI mini Adapter for cinemizer OLED ...