SDSHobby
MAX FORCE 25C∕2200MAH∕11.1V LIPO BATTERY
Max Charging Current | 5C/11A |
Max Cont. Discharging Current | 25C/55A |
Max Burst Discharging Current | 50C/110A |
Size | H26*W34*L105mm |
Net Weight | 182g |
Plug Type | Deans Plug and Balance Chargeable Plug |
Specifications:,
SDSHobby
MAX FORCE 20C∕2200MAH∕11.1V LIPO BATTERY
Max Charging Current | 5C/11A |
Max Cont. Discharging Current | 20C/44A |
Max Burst Discharging Current | 40C/88A |
Size | H26*W34*L105mm |
Net Weight | 182g |
Plug Type | Deans Plug and Balance Chargeable Plug |
Specifications:,
SDSHobby
MAX FORCE 2000MAH/ 11.1V LI-PO BATTERIES FOR JR, FF9, EX10 ETC. TRANSMITTER
Max Charging Current | 5C/10A |
Size | L111*W25*H22 mm |
Net Weight | 180g |
Plug Types | JR&FUTABA Plug |
Application | JR, FF9, EX10 etc. transmitter |
Specifications:,
ï1⁄4‹ Balance Chargeable PlugSDSHobby
MAX FORCE 2000MAH/11.1V LI-PO BATTERIES FOR 3PK, M11, 4VF ETC. TRANSMITTER
Max Charging Current | 5C/10A |
Size | L111*W55*H14 mm |
Net Weight | 228g |
Plug Types | FUTABA Plug |
Application | 3PK, M11, 4VF etc. transmitter |
Specifications:,
ï1⁄4‹ Balance Chargeable PlugSDSHobby
LED SLIDE SWITCH + SAFE PROTECTIVE COVER/ EMULATIONAL STARTING SWITCH
Input voltage of LED switch | DC 12V |
Attention | Color will be sent randomly. |
Product Description:, Application: suitable for DIY some electronic equipment, also use for fire control switch on the plane, missile launching switch and forcing burner switch etc.. Now it is widely used on automotive refit.,
R2Hobbies
TURBORIX RC PLANE 1070KV (RPM/V) 162W OUTRUNNER BL BRUSHLESS MOTOR
rpm/v (kv) | 1070 |
Suggested Battery | 2-3 Cells Lithium Polymer Battery |
Load Current (A) | < 15A |
Recommended ESC | Turborix Advance 20A ESC |
Suggested Propellers | 8 X 3.8" - 11 X 4.7" |
Weight | 60g (±5g) |
Gross Weight | ~80g |
Hobby-Lobby
AXI GOLD 2217/5H HELICOPTER OUTRUNNER
1:10, Technical Specifications:, Motor Diameter:, 28mm, Shaft Diameter:, 3.17mm, KV:, 3000 Kv, Voltage Range:, 11.1V, Max Amperage:, 34 Amps, Weight:, 2.5 oz., Propeller Size:, Heli,
For SPEED 480/500 size airplanes, but provides much more power ...Hobby-Lobby
AXI GOLD 2217/5H HELICOPTER OUTRUNNER
,
For SPEED 480/500 size airplanes, but provides much more power ...RCPlanet
VENOM 550 4200KV & 80A WATERPROOF ESC COMBO VNR1395
, ESC, Continuous Current:, 80A, Battery Cell Count:, 2-4 LiPo, Dimensions:, 49 x 44 x 30mm, Weight:, 3.13oz (89g), BEC:, 3A/5V, Switching Programmable:, Yes, Battery Connector:, EC3, Motor, Rpm/V (Kv):, 4200, Battery Cell Count:, 2-3 LiPo, Dimensions:, 1.4 x 2.4" (35mm x 60mm), Weight:, 7.55oz (214g), Max Current:, 60 amps, Shaft Size:, 0.12" (3.17mm), ,
FEATURES: Ideal for all 4 wheel drive short course trucks ...RCPlanet
ALIGN 250 BRUSHLESS MOTOR (3400KV) RCM-BL250 AGNKX880001A
, Input voltage:, DC7.4-11.1V 2-3cell Li-Po, Max continuous current:, 13A/16A (30sec), Max output power:, Approx. 140w/170W (30sec), kV value:, 3400KV, Dimension:, spindle 2.5x24.8x22mm, Weight:, Approx. 30g, ,
Align outrunner not only has superior torque and the explosive ...HiModel
EZRUN-18A BRUSHLESS ESC FOR 1/18 CAR (SPORTFUL RACE) V2
● Output | Continuous current 18A, burst current 50A. |
● Input | 4-9 cells NiMh/NiCd or 2-3 cells LiPo. |
● BEC Output | 6V/1A. |
● Resistance | 0.01 Ohm. |
● Motor Supported | Sensorless Brushless Motor |
● Suitable Brushless Motor | 12T and > 12T |
● Suitable Car | 1/18 on-road or off-road cars / trucks for normal race or sportful race. |
● Size | 31.5mm(L) * 24mm(W) * 15mm(H). |
● Weight | 19g(Without wires) |
, , , , , , Specifications:, , , , , , , , , , , Specification:, Programmable Items, , ,
Features: Features: ● Compatible with all sonsorless brushless motor. ● ...HiModel
EZRUN-25A BRUSHLESS ESC FOR 1/10 CAR W/REVERSE (SPORTFUL RACE)25A-L V2
● Output | Continuous current 25A, burst current 90A. |
● Input | 4-9 cells NiMh/NiCd or 2-3 cells LiPo. *Note1 |
● BEC Output | 6V/1.5A. |
● Resistance | 0.0015 Ohm. |
● Motor Supported | Sensorless Brushless Motor |
● Suitable Brushless Motor | 9T and > 9T |
● Suitable Car | 1/10, 1/12 on-road or off-road cars / trucks for normal race or sportful race. |
● Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
● Weight | 30g(Without wires) |
For 4-6 Cell Ni-xx | You needn't change the fan coming with the ESC; |
, , , , , , Specifications:, , , , , , , , , , , Specification:, *Note1:, For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);, Programmable Items, , ,
Features: Features: ● Compatible with all sonsorless brushless motor. ● ...HiModel
EZRUN-35A BRUSHLESS ESC FOR 1/10 CAR W/REVERSE (SPORTFUL RACE) V2
●Output | Continuous current 25A, burst current 90A. |
●Input | 4-9 cells NiMh/NiCd or 2-3 cells LiPo. *Note1 |
●BEC Output | 6V/1.5A. |
●Resistance | 0.0015 Ohm. |
●Motor Supported | Sensorless Brushless Motor |
●Suitable Brushless Motor | 9T and > 9T |
●Suitable Car | 1/10, 1/12 on-road or off-road cars / trucks for normal race or sportful race. |
●Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
●Weight | 30g(Without wires) |
For 4-6 Cell Ni-xx | You needn't change the fan coming with the ESC; |
, , , , , , Specifications:, , , , , , , , , , , Specification:, *Note1:, For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);, Programmable Items, , ,
Features: Features: ●Compatible with all sonsorless brushless motor. ●Use top ...3 Reviews
HiModel
3 IN 1 MULTIFUNCTION LCD PROGRAM BOX (INTEGRATED WITH USB ADAPTOR AND LIPO VOLTMETER)
1 Size | 90mm (L) * 51mm (W) * 17mm (H) |
2 Weight | 65g |
3 Input Voltage | 4.5-12.6V |
4 Displayer | 16*2 characters LCD. |
5 Interface | Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug) |
, , , , , , Specifications:, , , , , , , , , , , Specifications, (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box), , ,
Features: 1 Working Modes 1.1 Works as an individual device ...HiModel
EZRUN-60A-L BRUSHLESS ESC FOR 1/10 CAR (SPORTFUL RACE) V2
● Output | Continuous current 60A, burst current 380A. |
● Input | 4-9 cells NiMh/NiCd or 2-3 cells LiPo. Note1 |
● BEC Output | 6V/1.5A. |
● Resistance | 0.00075 Ohm. |
● Motor Supported | Sensorless Brushless Motor |
● Suitable Brushless Motor | 5.5T and > 5.5T |
● Suitable Car | 1/10 on-road or off-road cars / trucks for normal race or sportful race. |
● Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
● Weight | 32g(Without wires) |
For 4-6 Cell Ni-xx | You needn’t change the fan coming with the ESC; |
, , , , , , Specifications:, , , , , , , , , , , Specification:, Note1:, For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);, Programmable Items, , ,
Features: Features: ● Compatible with all sonsorless brushless motor. ● ...