HobbyWireless
HORNET OSD + FY-31AP FLIGHT STABILIZER SYSTEM, GPS AUTO-PILOT FUNCTIONS
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
Details:, FY-31AP, By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , • FY-31AP module:, , • GPS module:, , The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following:, , The modes are shown as below:,
Attitude Flight Stabilization System (AFSS) 1. Attitude Flight Stabilization System ...HobbyWireless
FY-31AP ATTITUDE FLIGHT STABILIZATION SYSTEM (AFSS)
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
Details:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , GPS module:, , The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:,
1. Attitude Flight Stabilization System (AFSS) FY31-AP is an inertial ...GetFPV
DJI WOOKONG MULTI-ROTOR AUTOPILOT
| Stop Motor | Two provided options to stop motors |
Start Motor: When using WKM, pushing throttle stick before takeoff will not start motors. You have to execute any one of following four Combination Stick Commands (CSC) to start motors.,
Details WooKong-M is a complete flight control system for all ...ngHobbies
250MW 5.8GHZ FATSHARK TRANSMITTER
| Operating Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| Weight | 14 grams |
| Size | 57 x 25mm |
| Input voltage range | 6 - 16 v |
Parameters:, 250mW output power, Content of the package:, 1 x 250mW Transmitter module, Note:, The use and operation of this product in Canada and United States will require a HAM or Amateur radio license. Please check with your local authorities before purchasing this product.,
The Fatshark 5.8Ghz 250mW transmitter is a state of art ...GetFPV
DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER AND GPS/COMPASS
| Motor Disarm | There are two modes of Motor Disarm |
| VU Input | 7.4V ~ 26.0 V |
| Output(V-SEN port red wire) | 3A@5V |
| (burst current | 7.5A) |
| MAX | 3.15W(0.25A@12.6V) |
| Normal | 1.638W(0.13A@12.6V) |
| Vertical | ±0.8m |
| Horizontal | ±2.5m |
| PMU | 28g |
| GPS | 27g |
| LED | 13g |
| PMU | 39.5mm x 27.5mm x 10.0mm |
| LED | 25mm x 25mm x 7.0mm |
| Note | Flight Performance can be effected by mechanical performance and payloads |
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
Details What's new with the NAZAM V2 Hardware PMU V2 ...GetFPV
DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER
| Motor Disarm | There are two modes of Motor Disarm |
| VU Input | 7.4V ~ 26.0 V |
| Output(V-SEN port red wire) | 3A@5V |
| (burst current | 7.5A) |
| MAX | 3.15W(0.25A@12.6V) |
| Normal | 1.638W(0.13A@12.6V) |
| Vertical | ±0.8m |
| Horizontal | ±2.5m |
| PMU | 28g |
| GPS | 27g |
| LED | 13g |
| PMU | 39.5mm x 27.5mm x 10.0mm |
| LED | 25mm x 25mm x 7.0mm |
| Notice | Flight Performance can be effected by mechanical performance and payloads |
Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
Details New with the V2 - New case design with ...GetFPV
M.I.G. EXTERNAL HEAD TRACKER V5
,
Details The M.I.G. (Magnetic, Inertial, Gyro) head tracker is an ...ngHobbies
FAT SHARK RCV922 V2 AVIATOR BASE EDITION
| Image size | 80" @ 7' |
| Focal distance | 2 meter object focus |
| Supply power | 7-9V |
| Power consumption | 300mA wireless more, 170mA direct mode (No RX) |
| Weight | 200g with battery |
| Color arrangement | vertical stripe |
| Resolution | 922,000 pixels |
| Video signal | NTSC/PAL Autoselecting |
This new version has the followig benefits:, - More eye relief, Note:, The packaging and content of the goggles might be different from the pictures., The Aviator Edition Includes:, RCV922 Base VGA headset, Product Specification:, Optics,
The Fat Shark RCV922 Aviator Base Edition is designed specifically ...ReadyMadeRC
TSLRS TX700 UHF TRANSMITTER
,
More specs to be added as they become available. Tx700 ...GetFPV
FRSKY DELTA 8 2.4GHZ 8CH MULTI-BRAND RECEIVER
| Operating Voltage Range | 3.0V-16V (HV Version) |
| Operating Current | 30mA |
| Specified Range | 1.5km-2.5km |
| Resolution | 3072 |
| Latency | 22ms |
| Number of Channels | 8CH |
| Dimensions | 49mm×24.5mm×15 mm |
| Weight | 9.3g |
Compatible with transmitters that use the following protocols:, Hitec A-FHSS,
Details FrSky's latest all in one receiver, compatible with 3 ...ngHobbies
FATSHARK MIG TRINITY HEADTRACKER
Features:, Built in gyroscopic sensors, Weight:, 150 gr., Documentation:, , Demo Video:,
This MIG headtracker was upgraded to host the new Trinity ...ReadyMadeRC
FAT SHARK ATTITUDESD V2 VGA VIDEO GLASSES
| Note | Battery, charger and adjustable earphones are sold separately. |
| Option 1 | The |
| Option 2 | If you want to share the power supply with your ground station, the |
| Option 3 | Any 2s-3s lipo with a 2.1mm barrell connector like |
| Interpupillary (IPD) distance | 59-69mm (adjustable) |
| Power input | 7-13V (2s/3s supply) |
| Power Consumption @7.4VDC | 200/350mA (direct/wireless) |
| Weight | 150g |
| Power Supply | 7-13V (2s-3s supply) |
| Power consumption | 310mA@7.4VDC |
| Transmitting Power | 250mW |
| Ch1 | 5740, CH2 |
| Weight | 22g with antenna |
Kit includes:, - AtttitudeV2 headset (with integrated 5G8 RX and Trinity HT), Mechanical:, 55x26x11mm, *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
AttitudeSD FPV goggles (VGA, 640X480) with NexwaveRF 5G8 receiver, Trinity ...ReadyMadeRC
EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - XT60
| COMPATIBLE | PCM, SPPM and S.BUS |
| FLEXIBLE | fly with or without your FPV equipment |
| REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| Virtual SPPM RSSI | some receivers output RSSI and link quality via the SPPM interface, which is supported |
has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers. The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU. The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics? The Vector changes all that. WARNING: a full color OSD can be addictive! :) Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3D with or without heading lock, for doing acrobatics when you get bored just flying along. :) Great for holding 3D positio,
The Vector's wiring harness functions perfectly with RMRC camera and ...ReadyMadeRC
EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - WIRE LEADS
| COMPATIBLE | PCM, SPPM and S.BUS |
| FLEXIBLE | fly with or without your FPV equipment |
| REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| Virtual SPPM RSSI | some receivers output RSSI and link quality via the SPPM interface, which is supported |
satellites, in addition to other improvements, which can provide the following benefits:, , has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers. The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU. The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics? The Vector changes all that. WARNING: a full color OSD can be addictive! :) Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3D with or without heading lock, ,
Now includes V2 GPS unit! (Requires GPS firmware v1.81 update ...ReadyMadeRC
EAGLE TREE - VECTOR FPV CONTROLLER PACKAGE - DEANS
| COMPATIBLE | PCM, SPPM and S.BUS |
| FLEXIBLE | fly with or without your FPV equipment |
| REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| Virtual SPPM RSSI | some receivers output RSSI and link quality via the SPPM interface, which is supported |
satellites, in addition to other improvements, which can provide the following benefits:, , Years in the making, the Vector has everything you've dreamed about, in one small, lightweight product:, , In addition to the graphical features shown above, nearly all of the Vector's parameters can be displayed in 3 ways:, , : The Vector can speak flight information to you periodically, or on programmed alarms., Variometers:, The Vector is the first OSD to provide a charting graphical as well as acoustical tone variometers. The variometers are fully programmable to suit your taste., RSSI:, The Vector supports 4 types of RSSI:, , Fast, easy control and menuing system:, The Vector utilizes switch "gestures" and your control stick to let you rapidly scroll through menus and change parameters. All OSD parameters can be configured via the stick menus!, Kitchen sink:, Of course, all the other OSD features you've come to expect from Eagle Tree, such as RADAR, ladders, compass, full 'F16' AHI, flight simulator, manual waypoints, monitoring of up to four battery voltages, and a huge list of parameters available for display are there in the Vector., The Vector system includes the base controller unit, the GPS/Magnetometer, and the Current Sensor/PSU. The Vector's feature list is quite long, so what follows is an overview of the main features:, Full Color OSD, Smooth, razor sharp color graphics:, tired of staring at hard to read white text with clunky graphics? The Vector changes all that. WARNING: a full color OSD can be addictive! :) Colors are fully adjustable to your preference., Numerous flight modes are available, and are easily selectable via one or more switches on your radio:, 2D:, multirotor or fixed wing leveling with or without altitude and heading hold, 3D:, direct rate 3,
Now includes V2 GPS unit! (Requires GPS firmware v1.81 update ...