Skip to content

ReadyMadeRC

FATSHARK 9G TILT AND ROLL SERVO FOR PTR

,

Replacement 9g, 90 degree servo for tilt/roll (PTR mount only)

ReadyMadeRC

FATSHARK 600TVL CMOS PAN/TILT CAM W/ 180 MG SERVO

BlackGround
WhiteVideo

Starting from the red wire:, , Red: 5V,

Latest generation light weight FPV Tuned CMOS camera on new ...

ReadyMadeRC

FATSHARK CASED TX CAM CABLE 30CM #2210

,

3p JST to 3p JST 30cm cased TX to camera ...

ReadyMadeRC

POWERBOXAV AUDIO VIDEO AND POWER DISTRIBUTION BOX

Dimensions85 x 74 x 23mm
Weight120 g
Power Requirements6-12v, 30W max power output
http//www.readymaderc.com/
http//www.readymaderc.com/
http//www.readymaderc.com/
http//www.readymaderc.com/
http//www.readymaderc.com/
http//www.readymaderc.com/
http//www.readymaderc.com/

Ships with:, 1 x 3 meter 3.5mm -> 3.5mm A/V cable (goggles -> powerbox), There are a variety of cables you can use with the Powerbox.  For power, it's the standard 2.1mm barrel connectors:, There are 1 foot cables with female RCA connectors:, There are 1.2meter and 3 meter cables with male RCA connectors:, And also 1.2 and 3 meter cables that have the mini connectors on both ends that can connect between the Powerbox and some of the FatShark goggles and the EZTracker as well:,

Ground-station Companion Today’s ground-station is typically an array of devices, ...

ReadyMadeRC

FAT SHARK DOMINATOR 5.8GHZ RECEIVER MODULE

FatShark Dominator video glasses. ..." />

These receivers are only compatible with Airwave based systems (FatShark, ImmersionRC, some others) that use the following frequencies:, 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz,

5.8GHz video receiver module for the FatShark Dominator video glasses. ...

ReadyMadeRC

FAT SHARK RCV922 AVIATOR GOGGLES 5.8GHZ UPGRADE RECEIVER MODULE

FatShark RCV922 Aviator ..." />

These receivers are only compatible with Airwave based systems (FatShark, ImmersionRC, some others) that use the following frequencies:, 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz,

Upgrade 5.8GHz video receiver module for the FatShark RCV922 Aviator ...

ReadyMadeRC

FAT SHARK DOMINATOR V2 640X480 VIDEO GLASSES

FOV (field of view)35 degrees diagonal
Interpupillary (IPD) distance57 to 73 mm (adjustable)
Optional diopter lens inserts-2, -4, -6 dpt sold separately
Power supply7 - 13 V (2S/3S supply)
Weight200g
Record rate6Mbps

Please Note:, To answer many questions about the subject, yes,, Optics:, , Audio:, , User Controls:, , Electrical:, , Power consumption (@7.4V nominal):, 350mA wireless mode, RF Modules (SOLD SEPARATELY):, , Mechanical:, , V2: 640 X 480 VGA, DVR:, , Battery:, , INCLULDED:, 7.4v 1000mAh Fatshark Battery, Includes:,

we have the latest model of Dominator V2's with the ...

ReadyMadeRC

0.3 METER (1FT) 3.5MM/3.5MM VIDEO CABLE

FatShark ..." />

,

This is a 0.3 meter video cable compatible with FatShark ...

ReadyMadeRC

DUO5800 V3 A/V DIVERSITY RECEIVER

Frequencies5740, 5760, 5780, 5800, 5820, 5840, 5860MHz
Weight200 grams
Size80 x 100 x 23mm
Input voltage range6 – 12V at 500 mA (3s Lipo Ideal)

Includes:, Duo5800 Receiver,

New V3 version with increased sensitivity and better video quality! ...

ReadyMadeRC

600MW 5.8GHZ A/V TRANSMITTER

Weight18-grams.
Size50 x 23 x 15 mm.

Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

5.8GHz 600mW Tx Great Range, Lightweight… Range The 600mW version ...

ReadyMadeRC

5.8 GHZ SPIRONET OMNI ANTENNA SET (RHCP)

FatShark. ..." />

,

New SpiroNET 5.8GHz circular polarized antenna from ImmersionRC and FatShark. ...

ReadyMadeRC

25MW 5.8GHZ A/V TRANSMITTER

Frequencies5740, 5760, 5780, 5800, 5820, 5840, 5860MHz
Weight20 grams
Size57 x 34mm
Input voltage range6 - 16 v
Input power1W (25mW), 1.5W (100mW)

Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

Compact, Lightweight, Compatible… Now smaller! The same size as the ...

ReadyMadeRC

FAT SHARK HEAD TRACKER TO EZUHF DATA CABLE - 6FT

FatShark ..." />

,

This cable will allow you to hook up your FatShark ...

ReadyMadeRC

RMRC-PICO-WIDE 5V (3.3-6V) ULTRA COMPACT WIDE ANGLE PAL

,

NOW WITH A WIDER ANGLE VIEW! 90 degree verses the ...

ReadyMadeRC

RMRC-PICO-WIDE 5V (3.3-6V) ULTRA COMPACT WIDE ANGLE NTSC

,

NOW WITH A WIDER ANGLE VIEW! 90 degree verses the ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby