HiModel
MINI USB SIMULATOR INTERFACE CABLE SIM X12
| http | //n.ethz.ch/student/mmoeller/fms/index_e.html |
Specifications:, ●USB interface unit features connectors compatible with most Futaba and JR transmitters., Visit FMS website at, to download simulator software at free of charge, then plug & play., * Simulator software is NOT included, this is the USB interface with conversion cables only., ,
Features: This is the mini size USB type simulator. The ...HiModel
3.5-7V RX BATTERY VOLTAGE LEVEL LED INDICATOR
| Wire length | 28cm |
| Working voltage | 3.5 to 7V (typically for 4.8V or 6V RX battery) |
| Connector type | Futaba/JR compatible |
| 5V above | green LED |
| 5-4.5V | Green , flash slowly |
| 4.5-4V | Red LED |
| Below 4V | Red LED, quick flash |
, , , , , , Specifications:, , , , , , , , , , , 3.5-7V RX Battery Voltage Level Indicator, Weight: 4g, Working current: , Status:, * This unit can only work under 7V, and can not connect directly to 2S Lipo., , ,
HiModel
3 IN 1 MULTIFUNCTION LCD PROGRAM BOX (INTEGRATED WITH USB ADAPTOR AND LIPO VOLTMETER)
| 1 Size | 90mm (L) * 51mm (W) * 17mm (H) |
| 2 Weight | 65g |
| 3 Input Voltage | 4.5-12.6V |
| 4 Displayer | 16*2 characters LCD. |
| 5 Interface | Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug) |
, , , , , , Specifications:, , , , , , , , , , , Specifications, (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box), , ,
Features: 1 Working Modes 1.1 Works as an individual device ...HiModel
HV SERVO DIRECT POWER SUPPLY CONNECTOR W/BEC FE-DPC-1
| Input | 6~8.4v |
| BEC output current | 2A to receiver |
| Connector type | JR/Futaba compatible |
| Wire length | 30mm |
| Weight | 13g / 0.46oz |
, , , , , , Specifications:, , , , , , , , , , , BEC output voltage: 5V, This version has one servo output, and one receiver output., * The receiver output must connect to the matching channel of the servo, for example, if the servo is for elevator, then the receiver connector should be plugged to the RX elevator channel., , ,
Features: Typical application: Use one 2S lipo to power a ...HiModel
4-WAY HV SERVO DIRECT POWER SUPPLY CONNECTOR W/BEC FE-DPC-4
| Input | 6~8.4v |
| BEC output current | 2A to receiver |
| Connector type | JR/Futaba compatible (4 connectors for servos, 4 connectors to receiver) |
| Wire length | 30mm |
| Weight | 32g / 1.13oz |
, , , , , , Specifications:, , , , , , , , , , , BEC output voltage: 5V, This version has 4 servo outputs., Wiring hint: simply plug the 4 servos to the servo outputs, and connect the matching RX connectors to the relative channels., , ,
Features: Typical application: Use one 2S lipo to power a ...HiModel
HIMODEL ON-BOARD LED 3-30V BATTERY VOLTAGE CHECKER W/JR CONNECTOR
| Dimension | 24x20x 12 mm |
| Weight | 6 grams |
| Operating Voltage | 3V to 30V per cell |
| Connector type | JR, compatible with Futaba |
| Current consumption | 4-8mA |
| Wire length | 20cm |
, , , , , , Specifications:, , , , , , , , , , , * This voltage checker only have two wires for input, and it using a JR connector for input, you can not connect it directly to a balance connector of a battery pack., For the type which can plug directly to the balance connector of a battery pack, refer to, MINIBC6S, instead., * Wrong polarity will damage the device, and not covered by warranty., , ,
Features: This voltage checker is designed for on-board use, it ...HiModel
60-CORE WIRE LARGE CURRENT SERVO EXTENSION 100CM
| Length | 100 CM |
| Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires Servo Extension, , ,
Includes/Requires: Includes:1 x servo extensionHiModel
60-CORE WIRE LARGE CURRENT Y LEAD 15CM
| Length | 15 CM |
| Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires large current Y lead, , ,
Includes/Requires: Includes:1 x Y leadHiModel
3-IN-1 15A UBEC STEP DOWN SWITCH HARNESS W/LED VOLTAGE METER
| Input volt range | 6V to 13V |
| Max Current | 0-15A ( MAX |
| Output voltage | 4.8-9.6V (stepless adjustable, factory default voltage |
| Wire type | silicon wire |
| Connector Type | output Futaba/JR compatible |
| Weight | 60g |
| Dimension | 64mm ( L ) * 27mm ( W) * 35mm ( H ) |
, , , , , , Specifications:, , , , , , , , , , , 3-in-1 15A UBEC Step Down Switch Harness W/LED Voltage Meter, input JST connector, , ,
Features: Using ultra high brightness led segment which can ...HiModel
60-CORE WIRE LARGE CURRENT SWITCHING HARNESS W/CHARGING PORT
| Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core Wires Large Current Switching Harness W/Charging Port, , ,
Includes/Requires: Includes: 1 x Switching Harness W/Charging PortHiModel
60-CORE WIRE LARGE CURRENT SERVO EXTENSION 50CM
| Length | 50 CM |
| Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires Servo Extension, , ,
Includes/Requires: Includes:1 x servo extensionHiModel
TWISTED SERVO EXTENSION 30CM
| Length | 30 CM |
| Connector | compatible with both JR & Futaba |
, , , , , , Specifications:, , , , , , , , , , , Twisted Servo Extension, , ,
Features: Twisted wire eliminates the interference. Includes/Requires: Includes:1 x servo ...HiModel
TWISTED SERVO EXTENSION 50CM
| Length | 50 CM |
| Connector | compatible with both JR & Futaba |
, , , , , , Specifications:, , , , , , , , , , , Twisted Servo Extension, , ,
Features: Twisted wire eliminates the interference. Includes/Requires: Includes:1 x servo ...HiModel
TWISTED SERVO EXTENSION 100CM
| Length | 100 CM |
| Connector | compatible with both JR & Futaba |
, , , , , , Specifications:, , , , , , , , , , , Twisted Servo Extension, , ,
Features: Twisted wire eliminates the interference. Includes/Requires: Includes:1 x servo ...HiModel
60-CORE WIRE LARGE CURRENT SERVO EXTENSION 10CM
| Length | 10 CM |
| Connector | compatible with both JR & Futaba |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires Servo Extension, , ,
Includes/Requires: Includes:1 x servo extension